Download Table of Contents

Reference Guide
Table of Contents
This Reference Guide is your comprehensive information source for Genuine Accessories
for current and recent Hyundai models sold in Europe. It is divided into three chapters,
Accessory Guide, Model Guide and Wheel Guide though the Wheel Guide is created so it
can be also integrated to the Model Guide or as a separate publication.
For easy reference each vehicle model and accessory category has a designated colour,
which is shown in the table of contents and on the upper edge of every page. Within each
model or category the pages are numbered separately.
The Accessory Guide is designed to offer detailed information on the Genuine Accessory
range. It provides a product description, technical information, customer benefits, information on homologation and recommended combinations.
The Model Guide provides a complete overview of accessories by model. The Wheel Guide
includes complete information on steel and alloy wheels and can be either a standalone
chapter or attached to the corresponding vehicle model in the Model Guide.
The Reference Guide will be updated from time to time when the available product range
changes. The most up to date accessory information can always be found on the MOBIS
Marketing platform www.mobisparts.eu in the Accessory section.
Use of only Genuine Accessories or Standard Equipment Accessories will protect your
customers by ensuring that they benefit from quality assured products, fully supported by
Hyundai Motor Company.
Accessory Guide
Edited by:
MOBIS Parts Europe N.V.
Zweigniederlassung Deutschland
Wilhelm-Fay-Strasse 51
65936 Frankfurt am Main
Germany
Disclaimer:
All information, illustrations and specifications are correct at the time of printing and
are subject to change without notification. The models and specifications shown in
this document may vary from the models available in your market. Due to the limits of
the printing process, the car body colours shown may differ slightly from the actual
colours. Please contact your local MOBIS branch for the most recent information.
www.mobisparts.eu
3-108
Model Guide
109-174
Wheel Guide
175-216
© 2014 MOBIS Parts Europe N.V.
Version 2014 02 28
28 02 2014
Reference Guide - Table of Contents
Hyundai
Genuine Accessories
Accessory Guide
Accessory Guide
Table of Contents
Styling
1-22
Transport
1-23
Comfort
Protection
Edited by:
MOBIS Parts Europe N.V.
Zweigniederlassung Deutschland
Wilhelm-Fay-Strasse 51
65936 Frankfurt am Main
Germany
Disclaimer:
All information, illustrations and specifications are correct at the time of printing and
are subject to change without notification. The models and specifications shown in
this document may vary from the models available in your market. Due to the limits of
the printing process, the car body colours shown may differ slightly from the actual
colours. Please contact your local MOBIS branch for the most recent information.
www.mobisparts.eu
1-8
1-15
Safety
1-3
Care
1-3
Wheels
1
© 2014 MOBIS Parts Europe N.V.
Version 2014 02 28
28 02 2014 v 2
Accessory Guide - Table of Contents
Styling
Individual accents
Styling
Table of Contents
Styling
1-22
Body decals 1
Body decals, carbon optic 3
Door mirror caps 4
Front bumper trim line 5
Side trim lines 6
Tailgate trim line 7
Side bars 8
Side steps 9
Fender extension kit 11
Skid plate, front 12
Skid plate, rear 13
Front skirt 14
Rear skirt 15
Side skirts 16
Roof spoiler
17
Rear lights with LED inserts 18
LED lighting foot area 19
Entry guards 20
Illuminated entry guards 21
Transport
Comfort
Protection
1-23
1-8
1-15
Safety
1-3
Care
1-3
Wheels
28 02 2014 v 2
1
Accesspry Guide - Stling - Table of Contents
Styling
Body decals
With their high-gloss or matt, deep, rich colours, these precision-cut, high-quality vinyl
decals bring a dramatic upgrade to a car’s appearance. Tailor-made to fit p
­ erfectly, they
are coated with a UV protective layer and are resistant to the effects of weather, atmospheric pollution and repeated car-wash use. The adhesive decals are shaped and formed
to fit complex body contours.
Variety of available products:
Racing stripes
Art design
Specification & installation:
Cast vinyl
0.05 mm film thickness (without adhesive)
Surface finish: gloss and matt
Colour: black, white, silver, orange, red
Lay-flat kraft paper lining
Application temperature: +8°C minimum
(air and substrate, optimal ambient temperature)
Service temperature: -40°C to +95°C
Application method: dry & wet
Adhesive with air-release channels for bubble-free
installation
Tested against the effects of UV, extreme
temperatures and chemicals (fuel)
Orientation of applied film: within +/-10° of vertical
Installation time: 0.25-1.00 h
(model dependent, see fitting instruction)
Recommended combinations:
Door mirror decals
Entry guards
Front skirt
Rear skirt
Side skirts
Accessory Guide - Styling - 1
24 07 2014 v3
TABLE OF CONTENTS >
Styling
Customer benefits:
Creates a dramatic, eye-catching transformation of the
car’s appearance by adding distinctive coloured highlights.
A range of matt and gloss colours available.
In compliance with:
REACH (1907/2006/EC)
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Styling - 2
Styling
Body decals, carbon optic
With the realistic impression of 3D carbon fibre sheet, these precision-cut, high-quality
vinyl decals bring a dramatic upgrade to a car’s appearance. Tailor-made to fit perfectly,
they are coated with a UV protective layer and are resistant to the effects of weather,
atmospheric pollution and repeated car-wash use. The adhesive decals are shaped and
formed to fit complex body contours.
Specification & installation:
Automotive-grade premium cast vinyl
0.09 mm film thickness (without adhesive)
Colour: black, white, anthracite
Application temperature: +16°C to +32°C
(optimal +21°C to +23°C)
Temperature tolerance range after application:
-60°C to +107°C
Application method: dry
Pressure-activated adhesive, slideable with
air-release channels
Tested against the effects of UV, extreme
temperatures and chemicals (fuel)
Installation time: 0.25-1.00 h
(model dependent, see fitting instruction)
Recommended combinations:
Other carbon optic styling accessories
Customer benefits:
Creates a dramatic, eye-catching transformation of
the car’s appearance by adding the distinctive look of
carbon fibre.
In compliance with:
REACH (1907/2006/EC)
Accessory Guide - Styling - 3
24 07 2014 v3
TABLE OF CONTENTS >
Styling
Door mirror caps
These mirror caps fit exactly onto the door mirror housing and require absolutely
no drilling or cutting. These eye-catching, stylish dashes are weather-resistant and.
Variety of available products:
Door mirror caps for mirrors with turn indicator lights
Door mirror caps for mirrors without turn indicator lights
Depending on part number, different finishes are available
Specification & installation:
Stainless steel or automotive-grade plastic depending
on vehicle model
Impact-resistant for maximum durability and tensile
strength
No cutting or drilling required
Installed with 1K-PU adhesive or adhesive tape
Quick and easy to fit
Installation time: 0.35 h
Recommended combinations:
Other carbon optic or bright finish styling accessories
Customer benefits:
An easy way to personalise the exterior with highquality, elegant additions.
In compliance with:
ECE R26 (External projections)
ECE R48 (Direction indicator lamp)
REACH (1907/2006/EC)
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Styling - 4
Styling
Front bumper trim line
Perfectly shaped to exactly fit the car’s front bumper, the enduring bright trim line adds
a distinctive style enhancement, and has been designed to complement the exterior styling.
Easy to fit, the high-quality hardwearing material withstands the elements corrosion
resistant and will not chip or break under normal usage. It can be also used in connection
with front parking sensors.
Specification & installation:
High gloss stainless steel
Automotive grade double-sided tape
No drilling or cutting required
Installation time: 0.35 h
Recommended combinations:
Door mirror caps
Entry guards
Side trim lines
Tailgate trim line
Customer benefits:
An easy way to add that personal touch to the car’s
­appearance.
In compliance with:
ECE R26 (External projections)
REACH (1907/2006/EC)
Accessory Guide - Styling - 5
24 07 2014 v3
TABLE OF CONTENTS >
Styling
Side trim lines
Perfectly shaped to exactly fit the car’s side panels, the enduring bright trim line adds a
distinctive style enhancement and has been designed to complement the exterior styling.
Easy to fit, the high-quality and hard-wearing material withstands the elements, corrosion
resistant and will not chip or break under normal usage.
Specification & installation:
High gloss stainless steel
Automotive-grade, double-sided adhesive tape
Installation time: 0.35-0.50 h
(model dependent, see fitting instruction)
Recommended combinations:
Door mirror caps
Entry guards
Front bumper trim line
Tailgate trim line
Customer benefits:
An easy way to complement the car’s exterior design and
add that personal and distinctive touch to the exterior
appearance.
In compliance with:
REACH (1907/2006/EC)
ECE R26 (External projections)
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Styling - 6
Styling
Tailgate trim line
Perfectly shaped to exactly fit the tailgate lower edge, the enduring bright trim line adds
a distinctive style enhancement and has been designed to complement the exterior
styling. Easy to fit, the high-quality and hard-wearing material withstands the elements,
corrosion resistant and will not chip or break under normal usage.
