Download user manual

HAIR/SKIN DIAGNOSTIC SCOPE
USER MANUAL
ST-6400A
ST-6400A
PLEASE READ THIS USER MANUAL CAREFULLY BEFORE
USING THE INDIGO VIEWER ST6400A
User Manual
Product Introduction
Indigo Viewer is a diagnostic microscope designed to evaluate skin, scalp and
hair conditions. With lens magnifications up to 650 times, the Indigo Viewer helps
professionals identify and recommend proper treatments for potential skin, scalp
and hair damage.
A. PRODUCT FEATURES
1. Connects directly to any LCD monitor or television.
2. Split screen function provides four (4) screen images.
3. Freeze frame function to capture clear images for analysis.
4. Flash memory saves up to seven (7) captured images for comparison.
5. Remote control.
6. Adjustable image enlargement.
ST-6400A
PLEASE READ THIS USER MANUAL CAREFULLY BEFORE
USING THE INDIGO VIEWER ST6400A
User Manual
Product Introduction
Indigo Viewer is a diagnostic microscope designed to evaluate skin, scalp and
hair conditions. With lens magnifications up to 650 times, the Indigo Viewer helps
professionals identify and recommend proper treatments for potential skin, scalp
and hair damage.
A. PRODUCT FEATURES
1. Connects directly to any LCD monitor or television.
2. Split screen function provides four (4) screen images.
3. Freeze frame function to capture clear images for analysis.
4. Flash memory saves up to seven (7) captured images for comparison.
5. Remote control.
6. Adjustable image enlargement.
User Manual
ST-6400A
Warranty
B. Operating Instruction
1.HANDSET FREEZE FRAME FUNCTION:
Thank you for purchasing Indigo Viewer. In order to provide our excellent
after-sales service, please note the important items below:
Lens
Image Capture/Save
1.Repair Policy:
We provide a one year warranty the Indigo Viewer. Within one year,
if there are any problems of our products, please return to the
seller for repair.
Split Screen Button
Handle
Note:
2.This warranty does not cover:
a. Damage due to misuse and abuse such as improper voltage supply,
dropping or inserting foreign objects inside the scope.
b. Tampering such as repair or attempted repair by unauthorized parties.
c. Defects caused by improper installation.
d. Defects caused by natural disaster.
e. Scopes purchased on Ebay
A. Single Screen:
Place the lens on the desired area and then make the necessary adjustment
to focus on the image. To capture/save an image, press and hold the freeze
frame button for approximately 1 second. Press freeze frame button again to
save the image. To delete the image, press the delete button on the remote
control.
B. Spilt Screen (4 screens):
1.Press the Split Screen button to generate the four area split screen
view.
2.Press the Freeze Frame button to capture the image in the upper-left
area of the split screen (Quadrant 1). Subsequent pressing of the
Freeze Frame button with capture images in the other quadrants in
clockwise order (i.e., Quadrant 2: upper-right, Quadrant 3: lower-left,
and Quadrant 4: lower-right).
3.Use the remote control to zoom in or delete images based on their
quadrant location (see “Remote Control Functions”).
4.Press freeze frame button again to save the image.
5.Press to simultaneously delete the four photos.
One Year Limited Warranty
Date of purchase
Model Number
Purchase from
Full Name
We guarantee this professional product to be in perfect working condition
at the date of purchase and free from manufacturing defects or faulty
materials. Our One Year Limited Warranty covers free replacement of
defective parts due to faulty materials or workmanship. Fee for warranty
service is $25.00, with a copy of the original receipt.
To validate this warranty, please scan and e-mail this warranty to the
following e-mail address: [email protected]
User Manual
ST-6400A
ST-6400A
D. TROUBLESHOOTING
2. REMOTE CONTROL FUNCTIONS:
Item
Problem
1
Can't operate after switching
on the power button.
Check that adapter is plugged in properly.
2
Lens LEDs not illuminated.
Check if the lens is connected properly with the
handle.
3
Base unit is overheating.
