Download User Manual

D/A Converter
Power
D/A Converter
User Manual
USB
Coax
Opt
Source
Dear User,
Thank you for purchasing BRIK Digital/Analogue Converter.
Please read this User Manual before operating the machine to ensure its
best performance and your safety.
Instructions:
Connecting Source
Connect to music sources that have a digital output (eg. CD Player, DVD
Player, Computer, etc.) through USB, Coaxial, or Optical input.
Connecting Amplifier
Connect the Output socket to a line input on an amplifier. According to your
preference, choose 1V or 2V output level.
Connecting Power
Before connecting, check the label to ensure the local power supply is
compliant, and then connect the low voltage plug from the power supply to the
12V In socket and switch the machine on.
Only use approved BRIK power supply. The use of other adaptors or
supplies could seriously damage this item.
Choosing Source
Use the switch on the front panel to choose the music source.
When connecting to a computer, if the sound does not come out, please stop
playing and then restart playing to ensure the computer is sending out the signal
through the digital output.
D/A Converter
Power
USB
Coax
Opt
Source
Specifications:
INPUT OPTION
USB x 1
OPTICAL x 1
COAXIAL x 1
ANALOG RCA OUTPUT x 1
1V AND 2V SELECT SWITCH x 1
± 0.2 V
< 0.05%
100 dB
< 600 OHM
100 dB
± 3 dB (20~20KHz)
W 140 x H 48 x D160 mm
1000 g
OUTPUT OPTION
OUTPUT LEVEL
DISTORTION
S/N
OUTPUT IMPEDANCE
SEPARATION
FREQUENCY RESPONSE
DIMENSION
WEIGHT
NOTE
- BRIK D/A Converter operates in accordance with its specifications within
environment temperature 40 degrees Celsius.
WARNING
- Never open the case of this item as this will invalidate the guarantee. There
are no user adjustments inside. Please refer all service work to an authorized
BRIK agent.
- This item shall not be exposed to dripping or splashing liquid, and that no
objects filled with liquids, such as vases, shall be placed on the apparatus.
Output
USB
L
R
D/A Converter
Input
Coaxial
Optical
Output
Level
1V 2V
Made In Taiwan
12V In
WWW.BRIK-AUDIO.COM
The information was correct at the time of going to press. The manufacturer reserves
the rights to make changes to the technical specification without prior notice.
The manufacturer accepts no responsibility for damage caused by not adhering to
these instructions for use. Modification or change to any part of the product by
unauthorized persons releases the manufacturer from any liability over and above the
lawful rights of the customer.
BRIK 2011