1
Download CNH FM-1000 Integrated Display
Transcript
The Tru Application Control Plugin 17 Configuring the channels Once you configure a material, you can configure the channels. The FM-1000 integrated display can control up to four channels of different materials at once. To configure a channel for liquid or granular fertilizer, see page 312 or page 331 respectively. 1. From the 4 Channel Setup screen, tap Channels: If you do not have population sensors to supply rate information (you only have block sensors), you can run the system in Monitor-only mode. For more information, see page 387. 2. From the list on the left, select a channel to configure. The materials that you set up are available in the Material list. 3. From the list, select one of the materials. Note – The material being controlled must reflect the sequence of what is connected to the 4 channel control harness. FM-1000 Integrated Display User Guide 303