Specification & installation:
High gloss stainless steel
Perfect fit
No drilling or cutting required
Automotive-grade, double-sided adhesive tape
Installation time: 0.35 h
Recommended combinations:
Door mirror caps
Entry guards
Front bumper trim line
Side trim lines
Customer benefits:
The car’s overall design is enhanced and emphasised
by this styling addition, which can be combined
­harmoniously with other additions.
In compliance with:
ECE R26 (External projections)
REACH (1907/2006/EC)
Accessory Guide - Styling - 7
24 07 2014 v3
TABLE OF CONTENTS >
Styling
Side bars
Sturdy protection for the lower side bodywork, that also gives the vehicle an additional
rugged appearance. The highly polished bars fit the body contours perfectly and are
specially shaped at each end.
Specification & installation:
High-gloss, polished stainless steel
No drilling required
Set of 2
Durable
Styling item, not load-bearing
Installation time: 1.00 h
Recommended combinations:
Mud guards
Customer benefits:
Combines extra rugged character with elegant style.
In compliance with:
Neutral Salt Spray (NSS) test
ECE R26 (External projections)
REACH (1907/2006/EC)
Certification:
ABE certificate
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Styling - 8
Styling
Side steps
Custom-manufactured for each model, the side steps are designed to complement the vehicle’s
overall styling. They are sturdily engineered and load-tested to provide improved access
to the cabin and roof-mounted equipment. Tread surfaces have integrated anti-slip rubber
inlays for use in all weather conditions.
Variety of available products:
Side steps, sporty
Side steps, rugged
Specification & installation:
High-grade, corrosion-resistant aluminium (rugged)
Injection-moulded, automotive-grade, plastic with
aluminium top surface (sporty)
Injection-moulded plastic end caps, UV-stable
and scratch-resistant (rugged)
Rubber inlays on step surfaces on some models
Powder-coated brackets
Maximum load: 150 kg-200 kg depending on model and
product for vehicles launched since 2010
Installation time: 1.00 h
Recommended combinations:
Mud guards (rear only)
Other styling accessories
Customer benefits:
Style combines with function to provide easy cabin
and roof access, while emphasising a true SUV look.
In compliance with:
ECE R26 (External projections)
Certification:
ABE certificate
Accessory Guide - Styling - 9
24 07 2014 v3
TABLE OF CONTENTS >
Styling
Side steps, rugged
Homologation & test certification
To increase and maintain product quality new tests are introduced with Hyundai Santa Fe DM.
Impact/Airbag compatibility test
ADR 72/00 Dynamic Side Impact Occupant
Protection
This test simulates the effects of a side impact on
mounted side steps. It must show that the side step
does not affect the stiffness of the side door structure, and will not have a negative influence on the
triggering of airbags.
Load test
Side steps must withstand the weight of a person,
lifting potentially heavy loads on to the roof carrier
system. This test is designed to ensure that, under
loads of 150 kg - 200 kg for 20 minutes per step, distortion of the aluminium step, steel mounting brackets
and plastic elements are within safe acceptable limits.
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Styling - 10
Styling
Fender extension kit
These stylish self-adhesive extensions add a rugged off road sporty appearance.
Specification & installation:
Automotive grade plastic
Fixation by automotive grade adhesive tape, durable
Dealer fit recommended
Installation time: 0.60 h
Warranty: 3 years
Recommended combinations:
Skid plates, front & rear
Side skirts
Side door mouldings
Customer benefits:
Stylish wheel arches, maintaining the
vehicle’s appearance and value.
In compliance with:
UN ECE R26 (External projections)
REACH (1907/2006/EC)
Certification:
TÜV certificate (GAS)
Care points:
Not compatible with smart park assist side sensors
and mud guards.
Accessory Guide - Styling - 11
24 07 2014 v3
TABLE OF CONTENTS >
Styling
Skid plate, front
Installing the front skid plate adds a more sporty and aggressive impression to the
front of the car. Strong and sturdy, the skid plate is precision made for a perfect fit
and complements the car’s overall styling with its rugged good looks.
Specification & installation:
Automotive-grade plastic
Durable
Coloured material
Drilling required
Installation time: 0.50 h
Recommended combinations:
Skid plate, rear
Fender extension kit
Side skirts
Customer benefits:
The car’s SUV design is enhanced and emphasised
by this styling addition, which can be combined
­harmoniously with other additions.
In compliance with:
EC 78/2009(Pedestrian protection)
ECE R26 (External projections)
Shatter Resistance (TÜV MB 744) (CH_AS_MB2006)
REACH (1907/2006/EC)
Certification:
ABE certificate
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Styling - 12
Styling
Skid plate, rear
Installing the rear skid plate adds a more sporty and aggressive impression to the
rear of the car. Strong and sturdy, the skid plate is precision made for a perfect fit
and complements the car’s overall styling with its rugged good looks.
Specification & installation:
Automotive-grade plastic
Durable
Coloured material
Use with tow bar (cutting may be required)
Provisions for genuine tow bars on some SUV models
Drilling required
Installation time: 0.50 h
Recommended combinations:
Skid plate, front
Fender extension kit
Side skirts
Customer benefits:
The car’s SUV design is enhanced and emphasised
by this styling addition, which can be combined
­harmoniously with other additions.
In compliance with:
ECE R26 (External projections)
Shatter Resistance (TÜV MB 744) (CH_AS_MB2006)
REACH (1907/2006/EC)
Certification:
ABE certificate
Accessory Guide - Styling - 13
24 07 2014 v3
TABLE OF CONTENTS >
Styling
Front skirt
The installation of a front skirt adds a more sporty and aggressive impression to the
front of the car. Strong and sturdy, the front skirt is precision made for a perfect fit
and complements the car’s overall styling.
Specification & installation:
Automotive-grade plastic
Silver, piano black or carbon optic depending
on part number
Durable
Installation materials included where required
Drilling required
Dealer fit recommended
Installation time: 0.50 h
Recommended combinations:
Fender extension kit
Rear skirt
Side skirts
Roof spoiler
Body decals
Side door mouldings
Customer benefits:
The car’s overall design is enhanced and emphasized by
this styling addition, which can be combined harmoniously
with other additions.
In compliance with:
UN ECE R128 (Pedestrian protection)
Shatter Resistance (TÜV MB 744) (CH_AS_MB2006)
ECE R26 ( External projections)
REACH (1907/2006/EC)
92/21*661/2009/EC
Material Marking (Reusability/recyclability/2005/64/
EC juncto 2000/53*2003/138/EC
Certification:
ABE certificate
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Styling - 14
Styling
Rear skirt
The installation of a rear skirt adds a more sporty and aggressive impression to the
rear of the car. Strong and sturdy, the rear skirt is precision made for a perfect fit and
­complements the car’s overall styling.
Specification & installation:
Automotive-grade plastic
Silver, piano black or carbon optic depending
Durable
Drilling is required
Installation materials included where required
Customer or dealer fit
Installation time: 0.50 h
Not recommended for use with horizontal tow bar
(cutting may be required)
Recommended combinations:
Body decals
Fender extension kit
Front skirt
Side skirts
Roof spoiler
Side door mouldings
Customer benefits:
The car’s overall design is enhanced and emphasized by
this styling addition, which can be combined harmoniously
with other additions.
In compliance with:
UN ECE R26 (External projection)
Shatter Resistance (TÜV MB 744) (CH_AS_MB2006)
Material Marking (Reusability/recyclability/recoverability 2005/64/EC juncto 2000/53*2003/138/EC
REACH (1907/2006/EC)
Certification:
ABE certificate
Accessory Guide - Styling - 15
24 07 2014 v3
TABLE OF CONTENTS >
Styling
Side skirts
Creating a more ‘ground-hugging’ character for the vehicle without lowering
the suspension.
Specification & installation:
Automotive-grade plastic
Coloured material
Installation with 1K-PU glue and/or automotivegrade, double-sided tape
Set of 2 or 4 depending on design
Installation time: 0.50 h
Recommended combinations:
Body decals
Fender extension kit
Front skirt
Rear skirt
Side door mouldings
Customer benefits:
The car’s overall design is enhanced and emphasised by
this styling addition, which can be combined ­harmoniously
with other additions.
In compliance with:
Shatter Resistance (TÜV MB 744) (CH_AS_MB2006)
REACH (1907/2006/EC)
ECE R26 (External projections)
Certification:
ABE certificate or TÜV report depending on model
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Styling - 16
Styling
Roof spoiler
Lightweight but strong and durable, the roof spoiler adds an extra sporty accent
to the tailgate styling.
Specification & installation:
Automotive-grade plastic
Durable
Installation time: 0.70 h
Recommended combinations:
Fender extension kit
Front skirt
Rear skirt
Side skirts
Customer benefits:
The car’s overall design is enhanced and
emphasised by this styling addition, which can
be combined harmoniously with other additions.
Certification:
ABE certificate
Accessory Guide - Styling - 17
24 07 2014 v3
TABLE OF CONTENTS >
Styling
Rear lights with LED inserts
Emphasize the dynamic style of the vehicle at night with these attractive LED rear lights
Specification & installation:
Increased vibration resistance
Longer service life
Faster rise time compared to standard rear lights
Energy efficient
Dealer fit recommended
Installation time 0.35h
Recommended combinations:
Other Styling Accessories
Customer benefits:
An easy way to add that personal touch to the
car’s appearance.
