Download Specifications

CAMPUS CHILLED WATER PIPING – UNIVERSITY OF NORTH GEORGIA
Spencer Bristol Engineering, Inc.
2.
3.
4.
5.
6.
7.
8.
Equipment layout plans, drawn to ¼”=1’-0”, showing the space arrangement of
electrical spaces such as main service equipment area, electrical closets, and
each area where electrical distribution equipment is to be installed. Base layout
on dimensions of the equipment actually submitted for use on the project.
Construction materials.
Listing and Labeling Agency labels where required.
Accessories specified.
Manufacturer, make and model number.
Weights and dimensional data of all major items of equipment.
A space large enough to accept a submittal review stamp. Provide a space
approximately 2 by 3 inches beside title block.
G.
Record Documents: Refer to Division 01 for requirements for record documents, as-built
drawings, and related submittals.
H.
Closeout Submittals and Maintenance Material Submittals: Comply with requirements
specified in Division 01 Section "Closeout Procedures."
I.
Certificates and Certifications Submittals: Provide a statement that includes signature of
entity responsible for preparing certification. Certificates and certifications shall be
signed by an officer or other individual authorized to sign documents on behalf of that
entity.
J.
Test and Inspection Reports Submittals: Comply with requirements specified in Division
01 Section "Quality Requirements."
K.
A tabulation of the various "Equipment/Material" components of the electrical system
requiring submittal data follows. Where special requirements exist for product data, shop
drawings, manufacturers' certification, certification of installer’s qualifications, product
test reports, field test reports or operation and maintenance manuals, relating to particular
items, they will be found under the appropriate section of these specifications.
1.
2.
3.
4.
Wires and Cables
a.
Wires and Cables
b.
Connectors
c.
Terminations
Grounding
a.
Connectors
b.
Terminations
Conduits and Boxes
a.
Conduits
b.
Fittings
c.
Accessories
d.
Boxes
e.
Steel Slotted Support Systems
f.
Raceway and Cable Supports
g.
Conduit and Cable Support Devices
h.
Mounting, Anchoring, and Attachment Components
Electrical Acceptance Testing
a.
Qualification Data for testing agency
b.
Field quality-control test reports
SCHEDULE OF SUBMITTAL DATA
16011-3