Download Universal Trip Computer (UTCOMP-3
Transcript
V • full support for vehicles with LPG system • independent measurements of distance & fuel consumption signal from LPG electrovalve or injector (ref. to section 2.4.9) for PB and LPG (with auto-recognition of current fuel supply) VI VII VIII 1 + req. of groups III & IV • fuel level in fuel tank(s) • estimated distance to refuel • low fuel level alert (configurable) (measurement from sensor) • headlights reminder (for the vehicle in traffic) signal from headlights relay • dimmer (2 modes of brightness e.g. day/night) • fan cooler status (on/off) req. of groups III, IV, (V) (differential measurement) or fuel level signal (ref. to section 2.4.7) signal from fan cooler relay (ref. to section 2.4.7) 0 (1) 1 1 from fuel consumption signal (some IX • RPM petrol engines) or signal from RPM hall 0 (1) sensor • boost/turbo pressure + alerts + real-time chart • oil pressure + alerts + real-time chart XI • lean/reach real-time chart from O2 sensor XII • air fuel ratio (AFR) + alerts + real-time chart XIII • exhaust temperature (EGT) + alerts + real-time chart X pressure sensor (voltage or resistance type) 1 - for each sensor signal from o2 lambda sensor 1 signal from wideband o2 controller 1 signal from EGT controller 1 req. of groups III & IX (measurement XIV • gear indicator from gear ratio) or signal from gear 0 (1) position sensor XV • data logger function available only in UTCOMP-PRO - 10 - -