1
Download CNH FM-1000 Integrated Display
Transcript
5 The System Plugin C CAUTION – Do not use a sharp item, such as a pencil, to press the screen or you may damage the surface of the screen. Use your finger to press the screen. The cross-hair appears on another part of the touch screen. 7. Repeat Step 6 eight times. When the calibration sequence finishes, a dialog appears: – If your responses were accurate enough, the following message appears: You have successfully calibrated your touch screen. – If your responses were not accurate enough, the following message appears: Your screen calibration failed. The difference between actual and calculated points was too large. 8. Tap OK. You are returned to the Configuration screen. If the calibration was successful, proceed to Configuring the display. If the calibration failed, tap Calibrate again and then repeat Steps 5 through 7 until calibration is successful. If the display calibration continues to fail, consult your local reseller. 64 FM-1000 Integrated Display User Guide
