Download FINGERPRINT LOCK m- - ca

FN
IGERPRN
IT LOCK
PROFESSIOYAL \lANUFACTURrf<
ml'hnnlc you for usin&
I)igi rlertronic i
door Ir~clr!
Chapter one
$$\
Introduction
. . . .of
. . . .US
. . . . .Digi
. . . . . . .Fingerprint
. . . . . . . . . . . . . . . .Locks
.............................................
1.1 Prduct Characteristics
1.1.1 Produd Introduction
1.1.2 Introduction of Product Functions
1.2 Size and Weight
1.3 Technical Parameters
Chapter Two
,&
Operation
Instructions
...........................................................................................................
2.1 Unlocking Operation
2.2 Adding Password User
2.3 Deleting Password User
2.4 Modifying Password (Sub-coda, Master code)
2.5 Enabling IDisabling Passage Function
2.5.1 Enabling Passage Function
2.5.2 Disabling Passage Function
2.6 Adding I Deleting F~ngerprintUser
2.6.1 Adding Fingerprint Usor w ~ l hVsar Numbor
2.6.2 Adding Fingerprint Randomly
2.0.3Deleting Fingerpdnl User with Usor Number
2.6.4 Deleting All Fingetprint 'Usors
2.7 Precautions
Chapter Three
Installation of Fingerprint Lack,
r-s*
. . .
08
Chapter Four
Maintenance of Locks
Chapter Five
After-sales Services
Appendix 1 Accessorlog
Appendix 2 Packlng Llst
Appendix 3 Guide for Lolk/Rl(lht ::I1111 Illrl~rillon
Warranty Card
, ,
...........................................
$31
. . . . .
FINGERPRINT LOCK
PROFESSlONAL MANUFACTURER
Chapter One
Precautions
1 . Flngerprlnt locks are hi-tech products. The environment where the d m locks are used
is very important for thelr normal use. Dust and airmay contain highly cwrosive substances, so you are strongly recornmendsd to install d w r locks aRer the house fitrnents
and decorations are done This will help with normal use of your door locks and prolong
thelr service life,
S Digi Fingerprint
:ks
1.4 Product: Characterlstlcs
(Product Characteristics)
,:
2.Fingerprint locks are hl-tech products, and whether or not they are properly installed
diredly affects their normal operation and service life. You are recommendedto cbme
qualified persons to install your door locks, and carry out installation strictly acxwding
to Digi ~nstructionson installation.
1.I
.ll
one.
4) The user manual is sdapt6-d for fingerprint locks #8600-88,E600-92, 0600-97, 6m0-98
produced by us.
Product lntrodwctton
It is very easy to change batteries in the lock, just
need several minutes on one lack.
Can delele the users individually who were fired.
But there is no effecl for the other people to use.
1the lingerprint rs not Input correctly. The handle
handle; it can provide Ihe d m from opening 4- is
by form. and pmlong the usrng of the mechanism
of the lock.
Fingerprint user capacity is150 and password user
capacity IS 78
Especial1suitable for installationby nonpmlt?ssionnls
3. After installation and commissioning of door locks are dona, please initialtre the door
locks at the prime time, I.e., clear all fingerprints of the fingerprint locks, and recover
the Initial value of the modifled password, namely, the default one. Or,other people
may staal your fingerprint password.
4. Important Notes:
The initial master code 13"11111111",and please modify the master code when you use
it for the first time. " The password shall be eight-digit.
I)
This lock may store up to 78 passwords and 150 flngerprints:
2) When resetting operailon is done successfully, the lock may be set In the default
state, i.e., the m a s t ~code
r
is set as "11111111" and all sub-codes are cleared, Meanwhile, all user flngerprints shall be cleared,
3) User number may be any three-digit one, while user password may be any eight-dlgit
I.I .2 Introduction af Product Functions.
--
Adopt International advanced sensor tochnotoqy. ensuring the reliable quality.
Uslng 4'1.5 standard alkalne batterins.
Easy Inlallatlon. Directly EnstalF for knoh locks,
Pure stainless steel mechanical rotnlinq slructuro, nnable for using more than 10 years.