4
5
Solution
Down button for next
saved images
a. Turn off the power to cool the unit down.
b. Check if the voltage is abnormal.
No image appears on TV or
computer screen.
The image is fuzzy or blurry
during operation.
User Manual
Ensure that the handset is connected properly
to the TV or to the computer.
Up button for previous
saved images
Delete button for the
single screen
Zoom in Quadrant 1
Zoom in Quadrant 2
Zoom in Quadrant 3
Zoom in Quadrant 4
a. This is part of the normal warming up
process when the device has just been
switched on for the first time. The problem
will correct itself after a short period of time.
Delete Quadrant 1
Delete Quadrant 2
b. Check for the condensation of the lens.
Delete Quadrant 3
Delete Quadrant 4
Split screen
Freeze/ save
a. Ensure that the monitor/screen is clean.
6
The saved image has
stains/markings on it.
b. Ensure that the lens is clean and free of dust.
.
c. Contact the manufacturer if the above
suggestions fail to solve the problem.
Delete all
User Manual
ST-6400A
ST-6400A
3. INDIGO VIEWER (FRONT):
User Manual
C. SET UP INSTRUCTIONS:
Freeze Frame
System Setup Instruction
Lens
Split Screen
Handle
Base
(a). Plug the handset connector into the port on the base unit. Important:
First ensure that the pins are correctly aligned with the holes in the
port. Then push the connector in completely. (See picture 1)
(b). Locate the VGA connector on the back of the base unit and plug it into
your LCD screen. (See picture 2 and 3)
(C). Plug power cord into DC IN connector on the back of the base unit and
then plug the DC adaptor into the power outlet. (See picture 4)
Power
IR
Handset Connector
4. INDIGO VIEWER (BACK):
VGA Connector
Picture 1
Picture 2
Picture 3
Picture 4
Power Adapter
User Manual
ST-6400A
ST-6400A
3. INDIGO VIEWER (FRONT):
User Manual
C. SET UP INSTRUCTIONS:
Freeze Frame
System Setup Instruction
Lens
Split Screen
Handle
Base
(a). Plug the handset connector into the port on the base unit. Important:
First ensure that the pins are correctly aligned with the holes in the
port. Then push the connector in completely. (See picture 1)
(b). Locate the VGA connector on the back of the base unit and plug it into
your LCD screen. (See picture 2 and 3)
(C). Plug power cord into DC IN connector on the back of the base unit and
then plug the DC adaptor into the power outlet. (See picture 4)
Power
IR
Handset Connector
4. INDIGO VIEWER (BACK):
VGA Connector
Picture 1
Picture 2
Picture 3
Picture 4
Power Adapter
User Manual
ST-6400A
ST-6400A
D. TROUBLESHOOTING
2. REMOTE CONTROL FUNCTIONS:
Item
Problem
1
Can't operate after switching
on the power button.
Check that adapter is plugged in properly.
2
Lens LEDs not illuminated.
Check if the lens is connected properly with the
handle.
3
Base unit is overheating.
4
5
Solution
Down button for next
saved images
a. Turn off the power to cool the unit down.
b. Check if the voltage is abnormal.
No image appears on TV or
computer screen.
The image is fuzzy or blurry
during operation.
User Manual
Ensure that the handset is connected properly
to the TV or to the computer.
Up button for previous
saved images
Delete button for the
single screen
Zoom in Quadrant 1
Zoom in Quadrant 2
Zoom in Quadrant 3
Zoom in Quadrant 4
a. This is part of the normal warming up
process when the device has just been
switched on for the first time. The problem
will correct itself after a short period of time.
Delete Quadrant 1
Delete Quadrant 2
b. Check for the condensation of the lens.
Delete Quadrant 3
Delete Quadrant 4
Split screen
Freeze/ save
a. Ensure that the monitor/screen is clean.
6
The saved image has
stains/markings on it.
b. Ensure that the lens is clean and free of dust.
.
c. Contact the manufacturer if the above
suggestions fail to solve the problem.
Delete all