Download User Manual
Transcript
Equalizer Stage Power 32Hz 62.5Hz 125Hz 250Hz 500Hz 1K 2K Equalizer Stage User Manual 4K 8K 16K Dear User, Thank you for purchasing BRIK Equalizer Stage. Please read this User Manual before operating the machine to ensure its best performance and your safety. Instructions: Connecting Source Connect D/A Converter, Bluetooth Stage, Internet Radio, Phono Stage, CD Player, or other line level sources through Input on the rear panel. Connecting Amplifier Connect the Output socket to a line input on an amplifier. Connecting Power Before connecting, check the label to ensure the local power supply is compliant, and then connect the low voltage plug from the power supply to the 12V In socket and switch the machine on. Reinforcing Sound Reinforce sound with the 10 selections on the front panel - Upward for plus (+10dB+2dB) & Downward for minus (-10dB+2dB). Use the By Pass / EQ selection on the rear panel to bypass or pass the signals through Equalizer Stage. Equalizer Stage Power 32Hz 62.5Hz 125Hz 250Hz 500Hz 1K 2K 4K 8K 16K Specifications: INPUT OPTION OUTPUT OPTION ANALOGUE RCA INPUT x 1 ANALOGUE RCA OUTPUT x 1 BY PASS / EQ SELECTION x 1 2V <0.035% FLAT - 100 dB A-WEIGHTED - 106 dB < 650 OHM ±10 dB W 140 x H 48 x D160 mm 1000 g OUTPUT LEVEL DISTORTION S/N OUTPUT IMPEDANCE CONTROL RANGE DIMENSION WEIGHT NOTE - BRIK Equalizer Stage operates in accordance with its specifications within environment temperature 40 degrees Celsius. WARNING - Never open the case of this item as this will invalidate the guarantee. There are no user adjustments inside. Please refer all service work to an authorized BRIK agent. - This item shall not be exposed to dripping or splashing liquid, and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Input Output L L R R By PASS EQ Equalizer Stage Made In Taiwan DC 12V 50mA In WWW.BRIK-AUDIO.COM The information was correct at the time of going to press. The manufacturer reserves the rights to make changes to the technical specification without prior notice. The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use. Modification or change to any part of the product by unauthorized persons releases the manufacturer from any liability over and above the lawful rights of the customer. BRIK 2011