Free rotating handle 10 avoid violont d;~mnqnwhnn il keops working states.
Unlock ways: Fingerprint, bypad nnd Mnch:inisnl kny.
1.2 Size and Weight
1.2.1 S ~ z e
5. lnitfalizin~Operation of door locks
5.1) Recover the default state of the door l o c k (master coda Is set as 11111111, and all
sub+codesare cleared)
Remove the rear lock body with special tool, while keeping battery wlth the power,
and press " reset " button for several seconds on back Iron plate of front lock
body, Meanwhile, pull up slip cover in front lock body , wait far a lasting sound
' Dee " ,which means operation success.
5.2)Change tho dclault master ccde (111111111 Into the one you want, and please do
remember it.
fl
Front lock body
O 93
Front lock body
O 7:4
Motlso
6 3 Technical-parameters_)'
---.. .
C h a ~ t e Two
r
-+-
operation Instructions
:t for
uction
Functional Operation
2.9 Unlocking Operation
lT,,p~q
i!it-' ,-;*
,
1) Opening doorwith password: d~recflyinput the correct 8-digit password to open the door;
2) Opening dowwith lingerprint: put finger in the correct position when the blue background light ofthe fingerprint collection w~ndwvis on, to open the door ~fthe fingerpr~ntis
verified sucoessfully.
: storage
3 ) Mechaniwl Keys for emergency use
3c%
ateb surfacB , extreme
pawer con
-
2.2 Adding Password User
Press "1+"" + master code + 3d1gituser number + user password + user password +
"#" " For instance: to add user 111 and initial password 12312301.the folfowing operation shall be conducted:
vollag~
2.3 Deleting Password User
1)Deletlng with user numbor:
I-
- -
-
Prnss " P+"+master code +three-digit user
numbor+tRre~-digit
2)Deleting all sub-codes:
1
I
FINGERPRINT LOCK
PROFESSIONAL MANUFACTURER
2.4 Modifying Password (Sub-code, Master code)
2.6.4 Directly Delete Fingerprint With Fnger:
" 2+# " 'master d e + ' # ' +fingerprint
Press "O+*" + modified password +
!
<.
?
4:-
2.6.5 Deleting All Fingerprint Users
2.5 EnablinglDisabling Passage Function
Press ' 3+#+ma$ter code+#
"
2.5.1 Enabling1Passage Fundion
1;
.
Press -*+*+ master code + "W
<\
-
3
Note:
2.5.2 Disabling Passage Function
Press *+"" + master code + ' #
1)Rernove the front cover: When the blue background llght of the fingerprint mllsctlon
window is not on, Please repeat the operation ramove the front wvc!I.
7
2.6 Adding I Deletlng Fingerprint
member t h3~user number for futu~
2.6.1 Adding Fingerprint User wlth User Number
of thl
Press " II+# " +master code + " three-digit user
number " + " # " +fingerprint+ " Dee I' (to input
the next user number)
'Dae-" Is rne sound for pressing nurnmrs; "Dee-Dee-usefailure of operatron: "Dee4
; to low volta
"Dee"refers to crther succe
I
I
2.6.2 Adding Fingerprint Randomly
4 ) ~ e m o v ethe rear lock body wlth spoclnl 1001, whlln kcepin,g battery n11th the povver?
and press " reset " button for several socnridthor1 hnck Iron plate of front Ic~ c k
body, Meanwhile, pull up slip covnr In fronl lock body , iw i t for a Iasting sou MI
Press "I*#."+ master code + V"+ hgerprint +
"
"Dee' (to Input the next fingerprint)
!F
Press " 2+#" +master code+ " threedigit user
+ " threedigit user number " + '# "
-
-La-
~OTOLILUIIuIIL
2.6.3 Deleting Individual Fingerprintwith User Number
r'
Wee "' ,which means oporiltlon sllccn!;::.
n door when the blue h
state, remcwe tho fronl r:nvc!r, nnd o ~ r * thn
4Rn tinnfirr
IU=l prlnl collnctlon wintlrlw I!. rbrl.
