Download H18 AT Command User Guide

of the calling party when receiving a mobile terminated call.
Defined values
<n>: integer type, sets /shows the result code presentation status in TA
0
1
Disable
Enable
<m>: integer type, shows the subscriber CLIP service status in the network
0
1
CLIP not provisioned
CLIP provisioned
2
Unknown (e.g. no network, etc.)
Informative examples
- Initial the HyperTerminal
- Initial the MS
- AT Command
(1) ACTIVATE
AT+CLIP=1
OK
AT+CLIP?
+CLIP: 1, 1
(As incoming call occurs, ms will display the unsolicited result code.)
RING
(1)+CLIP: "0920123456",129,"",,"APPLE",0 (AT+CSCS=”IRA”)
(2)+CLIP: "",128,,,,1
(2) DEACTIVATE
AT+CLIP=0
OK
AT+CLIP?
+CLIP:0,1
(3) INTERROGATION
AT+CLIP?
+CLIP: 0,1
OK