In compliance with:
included in WVTA
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Styling - 18
Styling
LED lighting foot area
Long-life, ambient blue LED lighting is installed as ‘Welcome’ illumination and switches
on/off with the opening/closing of the front doors.
Specification & installation:
Operating voltage: 9-15V DC installed to vehicle
courtesy lamp circuit
Power consumption: 0.7 W
Light source: LED class 1
Light colour: blue
Durability: circa 30,000 h
Installed under dashboard; lamp units concealed
Installation time:1,00 h
Recommended combinations:
Entry guards
Textile floor mats, velour
Customer benefits:
Soft, ambient LED footwell lighting that individualises
the vehicle.
Accessory Guide - Styling - 19
24 07 2014 v3
TABLE OF CONTENTS >
Styling
Entry guards
Creating a premium impression every time the door is opened, these high-quality stainless steel or aluminium entry guards fit perfectly in place and are embellished with the
car model logo.
Variety of available products:
Aluminium polished/brushed finish
Stainless steel polished/brushed finish
Specification & installation:
Aluminium or stainless steel
Self-adhesive or click fingers
Set of 2 or 4 pieces
Quick and easy to fit
Installation time: 0.35-0.45 h
(model dependent, see fitting instruction)
Recommended combinations:
Floor mats
LED lighting foot area
Door mirror caps
Side trim lines
Tailgate trim line
Front bumper trim line
Customer benefits:
These stylish entry guards add an individual touch
to the vehicle.
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Styling - 20
Styling
Entry guards, illuminated
Activated by the opening of the car door, these high-quality entry guards emit
a blue or white LED glow that spells out the model name. Creating a premium impression
every time the door is opened. The light is extinguished when the door is closed.
Specification & installation:
Aluminium or stainless steel
Cable connection to vehicle wiring system activated by
courtesy light switch
Set of 2 or 4 (the 2 front entry guards are illuminated)
Installation time: 0.70 h
Recommended combinations:
Door mirror caps
Side trim lines
Tailgate trim line
Floor mats
LED lighting foot area
Front bumper trim line
Customer benefits:
These stylish entry guards add a stylish premium touch
every time a door is opened.
Accessory Guide - Styling - 21
24 07 2014 v3
TABLE OF CONTENTS >
Transport
Tailored solutions
Transport
Table of Contents
Styling
1-22
Transport
1-23
Tow bar, horizontal detachable
1
Tow bar, vertical detachable
3
Tow bar, fixed
5
Tow bar wiring kit
7
Bike carrier for all tow bars
10
Euroclick G2 bike carrier
11
Cross bars, aluminium
12
Cross bars, steel
13
Roof rack, aluminium
14
Roof rack, steel
15
FreeRide bike carrier
17
ProRide bike carrier
18
Deluxe ski & snowboard carrier
19
Xtender ski & snowboard carrier
20
Cargo separator
21
Passenger seat storage net
22
Luggage net
23
Comfort
Protection
1-8
1-15
Safety
1-3
Care
1-3
Wheels
19 11 2013
1
Accessory Guide - Transport - Table of Contents
Transport
Tow bar, horizontal detachable
A thoroughly proven, steel tow bar system that is only partially visible when not in use.
It is a multipurpose system, exceptionally easy to use and trouble-free in operation.
This tow bar has a safe locking system which is locked by only pushing the ball down.
The removable tow ball can be stored in the provided protective bag when removed. The
installation has anti-theft protection and all components have comprehensive protection
against corrosion. The tow bar is developed based on all requirements for the specific
vehicle model. Compatible with Euroclick G2 bike carrier.
Specification & installation:
Original Equipment Supplier (OES) system highquality steel tow bar
Development and testing standard: CARLOS, TC
(CAR Loading Standard, Trailer Couplings) since 2010
(Please refer to detailed application table on
www.mobisparts.eu in the login area)
Horizontal detachable ball coupling
Rust-protection: E-coated / KTL to OEM standard
(480 hour salt spray resistance test) for models
since 2011 (Please refer to detailed application table on
www.mobisparts.eu in the login area)
Audible and visual indicators confirm safe connection of
removable ball
Maximum towing capacity limited only by vehicle
restrictions
D-value rating depends on model (actual value indicated
on the tow bar and tow bar user manual)
Manual retractable electrical socket bracket
Installation time : 0.50-1.50 h
(model dependent, see fitting instruction)
Lockable
Required additions:
Tow bar wiring kit
Recommended combinations:
Bike carrier for all tow bars (ball mounted)
Euroclick G2 bike carrier
Customer benefits:
Unobtrusive horizontal tow bar system that’s lockable,
easy to use and accessible.
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Transport - 1
Transport
In compliance with:
REACH (1907/2006/EC)
Certification:
Please refer to detailed application table
on www.mobisparts.eu in the login area.
Care points:
Avoid overloading by consulting vehicle & product
manuals.
Accessory Guide - Transport - 2
24 07 2014 v3
TABLE OF CONTENTS >
Transport
Tow bar, vertical detachable
A thoroughly proven, steel tow bar system that is not visible when the tow ball is detached. It is simple to use and trouble-free in operation. The removable tow ball can
be stored in the provided protective bag when removed. The installation has anti-theft
protection and all components have comprehensive protection against corrosion. The tow
bar is developed based on all requirements for the specific vehicle model.
Specification & installation:
Original Equipment Manufacturer (OEM) system
high-quality steel tow bar
Development and testing standard: CARLOS, TC
(CAR Loading Standard, Trailer Couplings) since 2008
(please refer to detailed application table on
www.mobisparts.eu in the login area)
Vertical detachable 3-ball locking system for easy and
secure bottom mounting
Corrosion-protection: E-coated / KTL to OEM standard
(480 hour salt spray resistance test) for models
since 2011(please refer to detailed application table on
www.mobisparts.eu in the login area)
Zinc-nickel tow ball coating for highest corrosion
resistance (720 hour salt spray resistance test)
Blanking plug supplied to protect socket when tow ball is
removed
Tow bar lock is protected by a dust cap; two keys supplied
Audible and visual indicators confirm safe connection
Maximum towing capacity limited only by vehicle
restrictions
D-value rating depends on model (actual value indicated
on the tow bar and tow bar user manual)
Manual retractable socket bracket, out of sight when
tow ball not in use
Installation time: 0.50-1.50 h
(model dependent, see fitting instruction)
Required additions:
Tow bar wiring kit
Recommended combinations:
Bike carrier for all tow bars (ball mounted)
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Transport - 3
Transport
Customer benefits:
Easy to use, lockable vertical tow bar system that’s
out of sight when not in use.
In compliance with:
REACH (1907/2006/EC)
Certification:
Please refer to detailed application table
on www.mobisparts.eu in the login area.
Care points:
Avoid overloading by consulting vehicle & product
manuals.
Socket can remain partially visible depending on
the vehicle model.
Accessory Guide - Transport - 4
24 07 2014 v3
TABLE OF CONTENTS >
Transport
Tow bar, fixed
A fixed, high-quality tow bar that’s ideal for frequent or permanent towing. The secure
mounting is ideally positioned. All components are climate- and age-resistant and have
automotive-grade protection against corrosion. The tow bar is developed based on all
requirements for the specific vehicle model.
Specification & installation:
Development and testing standard: CARLOS, TC (CAR
Loading Standard, Trailer Couplings) since 2010 (please
refer to detailed application table on www.mobisparts.eu
in the login area)
Fixed tow bar
High-quality steel
Rust-protection: E-coated / KTL to OEM standard
(480 hour salt spray resistance test) for models since
2008/2011(please refer to detailed application table on
www.mobisparts.eu in the login area)
Maximum towing capacity limited only by vehicle
restrictions
D-value rating depends on model (actual value indicated
on the tow bar and tow bar user manual)
Installation time: 0.50-1.50 h
(model dependent, see fitting instruction)
Required additions:
Tow bar wiring kit
Recommended combinations:
Bike carrier for all tow bars (ball mounted)
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Transport - 5
Transport
Customer benefits:
The perfect solution for frequent or permanent towing.
In compliance with:
REACH (1907/2006/EC)
Certification:
Please refer to detailed application table
on www.mobisparts.eu in the login area.
Care points:
Avoid overloading by consulting vehicle & product
manuals.
Accessory Guide - Transport - 6
24 07 2014 v3
TABLE OF CONTENTS >
Transport
Tow bar wiring kit
Essential to support the required vehicle lighting for caravan, trailer or bike rack, whether
conventional bulb or LED, and protecting the electrical systems of the vehicle. The multifunctional trailer module provides the necessary amplification for tail lights, brake lights and
turn indicators, as well as providing warning of malfunction of brake and indicator lights.
