Download Multicam 9.00 User manual

Version 9.00
EVS Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
4.10.3
A UDIO M ETERS ON OSD
Possible values: Yes (default) / No
This parameter enables/disables the display of audio meters at the bottom
of each output monitor.
4.10.4
A UDIO M ETERS A DJ .( D B)
Possible range: -12 to +12 by 2 dB steps. Default: 0 dB
This parameter allows adjusting the sensitivity of audio meters on the OSD
of the output monitors. A positive value means that the meters will be more
sensitive.
4.10.5
A UX T RACK O UTPUT
Possible values: Prv / Prv&7-8/15-16 / PGM
This parameter defines to which audio outputs the Aux. Track of the playlist
will be played out of.
Value
Meaning
PRV (default)
The Aux. Track will use the audio outputs normally
assigned to the PRV channel. If no PRV channel is
available, the Aux Track will not be assigned to any audio
output.
PRV&7-8/15-16
The Aux. Track will use the audio outputs normally
assigned to the PRV channel if there is one, plus all the
audio outputs from 7-8/15-16 that have not yet been
assigned to another channel. Use this option if you need
an aux track without PRV channel available.
PGM
The Aux. Track will use the audio outputs normally
assigned to the PGM channel.
Audio
p.5.2
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
This page is intentionally left blank and is reserved for future developments.
30