Download User manual - Network Webcams

4) RS485
• RS485 Setting:
- DOME ID: Enter identification number for external PTZ device. The DOME ID can be
adjusted in the range 1 ~ 3999.
- Protocol: Selects PTZ protocol to communicate with external PTZ device.
- Baud rate: Selects one of the Baud rate.
- Parity: Selects one of the Parity bit.
5) View Angle
• View Angle Setting:
- Tilt angle limit: This option is designed to limit the view angle as there is some obstruction
in zooming out on specific areas of the tilt angle. -10 (Above horizon) +10 (Below horizon)
VK2-1080XPTZ User Manual V1.0
51