Modern vehicle electric systems are highly complex and sensitive to unauthorised modifications. These OE-quality electrical accessories are specifically designed for each unique
application in order to prevent damage or potential reliability issues with the vehicles electrical system. Available with either a 7-pole socket with drainage hole or 13-pole waterproof
socket housing.
Variety of available products:
7-pole
13-pole
+15 extension kit (only for 13-pole)
Specification & installation:
OE connectors for Plug & Play connection (connection
via RR combination lamps)
Amplifying all required vehicle signals through multifunctional trailer module (for models since 2010)
Compatible with LED lighting-equipped trailers +30 (PIN 9)
always included in Genuine Accessory 13-pole wiring kits
+15 (PIN 10) prepared (extension kit required) for
13-pole wiring kit
Fog lamp cut-off
Safety feature: audible warning of broken trailer turn
indicator lamps (legal requirement in Germany, Austria
and UK. Future standard for rest of Europe)
Safety feature: audible warning of failed trailer brake
lamps
Automatic park distance control (PDC) cut-off for MPE
PDC systems
Installation time: 0.50-1.50 h
(model dependent, see fitting instruction)
Required additions:
Tow bar
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Styling - 7
Transport
Recommended combinations:
Park distance control
Adaptor 7 - 13 for 7-pole
Adaptor 13 - 7 for 13-pole
Customer benefits:
High-quality, purpose-made electrical connection
system for use with all tow bars. Protecting the electrical
and electronic systems by amplifying all required vehicle
signals.
In compliance with:
REACH (1907/2006/EC)
Certification:
Please refer to detailed application table
on www.mobisparts.eu in the login area.
Accessory Guide - Transport - 8
24 07 2014 v3
TABLE OF CONTENTS >
Transport
Tow bars
Homologation & test certification
For detailed part number based information please refer to the detailed application
table on www.mobisparts.eu in the login area. You need to be logged in to have access
to this document.
Development & component testing standard
CARLOS TC (Car Loading Standard, Trailer Coupling)
The growing use of tow bars for other purposes (bike carriers, for instance), and larger and more specialised trailers
and caravans, has lead to the creation of the CARLOS TC testing procedure, in which the tow bar is subjected to
three-dimensional testing. This subjects the tow bar to stresses that realistically simulate all the uses to which a
tow bar may be put. Most aftermarket tow bars undergo a cheaper, less rigorous one-dimensional test, whereas all
Hyundai aftermarket tow bars are subjected to the CARLOS TC test as adopted by all European OE manufacturers.
The test simulates around 20,000 km usage to analyse the potential for weaknesses in the component and the vehicle.
Rust prevention (E-Coat)
SUV tow bar durability testing &
monitoring
ISO 9227NSS salt spray test
Electrophoretic deposition (EPD) uses an electric
current to provide vulnerable components with a
uniform protective coating. Most aftermarket towing
devices have less effective corrosion protection. The
ISO 9227NSS test involves 480 hours exposure to corrosive salt and is the standard test for towing devices
adopted by all European OE manufacturers.
< TABLE OF CONTENTS
Prelaunch tests
Hyundai Genuine Accessory towing devices are thoroughly tested and many are monitored in real-world
towing conditions on new Hyundai cars as part of the
new vehicle test programme, which lasts around nine
months. By the time the new vehicle is available for
public sale, the Genuine Accessory towing device has
also successfully completed all durability testing.
24 07 2014 v3
Accessory Guide - Styling - 9
Transport
Bike carrier for all tow bars
This compact and lightweight bike carrier mounts directly onto the tow bar. Its
robust aluminium and steel structure carries two bikes or one e-bike, and both
loading and unloading are simple and easy. Access to the vehicle tailgate is not
obstructed even when loaded.
Specification & installation:
Carrier frame in steel
Bike rails & profiles in aluminium
Dimensions: 1,000 x 200 x 590 mm
Dimension between axes not to exceed 1.24 m
For bikes with wheel base up to 1.89 m
For 2 bikes or 1 e-bike
Maximum load (kg): see vehicle owner’s manual
For frame diameters: 25-80 mm
Integrated lighting protection with 13-pin plug
connection
Anti-theft protection
EU-approved
Quick and easy to fit
Tilting feature to allow easy access to tailgate
Installation time: 0.10 h
Required additions:
Tow bar & Tow bar wiring kit
Customer benefits:
Easy to use, lightweight and lockable. Transports bikes
without blocking tailgate access.
Care points:
Avoid overloading by consulting vehicle & product
manuals.
Accessory Guide - Transport - 10
24 07 2014 v3
TABLE OF CONTENTS >
Transport
Euroclick G2 bike carrier
for horizontal detachable tow bars
Exceptionally easy to attach or remove, this sturdy but lightweight bike carrier consists of
two parts: the base frame and the bike holder. With new smart pump buckles and durable
straps for convenient wheel fastening. Even when loaded with two bikes, the smart pedal tilt
function allows easy access to the vehicle tailgate. This system is special because this solution can be attached directly in the receiver of the detachable tow ball. The advantage is
the ridge fixation to the car and optimal flow of forces during driving with loads. There’s an
extendable light bar for maximum flexibility and the whole carrier folds flat for easy storage.
Specification & installation:
Aluminium & other high-tensile lightweight materials
Dimensions: 1,020 x 30 x 55 mm
For 2 bikes (all sizes)
Maximum load (kg): 46 kg
For frame diameters: 22-80 mm
Integrated extendable lights with 13-pin plug
connection
Anti-theft lock
EU-approved
Quick and easy to fit
Tilting feature to allow easy access to tailgate
Installation time: 0.10 h
Required additions:
Tow bar, horizontal detachable (Genuine Accessory) &
tow bar wiring kit
Customer benefits:
Quick fit/quick release lightweight carrier for two bikes.
Smart tilt function for easy access to tailgate.
Care points:
Avoid overloading by consulting vehicle & product
manuals.
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Transport - 11
Transport
Cross bars, aluminium
Custom-made lightweight aluminium cross bars that provide a secure lockable basis for roof
carrier systems. Multiple accessories can be slid into place using the integrated T-tracks.
The high-strength moulded plastic mount is model-specific for a perfect fit. Only for vehicles with factory-installed roof rails.
Specification & installation:
Lightweight, high-strength aluminium bars
Solid steel clamp
Pre-assembled
Lockable
Aerodynamic cross section
With T-tracks
Maximum roof load (kg): see vehicle owner’s manual
Quick and easy to fit
Only for vehicles with factory-installed roof rails
Installation time: 0.20 h
Recommended combinations:
Bike carrier
Ski & snowboard carrier
Side steps for SUV to ease loading
Customer benefits:
Easy to fit and use roof mounting system that’s safe and
secure.
In compliance with:
UNECE R26 (External projections)
DIN 75302, ISO/PAS 11154:2006 (Minimum safety requirements for roof load carriers for passenger cars)
EC 1907/2006 (REACH, DOI, SVHC, Info-duty)
Marking of plastic parts on this product: P/N, Material,
Recycling Symbol: ><
EC 92/21 (Masses & dimensions)
Care points:
Avoid overloading by consulting vehicle & product
manuals.
Accessory Guide - Transport - 12
24 07 2014 v3
TABLE OF CONTENTS >
Transport
Cross bars, steel
Custom-made steel cross bars that provide a secure lockable basis for roof carrier systems.
The high-strength moulded plastic mount is model-specific for a perfect fit. Only for vehicles with factory-installed roof rails.
Specification & installation:
Steel bars
Solid steel clamp
Pre-assembled
Lockable
Maximum roof load (kg): see vehicle owner’s manual
Quick and easy to fit
Installation time: 0.20 h
Recommended combinations:
Bike carrier
Ski & snowboard carrier
Side steps for SUV to ease loading
Customer benefits:
Easy to fit and use roof mounting system that’s safe and
secure.
In compliance with:
UNECE R26 (External projections)
DIN 75302, ISO/PAS 11154:2006 (Minimum safety requirements for roof load carriers for passenger cars)
C 1907/2006 (REACH, DOI, SVHC, Info-duty)
Marking of plastic parts on this product: P/N, Material,
Recycling Symbol: ><
EC 92/21 (Masses & dimensions)
Care points:
Avoid overloading by consulting vehicle & product
manuals.
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Transport - 13
Transport
Roof rack, aluminium
Robust yet lightweight, vehicle-specific aluminium roof rack that provides a secure basis for
a range of roof carrier systems. The T-tracks in the bars enable other accessories to slide
securely into place, utilising the full length of the bars. The roof rack features an integral
locking system in the mounting. Vehicle-specific moulded plastic/rubber feet protect the
roof.
Specification & installation:
Lightweight aluminium bars
Solid steel clamp
Pre-assembled
Maximum roof load (kg): see vehicle owner’s manual
Maximum roof rack load: see vehicle-specific fitting
instruction
Aerodynamic cross section, with T-tracks
Lockable
Quick and easy to fit
Installation time: 0.20 h
Recommended combinations:
Bike carrier
Ski & snowboard carrier
Side steps for SUV to ease loading
Customer benefits:
Quick to fit, quick to remove, secure roof rack for extra
transport capability when there’s no room inside. Aerodynamic cross section to reduce wind noise and improve fuel
consumption.
