Download Model UP550 Program Controller User`s Manual for

i
<Toc> <Rev>
Introduction
Thank you for purchasing the UP550 program controller.
■ How to Use the Manuals
Purpose
Title
Description
Setup
1. Installation
Describes the tasks (installation, wiring, and others)
required to make the controller ready for operations.
Basic operation
2. Initial Settings
Program creation
3. Programming
Describes examples of setting PV input types and
control output types. Making settings described herein
and program creation in “3. Programming” allows you to
carry out basic control.
Describes examples of creating basic programs. The
use of the program pattern setup charts included in the
“3.7 Program Pattern Setup Charts” is recommended.
General understand- 3.5 Program Parameter Map
ing of programming 3.6 Lists of Program Parameters
operations
Operating
4. Operations
procedures
and troubleshooting
Brief operation
Contains a parameter map that serves as a guide to
creating programs. Also includes a brief explanation
of the functions of program parameters.
Describes key operation sequences. For operation
control through external contact inputs, see
“1.5 Terminal Wiring Diagrams”.
6.1 Parameter Map
Contains the parameter map used as a guideline for
setting parameters.
Function description 6.2 Lists of Parameters Briefly describes the functions of parameters. In addition,
each parameter table has a User Setting column, where
and setpoint
you can record your setpoints when setting them in the
recording
controller.
■ Controllers Applicable to Cascade Control
The specification codes of the UP550 applicable to cascade control are given in the table
below.
UP550-01
UP550-11
UP550-21
■ Regarding This User’s Manual
(1) This manual should be provided to the end user. Keep an extra copy or copies of the
manual in a safe place.
(2) Read this manual carefully to gain a thorough understanding of how to operate this
product before starting operation.
(3) This manual describes the functions of this product. Yokogawa M&C Corporation
(hereinafter simply referred to as Yokogawa) does not guarantee the application of
these functions for any particular purpose.
(4) Under absolutely no circumstances may the contents of this manual, in part or in
whole, be transcribed or copied without permission.
(5) The contents of this manual are subject to change without prior notice.
(6) Every effort has been made to ensure that the details of this manual are accurate.
However, should any errors be found or important information be omitted, please
contact your nearest Yokogawa representative or our sales office.
Media No. IM 05E01C02-44E (CD)
1st Edition : May 2000 (YK)
All Rights Reserved Copyright © 2000, Yokogawa M&C Corporation
IM 05E01C02-44E
1st Edition : May 31,2000-00