A
'"
4
I
i
-
,
b
>
-
,
"'"""
FN
I CRPRN
I TLOCK
' * I
I
*-
<
,
$< , , ,
PROFESSIONALMANUFACTURER
- , -.,- ' - ' * - * ( . *
"*'..I
^
I
I*%*%d+*"
:'
A
x " , ' d a a r < *BI> - , * A * x <
~ r a a * r * ~ ~ ,,
+ ~ . - ~ ~ ~ *
-
' ~ * + * > * > ~ % < + < q < > < " > , ~ , A ,
"""'*'*".I
A-
,
,..".A
Chapter Four
Maintenance of Locks
,
.
. - A -
Cause 4 Fingerprint damaged,
valid fingerprint
Correctfwactlon
Put the fi nger on the wllectlon
Corrective actlon:
Put the finger on the collection window
agaln, to match the ragister8d fmgefprint
Routine maintenance
I.
The lock surface shall be protected agalnst any corrosive substance,or the protectbe
film on the surface may be damaged, and the luster may faint.
2. Handle is the cntical part of door lock, and its flexibility directly affects !he use of lock.
Thedore. do not hang any article on the handle.
3. In the event that the friction between the combined bolt and the box Is axcesslva, or me
b l t can't stretch out fully, if door shape is changed, the plate shall be adjusted.
4. The fingerprint c o l l e d h wimlaw may be wntarninatsd after use for long, and as a resuit,
Imay not be used normally. In this case, soft cloth may be used to clear It.
5. In the m t of warning of inslrfficient power of the batteries, they shall be changed Immediately to asssure m a 1 use of the dour lock.
6. Pay attention 20 anode and mthode of batteries.
7. Mechanical key shall be kept properly.
as rnuch as posslbie: or. use
password or mechanical key.
passwund or rnechaniwl key.
Cause 5 . Wet finger
Cauaa.6 Use tm much force hr
collection, to dirtoh the fingerprint
finger, a d put it again
on Ihe collection window
to open the d w r :
or use passwwd or
mechanical key.
Cauae7. Direct nunshine affactiag
fingerprint collection
Corrective action:
Use non-transparent
material (or hand) to
block the dlrect sunshine,
and open tha door
Phenomenon:
Whena fingerprint is put: on the collection window ofh e lock to open the door,
it can't open if the red light i s on and it sends out three s b r t k p s .
Cause 1. The fingerprint is invalid.
Corrective action:
CauseZ. The fingerprint may be cancelled.
Apply valid fingerpfint,
Corrective action:
Apply valid fingerprint,
w use password or
or use password or
rnechanlcalkey.
mechanical key.
/
CAUSE9. Dry hand
I
I
windm again, to M c h the
registered fingerprint positlon
posltlon as much as possible;or, us8
Corrective acfion
Use lissue to clean the
Elimination of frequent problems:
.
Cause3, Pornition deviation of the
Corfectlve actlon:
Molsten the hand,
and try It again
Corrective action
Put the f~ngerslightly on
the collection window to
open the door.
une8. Cold hand
rrective action:
~ ~ d rthe
r n hand, and
Iry it again
FINGERPRINT LOCK
PROFESSIONAL MANUFACTLRER
C h a ~ t e Five
r
~fter-;ales Services
5.1 Commitments
I.During one year as of the day when ~nstallationand receiving inspection are done, free
product services w~llbe provided (for both mschanlcal part and electronic part of the
door locks).During the two year, any qualityproblem of the electronic or mechanical part of
the door lock shall be oorrected with free of charge. However, damages to the locks due
to human factors are not in the scope of warranty, and charges will be collected for repair.
5,Product malfunctions caused by failure or instability of such amblent conditions as power,
voltage, air-conditioning or humidity (except for those In the scope of DigHproduct quality
criteria), as well as product problems caused by any event of force rnajeure (like earth
quake or Rre) and accidents.
5.3Report directions
2.Service life maintenance: After the one-year warranty period, charges will be collected
for services at the cost. The corporation will provide the service centers and users with
cheap quality spare parts.
5.3.1 In the event that your door lock fails, the operation sleps described in this instruction
book shall be followed. If the failure is stlll there, please contact our customer
service center, and provide the following information:
3.The headquarters and service centers will provide service criteria, technical support,
and training.