In compliance with:
UNECE R26 (External projections)
EC 92/21 (Masses & dimensions)
DIN 75302, ISO/PAS 11154:2006 (Minimum safety
requirements for roof load carriers for passenger cars)
including TÜV-GS approval
EC 1907/2006 (REACH, DOI, SVHC, Info-duty)
Marking of plastic parts on this product: P/N, Material,
Recycling Symbol: ><
Care points:
Avoid overloading by consulting vehicle & product manuals
and/or dealer.
Accessory Guide - Transport - 14
24 07 2014 v3
TABLE OF CONTENTS >
Transport
Roof rack, steel
Robust, vehicle-specific steel roof rack that provides a secure basis for a range of roof
carrier systems. The roof rack can be locked in place. Specially moulded plastic/rubber feet
protect the roof.
Specification & installation:
Steel bars
Solid steel clamp
Pre-assembled
Maximum load (kg): see vehicle owner’s manual
Maximum roof rack load: see vehicle-specific fitting
instruction
Lockable
Quick and easy to fit
Installation time: 0.20 h
Recommended combinations:
Bike carrier
Ski & snowboard carrier
Side steps for SUV to ease loading
Customer benefits:
Quick to fit, quick to remove, secure roof rack for extra
transport capability when there’s no room inside.
In compliance with:
UNECE R26 (External projections)
EC 92/21 (Masses & dimensions)
DIN 75302, ISO/PAS 11154:2006 (Minimum safety
requirements for roof load carriers for passenger cars)
including TÜV-GS approval
EC 1907/2006 (REACH, DOI, SVHC, Info-duty)
Marking of plastic parts on this product: P/N, Material,
Recycling Symbol: ><
Care points:
Avoid overloading by consulting vehicle & product
manuals and/or dealer.
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Transport - 15
Transport
Roof racks and cross bars
Homologation & test certification
Minimum safety requirements
ISO PAS 11154:2006
All roof-mounted, load-bearing carrier systems must
conform to these industry requirements. They apply to:
mechanically attached, general use roof bars
suitable for load carrying
roof bar accessories and their attachments for
special purpose applications
mechanically attached specific purpose roof
devices suitable for carrying defined loads
magnetic fixing devices suitable for carrying a
defined load
Accessory Guide - Transport - 16
24 07 2014 v3
TABLE OF CONTENTS >
Transport
FreeRide bike carrier
Dynamically styled, roof-mounted single bike carrier with an attractive titanium-coloured
finish. The smart wheel holders and soft padded frame holder with quick-lock function
enables swift and secure mounting. The bike can be locked to the bike carrier, the bike
carrier to the load carrier. Pre-assembled, no tools required.
Specification & installation:
For 1 bike
Maximum load: 17 kg
Includes T-bolt adaptor for use with aluminium cross bars
For frame diameters: 25-70 mm (round), 65-80 mm (oval)
Fits tyre width sizes up to 2.3”
Product weight: 3.5 kg
Suitable for use with Genuine Accessory steel or
aluminium cross bars and steel or aluminium roof racks
Quick and easy to fit
Installation time: 0.25 h
Required additions:
Roof rack or cross bars
Recommended combinations:
Tow bar & tow bar wiring
Bike carrier for tow bar
Customer benefits:
Sleek styling, quick and easy operation, no tools
required. Lockable and folds flat for easy storage.
Care points:
Avoid overloading by consulting vehicle & product
manuals.
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Transport - 17
Transport
ProRide bike carrier
A premium roof-mounted single bike carrier for bikes up to 20 kg. There’s a unique
quick-mount system for fast attachment and a self-adjusting upright frame holder that
saves both time and effort. The bike is protected by the protective surface on the frame
holder and rubber protection on the adjustable straps that secure the wheels to the smart
wheel holders. All adjustments can be carried out comfortably at roof height. All types of
bikes can be transported, and the carrier can be mounted - without tools - on either side
of the vehicle, useful if more than one carrier is to be used. The bike locks to the carrier,
and the carrier to the roof rack, requiring just one key.
Specification & installation:
For 1 bike
Maximum load: 20 kg
For frame diameters: 22-70 mm (round),
80-100 mm (oval)
Fits wheel sizes up to 3”
Product weight: 4.4 kg
Suitable for use with Genuine Accessory steel
or aluminium cross bars and steel or aluminium
roof racks
Quick and easy to fit
Installation time: 0.25 h
Required additions:
R
oof rack or cross bars
Recommended combinations:
Tow bar & tow bar wiring kit
Bike carrier for all tow bars
Customer benefits:
Convenient, quick, tool-free mounting system with smart
wheel holders for easy loading and protective surfaces
that prevent damage to bikes. Lockable and suitable for all
types of bikes.
Care points:
Avoid overloading by consulting vehicle & product
manuals.
Accessory Guide - Transport - 18
24 07 2014 v3
TABLE OF CONTENTS >
Transport
Deluxe ski & snowboard carrier
Ski & snowboard carrier with extra large push buttons make it easy to release skis or snowboards while wearing gloves. The exclusive design, in aluminium, is designed to be aerodynamically efficient. Complete with lockable buttons.
Specification & installation:
For up to 4 carving skis or 6 pairs of cross-country
skis, depending on the width of the skis
For up to 2 snowboards
60 cm loading width
Lockable
Quick and easy to fit
Installation time: 0.25 h
Required additions:
Roof rack or cross bars
Customer benefits:
Safe, secure transport for skis & snowboards,
lockable, with quick and convenient, tool-free
mounting. Easy to store when not in use.
Care points:
Avoid overloading by consulting vehicle & product
manuals.
In case of bended cross bars/roof racks please use the
included spacer between the cross bars/roof racks and
the carrier.
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Transport - 19
Transport
Xtender ski & snowboard carrier
The carrier slides out sideways to aid loading and unloading. Extra large push buttons make
it easy to release skis or snowboards while wearing gloves. The carrier is high enough to
prevent high bindings from damaging the car roof. The exclusive design, in aluminium, is
designed to be aerodynamically efficient. Complete with locks.
Specification & installation:
For up to 4 carving skis or 6 pairs of cross-country skis,
depending on the width of the skis
For up to 2 snowboards
60 cm loading width
Lockable
Quick and easy to fit
Installation time: 0.25 h
Required additions:
Roof rack or cross bars
Customer benefits:
Slide-out system makes loading easy. Safe, secure
transport for skis & snowboards, lockable, with quick,
convenient, tool-free mounting. Easy to store when
not in use.
Care points:
Avoid overloading by consulting vehicle & product
manuals.
In case of bended cross bars/roof racks please use the
included spacer between the cross bars/roof racks and
the carrier.
Accessory Guide - Transport - 20
24 07 2014 v3
TABLE OF CONTENTS >
Transport
Cargo separator
A series of durable, custom-made grids that can be used individually or together to provide
secure separation of contents of the load area from the passenger cabin. The upper frame
fits between the rear seat backs and roof. Seat backs can still be folded to allow access
between load area and passenger cabin for most vehicles. The lower frame fits below the
upper frame to create a full height grid between load area and passenger cabin behind the
rear seats. The vertical split provides floor to roof longitudinal division of the load area.
None of the grids hinder the use of seat belts or restrict the driver’s view.
Specification & installation:
Nylon powder-coated steel for maximum durability
Rigid mesh panel welded to outer frame
Bespoke brackets for secure, precise fitting
Easy to remove
Not to be used with occupants on the 3rd row seats
Compatible with panoramic sun roof
May restrict use of retractable luggage cover
(model dependent, see fitting instructions)
Installation time: 0.2-0.35h (model dependent,
see fitting instruction)
Required additions:
For the lower frame, the upper frame is required
For the vertical split, the upper frame is required
Recommended combinations:
Trunk liner or trunk mat
Customer benefits:
Safe, secure, custom-made protection from the unrestrained movement of pets, packages and luggage in the
load area.
In compliance with:
UNECE R21 (Interior fittings: rounding off radii > 2.5 mm)
UNECE R118 (Flammability resistance - interior materials)
EC 1907/2006 (REACH, DOI, SVHC, Info-duty)
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Transport - 21
Transport
Passenger seat storage net
Drivers like to have some smaller items within reach throughout the journey. This convenient, seat-mounted net makes this possible without the danger of items falling off the
seat and rolling around the footwell. When seat to be used by passenger, the net has to be
removed. Easy to fit and remove.
Specification & installation:
Net: Polypropylene (PP)
Buckle: plastic
Elastic component
Maximum net load 50 N
Quick and easy to fit
Installation time: 0.10 h
Recommended combinations:
Luggage net
Take away hook
Customer benefits:
Easy and convenient access to items from the
driver’s seat, without cluttering the interior.
Care points:
To be removed when the seat is to be used by
a passenger
Accessory Guide - Transport - 22
24 07 2014 v3
TABLE OF CONTENTS >
Transport
Luggage net
For vehicles which have factory-installed location hooks in the load area. This
custom-made net prevents unwanted movement of luggage and other items
when on the move. Simple to fit and remove.
