Download 526434

1. Installation
System power supply, ad- Through the interlinking blocks with system, additional and
ditional power supply and valve power supply of type CPX-GE-EV-S..., CPX-GE-EV-Z... or
valve power supply
CPX-GE-EV-V..., the CPX terminal is supplied with operating
and load voltage.
Pin allocation of interlinking block with
Plug
1
2
4
M18
system power supply
type CPX-GE-EV-S...
additional power supply type CPX-GE-EVZ...
valve power supply
type CPX-GE-EV-V...
1: 24 VEL/SEN
2: 24 VVAL / 24 VOUT
3: 0 VEL/SEN /
0 VVAL / 0 VOUT
4: FE
1: Free (not connected)
2: 24 VOUT
3: 0 VOUT
4: FE
1: Free (not connected)
2: 24 VVAL
3: 0 VVAL
4: FE
A: 24 VEL/SEN
B: 24 VVAL/24 VOUT
C: FE
D: 0 VEL/SEN /
0 VVAL/0 VOUT
A: free (not connected)
B: 24 VOUT
C: FE
D: 0 VOUT
A: free (not connected)
B: 24 VVAL
C: FE
D: 0 VVAL
1: 0 VVAL / 0 VOUT
2: 0 VEL/SEN
3: FE
4: 24 VEL/SEN
5: 24 VVAL / 24 VOUT
1: 0 VOUT
2: Free (not connected)
3: FE
4: Free (not connected)
5: 24 VOUT
–
3
C
D
B
A
7/8”-4POL
2
1
3
4
7/8”-5PIN
5
VEL/SEN:
VOUT:
VVAL:
FE:
A, B, C, D:
Operating voltage electronics/sensors
Load voltage of outputs
Load voltage of the valves
Functional earth
Note:Coupling (plug socket NECU-G78G4-C2) is marked with “1, 2, 3, 4”. Allocation: D=1,
C=2, B=3, A=4. Other couplings can deviate from this.
Tab. 1/10:
Pin allocation for system power supply, additional power supply and valve
power supply
1-24
Festo P.BE-CPX-FB6-EN en 1207c