5.3.1 .I
Model of Digi lock
5.3.1.2Date of purchase, or date when installation and recelvlng Inspection are done
4.The customer service center will respond to the letters from users in 1-2 days, and respond to face-to-date complaints on the same day or on the next day.
5.2 Exemption of service obligations
5.3.7.3Your telephone number, fax numbe , and detalled address
5.3.1.40escription about product failure (may be rosolved more quickly if the description
is more detailed)
5.3.1.5Your advices
THAT THE DOOR LOCK I'AILC, WORKS
IMPROPEltLY C>lL IS llAMAGE1) DUE TO THE FOLLOW'ING REASONS. WE WON'T
PAMAGE THE 130C311 LOCK IN THE EVP,NT
1.Your door lock is out of the warranty period;
5.3.2The user Is expected to answer the q u ~ s t l o n
our
~ responsible servlce person asks
about field situations, fallure status, fraquancyllncldontal problems, operation and SO
forth, so that helshe can re-build the fsllh~rfl,flguro out the root cause, and provide
the user with a solution
2.You don't install or use the door lock, sohare or accessories according to the instructions;
3.Your door lock has been installed, repaired or removed by any person not authorized by Digi;
4.Problems including but not llmited to door crack, break, distortion due to moisture or ar
Id~ty,power supply problem, as well as problems caused by Improper storage, product
collision, failure to conduct necessary preventative maintenance, or application of spare
parts or modules not provided by Digi;
5.3.31f the problem stiH can't be rasolvnd, fiur w,rvlc:n
service center for field service,
13ncscln will mntact Digi's local customer
5.3.4When our technical person gnts to your ~)rntnl!anto provide fleld m l c e , please chedr
to see ~fhelshe Is authorlzatl by nbl.
i
......
FlNtERPRlNT LOCK
....
. . . .
.
PROFESSIONAL MANUFACTURER
5.3.5After the door lock is repaired, please check the result of repair. You may refuse to
sign Ihe Service Report if the PaiFurs is stifl there.
5.3.BWhen 1he door lock works properly, please sign the Sewlce Report to confirm to the
swim and give us your advices. Corporate user Is expected to seal the Report.
5.4Ways for users to complain
1. If you are not satlsfled with our products or services, for instance. you don't agree with
our product quallty, technology, or charge. you may report to our bcal custwnerservice
center, and they will handle it awrdirtg to your advices.
2. In the event that they can't resolve y w r problem w you are not satisfied with the res-
utts,you may immediately make a telephone f send a fax to the customer selvice canter in our headquarters, and we will give y w a reasonable answer,
I
Product model:
IPlant model:
IData of purchase:
ISite of purchase:
............................................................................................................................
............................................................................
........................................
IDate of InstallationIreceiving inspection:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ................................................
....
I
Purchaser:
I
Name:
.................................................................. ....................................................
IPast address:
....................................................
...................................................
IPostcode:
1 TeI.:
...............................................................
............................................................
THANIK YOU Fi
THE P'ROIYJC'I'
FXS Tl-lE 0LI.C)U
1. During one year as of the day when lnntnlln1lt)ririntl rric:nlvlng Inspectionare done, free
product services will be provided (for both mnchrir\lcnl pnrt nnd alectronlc part of the
dow locks). During the year, Any qu:illly ~~rohllwn
wHI bn corrected free of charge.
Howver, damages to the locks dun tn h111nri11
Inr:tori (Ilnpropor use, or damage), or
any event of force majeure aro not lrr thn :ic.ol)rt of wr~rr~bnly,
nnd charges wlll be collected for repair.
2. After the oneyear warranty pntlorl, c : l l ~ ~ ~wlll
r l ~l lirvr ~"rlll~~r.lrrd
Inr sawices at the cost.
3. Digi may provide you wlth emonlnrir:y r r 1 7 1 vlr-rv*~r ~ r l ~liolrl
r * u ~ v ! r x rriding
,
teltwsenhoe
items you request.
4. Please contact Oigl custonior snrvlrkrrIrrrrlirr III Ilnio If ilny failure is found during using
Digi won't be liable for any protdrnn If ytltr rll~~nnnflo
the d m lock on your own.