Specification & installation:
Textile and elastic mesh
Stretchable
Requires factory-installed location hooks
Quick and easy to fit
Installation time: 0.10 h
Recommended combinations:
Trunk liner or trunk mat
Luggage cover
Passenger seat storage net
Take away hook
Customer benefits:
This secure net holds luggage and other items
in place when on the move.
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Transport - 23
Comfort
Made-to-measure
Comfort
Table of Contents
Styling
1-22
Transport
1-23
Comfort
1-8
Rear seat entertainment cradle for iPad® 1
Armrest with storage box 2
Business suit hanger 3
Take away hook 4
Ice/sunscreen 5
Park distance control 6
Wind deflectors, front windows 8
Protection
1-15
Safety
1-3
Care
1-3
Wheels
19 11 2013
1
Accessory Guide - Comfort - Table of Contents
Comfort
Rear seat entertainment cradle for iPad®
For rear seat passengers who want to view their iPad®, this head restraint-mounted cradle
is the perfect solution. The clever design enables the viewer to tilt or rotate the iPad® to
provide the ideal viewing angle. All iPad® functions - movies, Internet surfing, music or
accessing apps - can be enjoyed in safety and comfort. The cradle meets occupant protection criteria.
Specification & installation:
iPad® can be rotated between landscape and portrait
Power supply from internal iPad® battery or vehicle
12V socket
Charging cable not included
33° tilt capability in each direction
Fits iPad® 1,2,3 & 4
iPad® installation and removal within seconds
iPad® is not included
Installation time: 0.05 h
Recommended combinations:
Armrest with storage box
Take away hook
Customer benefits:
Comfortable, safe and easy access to all iPad®
functions for rear seat passengers.
In compliance with:
UN ECE R21 (Head impact)
UN ECE 17/08 / FMSVSS 207 S4/S5 (Seat strength)
SAE J369/FMVSS302 (Flammability)
REACH (1907/2006/EC)
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Comfort - 1
Comfort
Armrest with storage box
Comfort and convenience combined. The adjustable armrest helps provide a comfortable
and ergonomic driving position for both, driver and front seat passenger. Depending
on vehicle model its top surface is finished in trim that matches the car interior. Under
the hinged armrest is a convenient storage compartment for small items. The combined
­armrest/storage box mounts directly onto the frame of the driver’s seat and can be
flipped upwards when not required.
Specification & installation:
Mounts directly on seat frame using existing holes
Fully foldable and adjustable (60°)
Height adjustment by wheel at base of armrest
Made of moulded ABS placstic with steel chassis
inside
Specific adapter for each car model
Installation time: 0.50 h
Recommended combinations:
Business suit hanger
Take away hook
Rear seat entertainment cradle for iPad®
Customer benefits:
Additional comfort and storage in one practical
accessory.
In compliance with:
UN ECE R21 (interior fittings)
REACH (1907/2006/EC)
Certification:
ABE certificate
Accessory Guide - Comfort - 2
24 07 2014 v3
TABLE OF CONTENTS >
Comfort
Business suit hanger
The convenient way to keep clothing tidy and crease-free during journeys. It fits easily
to the front head restraints and can be quickly detached from the supplied adapter for
use elsewhere, such as the office or hotel room. The retractable hook rotates for use in
wardrobes.
Specification & installation:
Chromium-plated surface and plastic covering
Resistant to light scratches
Mounts onto head restraint of driver/front
passenger seat
Must be removed when rear seat is occupied
Attached and removed in seconds
Maximum garment load: 3 kg
Easy to fit
Installation time: 0.10 h
Recommended combinations:
Armrest with storage box
Take away hook
Customer benefits:
Convenient way to keep clothes crease-free. Easy
­installation and removal makes it practical for use
in other locations too.
In compliance with:
REACH (1907/2006/EC)
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Comfort - 3
Comfort
Take away hook
Mounted on the lower passenger side of the centre console, the take away hook enables
the driver to fix and secure bags containing food & drink ‘to go’, to reduce the chance of
spillage while the vehicle is on the move.
Specification & installation:
Plastic
Resistant to light scratches
Drilling required
Installation time: 0.10 h
Recommended combinations:
Armrest with storage box
Business suit hanger
Luggage net
Passenger seat storage net
Rear seat entertainment cradle for iPad®
Customer benefits:
Convenient way to prevent spillage of food.
Accessory Guide - Comfort - 4
24 07 2014 v3
TABLE OF CONTENTS >
Comfort
Ice/sunscreen
When parked, the tear-resistant insulating material protects the interior from extreme
heat build-up during direct exposure to sunlight and prevents ice forming on the windscreen and front side windows in cold temperatures. The wrap-around flaps are held in
place by the closed front doors for effective theft resistance.
Specification & installation:
Tailor made
Coated polyethylene mesh
Artificial leather binding
Tear-resistant, UV-stable material
Reinforced on vehicle touch points
Foldable for convenient storage
Silver colour
Vehicle-specific tailoring to cover 100 % of the
vehicle windscreen and front side windows
Held in place by Velcro pads for the door mirrors
and flaps trapped by the front doors
Installation time: 0.05 h
Recommended combinations:
Trunk liner
Customer benefits:
Makes starting up in summer or winter much more
comfortable.
In compliance with:
REACH (1907/2006/EC)
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Comfort - 5
Comfort
Park distance control
Park distance control makes parking in restricted spaces easier than ever. Detects the
presence of obstacles and provides the driver with variable audible proximity warnings
during parking. The sensors, located in the bumper, can be painted to match the car
colour.
Variety of available products:
Park distance control, front
Park distance control, rear
Specification & installation:
Sensor position & system calibration are optimized
for each model
Precise recognition of obstacles within a wide
arc of ~120°
Ultrasonic sensors, only 22 mm in diameter
Sensor range front: ~30 cm to ~90 cm
Sensor range rear: ~30 cm to ~120 cm
Audible warning with volume control
Front sensors can be switched on/off
Rear sensors activated when reverse gear selected
Operation temperature range: -40°C to +85°C
Storage temperature range: -40°C to 125°C
Drilling to bumper required
Installation time: 0.75-2.00 h (model dependent,
see fitting instruction)
Customer benefits:
Parking becomes easier than ever and minimises risk
of parking damage.
Care points:
Optics may differ from factory installed sensors.
Accessory Guide - Comfort - 6
24 07 2014 v3
TABLE OF CONTENTS >
Comfort
In compliance with:
Tested for EMC compliance
UN ECE R127 (Pedestrian protection, front only)
UN ECE R26 (External projections)
UN ECE R21 (Interior fittings)
UN ECE R10 (Electromagnetic compatability)
REACH (1907/2006/EC)
ISO 17386 Manoeuvring aids for low speed
operation (MALSO)
Certification:
TÜV certificate (GAS)
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Comfort - 7
Comfort
Wind deflectors, front windows
The aerodynamically formed deflector reduces turbulence when driving with a partially
open front window, deflecting both airflow and raindrops. It also enables the venting of
hot air from the interior without unwanted turbulence. The lightly tinted deflector is
specifically designed to fit neatly within the door’s window channel, has no sharp edges
and is proof against extreme temperatures and the repeated use of car washes.
Specification & installation:
Lightly tinted PMMA acrylic
No sharp edges in case of breakage
Temperature stable
No influence on all functions of electric windows
or retractable door mirrors
Installation time: 0.20 h
Recommended combinations:
Mud guards
Customer benefits:
Provides the freedom to drive with slightly opened
front windows without unpleasant turbulence.
In compliance with:
Material marking (Reusability/recyclability/2005/64/
EC juncto 2000/53*2003/138/EC)
REACH (1907/2006/EC)
Certification:
ABE certificate
Accessory Guide - Comfort - 8
24 07 2014 v3
TABLE OF CONTENTS >
Protection
Preserving quality
Protection
Table of Contents
Styling
1-22
Transport
1-23
Comfort
1-8
Protection
1-15
Bumper corner protectors, front and rear
1
Rear bumper protector
2
Mud guard kit, protective
3
Mud guard kit, sporty
4
Side door mouldings
5
Locking wheel nuts & key
6
Protection foils
7
All weather mats (rubber mats)
8
Textile floor mats, standard
9
Textile floor mats, velour
10
Trunk liner
11
Trunk mat
12
Trunk mat, reversible anti-slip
13
Bumper flap for trunk mat
14
Luggage cover
15
Safety
1-3
Care
1-3
Wheels
19 11 2013
1
Accessory Guide - Protection - Table of Contents
Protection
Bumper corner protectors, front and rear
Good-looking and sturdy wrap-around protection for vulnerable corners of the bumper.
The flexible plastic strip helps to prevent light scratches and abrasion so that damage to
the car is minimised.
Specification & installation:
Automotive-grade plastic
Black
Fixation by automotive-grade adhesive tape
Durable
Set of 4: 2 front, 2 rear
Installation time: 0.25 h
Recommended combinations:
Rear bumper protector
Side door mouldings
Protection foils
Mud guards
Customer benefits:
Practical, good-looking protection for vulnerable areas.
