Download Contents - Alcatel-Lucent Documentation Center

Configuration Management/Provisioning
Parameters/
Buttons
CC id
Service Provisioning
Description
This field shows either the id of the current communication
channel (CC) used for the primary feeder, or empty if no correctly configured CC is available, or the value the user has
entered.
Possible values:{0, 65503}.
NOTE:
Although 65503 is the maximum value, only 47 communication channels can exist for a V5.2 Interface.
OK
This button is available only if a change was made, i.e. either
a CC id was entered, or a feeder was selected, or both. It will
use the current data to modify the configuration such that the
selected feeder and CC id will identify the primary feeder.
Complete the following procedure to edit/view a primary link.
Procedure
Step
Procedure
1.
Select an appropriate feeder in the Primary Link Selection list.
2.
Enter/change the CC id.
3.
Click on OK to confirm or click on Close to exit the window without action.
NOTE:
When a primary link is created the following entities are automatically created: time slot 16 is set to CC type, a CC with the defined CC id is created
and cross-connected to that slot, communication paths Control, Link Control and BCC are created and cross-connected to that CC.
5.4.4
Add Secondary V5.2 Link
This windows displays V5 secondary link information. The secondary link configuration of a V5.2 Interface identifies the V5 Link that is selected to carry the protection group number 1 (protection protocol).
NOTE:
The configuration of a secondary link is only possible if a primary link is already configured.
The Secondary Link window can only be reached from the V5.2 Interface window
(cf. Chapter 5.4.1.2, page 5-90) by clicking on Set Secondary....
AEM-NB R1.3
363-211-412
Version 1.00
(08.99)
5-111