Download A/85:2013

Transcript
ATSC A/85:2013
Establishing and Maintaining Audio Loudness, Annex H
12 March 2013
c) Employ a real-time loudness processing device to match the Dialog Level of non-conformant
content to the target value.
Key Idea: Ensure that all program and commercial audio content matches the dialnorm
value of the AC-3 encoder. Use a BS.1770 meter to verify the Dialog Level of the audio
content.
H.9 AFFILIATE DIALNORM SETTING
See Section 7.3.5 of the RP.
An operator (affiliate, station, MVPD, etc.) receiving content that is delivered at a fixed
loudness, where there is no gain adjustment or processing after the receiver, should set the value
of dialnorm in the operator’s AC-3 encoder to match the network originator’s specified Dialog
Level. If a fixed gain or loss is applied in the signal chain, the AC-3 encoder dialnorm value needs
to be offset accordingly from the originator’s Dialog Level.
If loudness processing is applied to the originator’s audio, the processor’s Target Loudness
value should match the operator’s AC-3 encoder ‘s dialnorm value. See Section 9.3 for additional
background on audio processing.
Key Idea: Set the AC-3 encoder’s dialnorm value to the originator’s Dialog Level (as
adjusted).
H.10
TV STATION OR MVPD CONTENT INSERTION
In the case of TV station or MVPD insertion of local commercials or segments, the operator should
ensure that the Dialog Level of the local insertion matches the dialnorm setting of the inserted audio
stream.
Key Idea: Ensure that the Dialog Level of inserted content matches the dialnorm setting
of the inserted audio stream.
If the network originator’s feed is decoded to baseband, the loudness of the decoded audio is
to be measured and the value of the re-encoder’s AC-3 dialnorm value is set to match the measured
loudness for the next stage of encoding. In this case either the operator needs to modify the network
originator’s loudness to match the target value of the operator’s system, or the originator’s
loudness value (as measured) will be used as the dialnorm value in the next stage of AC-3 encoding.
At this re-encoding stage the operator needs to also ensure that the other audio metadata parameters
are set appropriately.
65