In compliance with:
UN ECE R26 (External projections)
REACH (1907/2006/EC)
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Protection - 1
Protection
Rear bumper protector
Good-looking and durable protection for vulnerable top surface of the rear bumper.
The plastic or stainless steel rear bumper protector helps to protect against scratches
or damage when placing objects in the trunk or load space.
Specification & installation:
Stainless steel or automotive-grade plastic
Fixation by automotive-grade adhesive tape
Durable
Precise fit
Installation time: 0.20 h
Recommended combinations:
Bumper corner protectors
Side door mouldings
Protection foils (except rear bumper protection foil)
Mud guards
Customer benefits:
Practical, good-looking protection for vulnerable areas.
In compliance with:
UN ECE R26 (External projections)
REACH (1907/2006/EC)
Accessory Guide - Protection - 2
24 07 2014 v3
TABLE OF CONTENTS >
Protection
Mud guard kit, protective
Large mud guards provide protection against the effects of excessive dirt, slush or
mudspray for underbody, sills and doors. The matt black moulded guards require no
drilling or wheel/tire removal for installation.
Specification & installation:
Design follows body contour
Temperature-resistant
Screw and screw tap fastenings included
Installation time: 0.40 h
Recommended combinations:
Side door mouldings
Rear bumper protector
Bumper corner protectors
All weather mats
Trunk liner
Customer benefits:
Protection for vulnerable bodywork.
In compliance with:
REACH (1907/2006/EC)
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Protection - 3
Protection
Mud guard kit, sporty
Sportily styled mud guards help protect against the effects of excessive dirt, slush
or mudspray for underbody, sills and doors. The matt black moulded guards require no
drilling or wheel/tire removal for installation.
Specification & installation:
Ethylene-vinyl acetate (EVA)
Design follows body contour
Black
Temperature-resistant
Installation time: 0.40 h
Recommended combinations:
Rear bumper protector
Bumper corner protectors
Side door mouldings
All weather mats
Trunk liner
Customer benefits:
Stylish protection for vulnerable
bodywork.
Certification:
Included in WVTA
Accessory Guide - Protection - 4
24 07 2014 v3
TABLE OF CONTENTS >
Protection
Side door mouldings
Easy to fit protection against parking knocks and carelessly opened doors with these
attractive door mouldings. They have been designed specifically for each model and can
be painted to match the vehicle body colour. When installed, they help accentuate the
sporty elegance of the vehicle.
Specification & installation:
Automotive-grade plastic
UV-stable
Paintable
Installation with 1K-PU glue and/or automotive-grade,
double-sided tape
Durable
Installation time: 0.35-0.55 h (model dependent,
see fitting instruction)
Recommended combinations:
Mud guards
Rear bumper protector
Bumper corner protectors
Customer benefits:
Stylish protection that also adds an individual look.
In compliance with:
UN ECE R26 (External projections)
REACH (1907/2006/EC)
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Protection - 5
Protection
Locking wheel nuts & key
The most effective way to protect a set of alloy wheels from theft. One wheel nut per
wheel is replaced by a locking nut. Replacement keys are also available but can only be
ordered with the individual key code included in each set.
Specification & installation:
Triple nickel and clear chromate protective finish
Main material: steel
Corrosion resistance salt spray test
Short locking wheel nuts and long locking nuts
available (depending on wheel style)
Easy to fit (requires same torque as existing
wheel nut)
Installation time: 0.20 h
Recommended combinations:
Alloy wheels
Steel wheels
Customer benefits:
Peace of mind concerning the security of valuable wheels
when the car is unattended.
In compliance with:
Thatcham approved (UK insurance institute)
Accessory Guide - Protection - 6
24 07 2014 v3
TABLE OF CONTENTS >
Protection
Protection foils
Durable, self-adhesive protective films that protect and preserve paintwork from everyday wear and tear. Transparent films are available to protect the top surface of the rear
bumper, door handle recesses, entry guards and other vulnerable areas. Black foil is also
available for the rear bumper top surface. All are resistant against the effects of abrasion, climate conditions and extremes of temperature.
Variety of available products:
Rear bumper protection foil available in black and
transparent
Door handle recess protection foils, transparent
Protection foil set, transparent
Entry guard protection foil available in black and
transparent
Specification & installation:
Polyurethane (transparent), PVC (black)
Weather-resistant over 3 years
Durable, self-adhesive film
Application temperature: +13°C to +38°C
UV-resistant
Installation time: 0.25-0.65 h
Recommended combinations:
Protection foils can be combined
Customer benefits:
The foils help maintain vehicle value by preserving
a long-term, cared-for appearance.
In compliance with:
REACH (1907/2006/EC)
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Protection - 7
Protection
All weather mats (rubber mats)
Quality moulded, all weather mats are essential addition to protect the interior. We offer a
full range of all weather mats that use the original fixation points in the vehicle to ensure
safe and secure fit. Recommended for extreme weather conditions.
These extremely durable mats trap water, mud, sand and road salt and have a special
non-stick finish that makes them easy to clean. Front mats have a location hook provision. Specific designs are available for both right hand drive (RHD) and left hand drive
(LHD).
Specification & installation:
High-quality rubber/TPE
Black
Waterproof
Durable
Number of mats in set dependent on model
Front mats use standard anti-slip fastening hooks
Model-specific shape for optimum fit
Easy and quick to install
Recommended combinations:
Trunk liner
Mud guards
Customer benefits:
Easy to clean, long-lasting protection that keeps
the interior looking clean and new.
In compliance with:
SAE J369 (Flammability)
REACH (1907/2006/EC)
Accessory Guide - Protection - 8
24 07 2014 v3
TABLE OF CONTENTS >
Protection
Textile floor mats, standard
Using materials and colours that complement the vehicle interior, the mats are located on
the original fixation points to hold them securely in place. Driver side mats carry the vehicle
logo and the driver’s floor mat has an individual reinforced heel pad. They protect the
vehicle carpet from dirt and wear and are tailor-made to fit footwells exactly. Specific
designs are available for both right-hand drive (RHD) and left-hand drive (LHD).
Specification & installation:
Polypropylene textile
Grey colour with silver/grey logo
Number of mats in set dependent on model
Front mats use standard anti-slip fastening hooks
Tailor-made, model-specific shape for optimum fit
Quick and easy to install
Recommended combinations:
Trunk mat
Trunk liner
Entry guards
Customer benefits:
Good quality floor protection that keeps the interior
looking clean and new.
In compliance with:
REACH (1907/2006/EC)
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Protection - 9
Protection
Textile floor mats, velour
Using premium materials and colours that complement the vehicle interior, the mats are
located on the original fixation points to hold them securely in place. One or both front
mats carry the vehicle logo. They protect the vehicle carpet from dirt and wear and are
tailor-made to fit footwells exactly. Specific designs are available for both right-hand
drive (RHD) and left-hand drive (LHD).
Specification & installation:
Available in premium quality (600 g/m² or 830 g/m²)
and high quality (350 g/m²) depending on model
Polyamide velour
Uses standard anti-slip fastening hooks
Dark grey or black mat with silver/grey logo
Design mats with model-specific features available
depending on model
Set of 3, 4 or 5 mats depending on model
Quick and easy to install
Recommended combinations:
Trunk mat
Trunk liner
Entry guards
Customer benefits:
Luxurious, premium floor protection that keeps the interior
looking clean and new.
In compliance with:
REACH (1907/2006/EC)
Accessory Guide - Protection - 10
24 07 2014 v3
TABLE OF CONTENTS >
Protection
Trunk liner
This light, flexible and durable protection is designed to keep the trunk area looking new,
even after transporting gardening/building supplies or the family pet. The easy to clean,
waterproof liner has a textured anti-slip rubber surface to stop loads moving around, and
a raised border lip to contain spilled fluids. Access to load-retaining hooks is not
obstructed by the liner.
Specification & installation:
Made from ThermoPlastic Elastomer (PP) coated with
synthetic rubber (EPDM)
Thickness: 1.5 mm
Waterproof and durable
Edge height varies minimum 20 mm
depending on model
Black with vehicle logo
Not suitable for use when 3rd row seats are in use
Quick and easy to install
Moulded exactly to the vehicle design for optimum fit
Recommended combinations:
Rear bumper protector or bumper protection foil
Mud guards
All weather mats
Customer benefits:
Easy to clean, practical trunk protection that keeps
the interior trim looking clean and new.
In compliance with:
REACH (1907/2006/EC)
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Protection - 11
Protection
Trunk mat
The tailored, protective trunk mat is finished in high-quality soft velour to cushion more
sensitive cargo. The attractive trunk mat features the model logo. The mat provides protection against dirt, but does not obstruct access to the load-retaining hooks.
Specification & installation:
Polyamide material
Fastening hooks for safe transport of cargo are still
accessible
Dark grey or black colour mat with contrasting logo
Mats need not be removed when seats in third row
are in use (7 seat vehicle only)
Quick and easy to install
Recommended combinations:
Bumper flap
Floor mats
Rear bumper protection foil
Rear bumper protector
Customer benefits:
High-quality, attractive trunk protection that keeps the
interior trim looking clean and new. It combines perfectly
with the bumper flap available on some part numbers.
