Download 526434
Transcript
1. Installation Fieldbus cable If the IP 65/IP 67 plugs from Festo are used, a cable outer diameter of 7-10 mm is permissible. The following cable is appropriate for use corresponding to the remote bus specifications: Cable selection Order no. Phoenix 3 x 2 x 0.22 mm2 IBS RBC METER-T (standard) 28 06 28 6 3 x 2 x 0.25 mm2 IBS RBC METER / F-T (highly flexible) 27 23 12 3 3 x 2 x 0.22 mm2 IBS RBC METER / E-T (can be laid underground) 27 23 14 9 Procurement source: Phoenix Contact GmbH & Co. Postfach 1341 D-32819 Blomberg, Germany www.phoenixcontact.com Bus length Specifications on the bus length can be found in the manuals for your interface module. Note If the valve terminal is mounted into a moving part of a machine, the fieldbus cable on the moving part must be provided with strain relief. Also observe the corresponding regulations in EN 60204 Part 1. 1.3.4 Fieldbus baud rate and fieldbus length The maximum permissible fieldbus length is dependent on the baud rate used. With a baud rate of 500 kBd, the maximum fieldbus length must not exceed 12.8 km (400 m per segment). Festo P.BE-CPX-FB6-EN en 1207c 1-21