Download M20 User manual

AT+CMGS=?
OK
OK
AT+CMGS="0921214863"
> TEST
+CMGS: 230
OK
OK
Send Message from Storage +CMSS
Table: +CMSS Action Command Syntax (text)
Command
Possible response(s)
if text mode (+CMGF=1): If text mode (+CMGF=1) and sending
+CMSS=<index>[,<da>[,< successful:
toda>]]
+CMSS: <mr>
if sending fails:
+CMS ERROR: <err>
Description
Execution command sends message with location value <index> from
preferred message storage <mem2> to the network (SMS-SUBMIT). If new
recipient address <da> is given for SMS-SUBMIT, it shall be used instead of the
one stored with the message. Reference value <mr> is returned to the TE on
successful message delivery. If sending fails in a network or an ME error, final
result code +CMS ERROR: <err> is returned. This command should be abortable.
Defined values
<index>: integer type
<da>: string type
<toda>: integer type
Informative examples
-Initial the HyperTerminal
-Initial the MS
-AT Command
AT+CMGF=1
OK
©2004 BenQ Corporation.
M22 AT COMMAND LIST
Confidential Property
121
Version: 0.3.0 – 2004/6/9