In compliance with:
REACH (1907/2006/EC)
Accessory Guide - Protection - 12
24 07 2014 v3
TABLE OF CONTENTS >
Protection
Trunk mat, reversible
The tailored, protective trunk mat is finished in high-quality soft velour on one side and easy
to clean, surface on the reverse. The velour side is perfect for cushioning more sensitive
cargo, while the reverse side is ideal for carrying messier loads. The velour side includes
the model logo and is resistant but does not obstruct access to the load-retaining hooks.
Specification & installation:
Premium quality (600 g/m²) velour
Polyamide velour
Dark grey or black colour mat with contrasting logo
Dual sided
Quick and easy to install, remove or reverse
Recommended combinations:
Floor mats
Rear bumper protection foil
Rear bumper protector
Customer benefits:
The reversible mat provides easy, versatile trunk
protection, whatever the load. It keeps the interior
trim looking clean and new.
In compliance with:
REACH (1907/2006/EC)
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Protection - 13
Protection
Bumper flap for trunk mat
The custom-made, fold-out bumper flap attaches securely to the underside of the trunk
mat and provides protection to the painted surfaces of the rear bumper while loading and
unloading. The durable flap is flexible, tear-resistant, water-resistant and easy to clean.
When not in use it folds away neatly, and it can be simply removed and reinstalled whenever required. Only suitable for use with trunk mats that feature location press studs.
Specification & installation:
Synthetic leather
Fastening buttons (3)
Detachable
Quick and easy to install
Required additions:
Trunk mat
Recommended combinations:
Floor mats
Customer benefits:
Easy to use, practical protection keeps the rear bumper
free from dirt and fluids when loading and unloading.
Helps to keep clothing clean when accessing the trunk.
In compliance with:
REACH (1907/2006/EC)
Accessory Guide - Protection - 14
24 07 2014 v3
TABLE OF CONTENTS >
Protection
Luggage cover
Roll-out cover conceals contents of the luggage compartment when the rear seats are
upright. It keeps the contents out of sight and protects them from direct sunlight.
Specification & installation:
Shaped to perfectly fit above the cargo following
the cargo design
Retractable, flexible material
Easy to fit (uses existing mounting points)
Customer fit
Installation time: 0.10 h
Warranty: 3 years
Recommended combinations:
Luggage net
Trunk mat
Customer benefits:
Peace of mind, knowing that luggage space contents
are protected from view, and from sunlight.
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Protection - 15
Safety
Always our priority
Safety
Table of Contents
Styling
1-22
Transport
1-23
Comfort
Protection
Safety
1-8
1-15
1-3
Safety bag 1
Safety vest 2
Warning triangle 3
Care
Wheels
19 11 2013
1-3
1
Accessory Guide - Safety - Table of Contents
Safety
Safety bag
A convenient and practical way to be prepared for the unexpected. High visibility safety
vest, warning triangle and bandages, all packed together in a purpose-made bag to be
stowed conveniently in the vehicle.
Specification:
Bandages
Warning triangle
High visibility reflective safety vest
Hyundai branded
No installation required
Customer benefits:
It pays to be prepared for the unexpected. On-board
safety equipment can save lives and provide an extra
level of reassurance.
In compliance with:
Safety vest is EN 471 approved
DIN 13164 compliant
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Safety - 1
Safety
Safety vest
Unplanned stops at the roadside for an emergency or to assist others, put car occupants
at danger, especially in hours of darkness. A high visibility vest reflects oncoming headlights, making the wearer immediately conspicuous to other road users. Some European
countries require that there must be a safety vest for each occupant, so it makes sense
to have extra vests on board.
Specification:
Bright neon vest with reflective strips
One size fits all
Yellow Velcro pack
Hyundai branded
No installation required
Recommended combinations:
Safety bag
Warning triangle
Customer benefits:
It pays to be prepared for the unexpected. On-board
safety equipment can save lives and provide an extra
level of reassurance.
In compliance with:
EN 471 approved
Accessory Guide - Safety - 2
24 07 2014 v3
TABLE OF CONTENTS >
Safety
Warning triangle
A legal requirement in most European countries, a correctly positioned warning triangle
gives other road users advance warning of a stationary vehicle obstructing all or part
of the carriageway. It is designed to remain stable and withstand strong winds and folds
together to be stowed conveniently in the luggage area.
Specification:
Foldable
Locking mechanism ensures stability
Resists winds up to 60 km/h
No installation required
Recommended combinations:
Safety vest
Safety bag
Customer benefits:
It pays to be prepared for the unexpected. On-board
safety equipment can save lives and provide an extra
level of reassurance.
In compliance with:
ECE R27 compliant
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide - Safety - 3
Care
Looking after quality
Care
Table of Contents
Styling
1-22
Transport
1-23
Comfort
Protection
1-8
1-15
Safety
1-3
Care
1-3
Summer car care kit 1
Winter car care kit 2
Ice scraper with glove 3
Wheels
1
19 11 2013
Accessory Guide - Care - Table of Contents
Care
Summer car care kit
This kit contains a useful selection of special products that helps keep Hyundai cars clean
and blemish-free throughout the summer. It is intended for sale during spring and summer or can be used as a promotional item.
Specification:
Hyundai Genuine Accessories quality products in branded
containers
One bottle of 40 ml summer screen wash concentrate
(diluted 100 times to make 4 l of normal diluted screen
wash). To be used during vehicle maintenance (dealer)
or by the customer when required.
The kit contains:
A 40 ml bottle of highly concentrated summer screen
wash that helps to keep the driver’s view of the road
crystal-clear and smear-free by removing oily deposits,
dead insects and other residues
An Insect remover spray to remove really stubborn
insect remains from the windscreen and headlights
A wheel rim cleaner spray that doubles up as a highquality degreaser and simplifies the removal of brake
dust and grime. Especially formulated for alloy wheels
A textured sponge to wipe away tough blemishes from
glass surfaces
The following items are also available
individually:
Summer screen wash (40 ml) 1:100 concentrate
(1box = 50pcs)
Wheel rim cleaner spray (500 ml) (1box = 10 pcs)
Insect remover spray (500 ml) (1box = 10 pcs)
Recommended combinations:
Ice/sunscreen
Genuine wiper blades
Customer benefits:
Easy to use, practical and effective car care products.
< TABLE OF CONTENTS
24 07 2014 v3
Accessory Guide -Care - 1
Care
Winter car care kit
This kit contains a useful selection of special products that removes the unwelcome effects
of harsh wintry weather conditions. It is intended for sale during autumn and winter or
can be used as a promotional item.
Specification:
Hyundai Genuine Accessories quality products
in branded containers
Products fulfil Nordic winter requirements
-60°C concentrate saves 50% storage space compared
with competitive products that offer only -20°C protection.
If the concentrated screen wash is diluted in a 1:2 ratio
(screen wash / water), it still is effective up to -11°C.
5 l ready-mixed solution for immediate use (no need
to add water)
250 ml and 500 ml screen wash concentrates can
be used during vehicle maintenance (dealer) or by
the customer when required
A 1l bottle of concentrated winter screen wash that helps
to ensure that wipers run smoothly over the windscreen
keeping it clear and free from road dirt, freezing rain and
snow. Easy to store in the vehicle trunk.
The kit contains:
A windscreen de-icer pump spray helps defrost
­windows and prevents them from re-icing
A basic ice scraper that speeds up the removal
of ice from windows
Absorbent synthetic chamois covered sponge to
wipe away condensation from interior windows
The following items are also available
individually:
Windscreen de-icer spray
(500 ml) - 1box = 12 pcs
Winter screen wash concentrate
(-60°C, 1 l) - 1 box = 12 pcs
Winter screen wash ready to use
(-30°C, 5 l) - 1 box = 3 pcs
Winter screen wash concentrate
(-60°C, 500 ml) - 1 box = 20 pcs
Winter screen wash concentrate
(-60°C, 250 ml) - 1 box = 24 pcs
Recommended combinations:
Ice scraper with glove
Ice/sunscreen
Customer benefits:
Easy to use, practical and effective car care products
that take the edge off driving in wintry weather.
Accessory Guide -Care - 2
24 07 2014 v3
TABLE OF CONTENTS >
Care
Ice scraper with glove
This integrated ice scraper and glove keeps the hand warm and dry while removing ice
from windows. A perfect gift to prospective new car buyers, customers buying a set of
new winter wheels or booking a winter check (customer retention).
Specification:
Strong polycarbonate-toothed scraper blade
Water-resistant glove with warm, comfortable
soft lining
Premium design with Hyundai branding
One size fits all
Recommended combinations:
Winter car care kit
Customer benefits:
Effective protection, keeping the hand warm and
dry while removing ice from the vehicle windows.
< TABLE OF CONTENTS
19 11 2013
Accessory Guide - Care - 3
Wheels
Tested to perfection
The Wheel information section of the Wheel Guide can be inserted here if desired.