Download - Aplisens SA

Transcript
3. Final step
At the end, a summary is displayed.
The button End finishes calibration.
The button Back returns to the previous step of the wizard.
If you choose Cancel, the wizard will be closed and you will return to the main window.
Note: Cancelling calibration is possible with the command:
•
•
6.5
For pressure transmitters Cancel analog output calibration in Transmitter
parameters window
For temperature transmitters Analog output trim in Factory settings tab.
Zeroing first PV process variable
Transmitter zeroing is used to eliminate characteristics shift after a transmitter assembly on
an object.
Transmitter readings will be corrected, if the following function will be enabled at zero
installation pressure:
•
Operations -> Basic functions -> Zeroing -> Zero PV.
It does not apply to absolute pressure transmitters.
50