Download BWAVZ BLU-100 Manual
Transcript
BRAINWAVZ Bluetooth User Manual 4.0&Earphones Warranty Card 1 2 3 1 White Indication Light 2 Button #2 “+” 3 Button #1 4 Button #3 “-” 4 Power ON/ OFF Pairing 1. To turn on your BLU-100 Headset Press & Hold “Button #1” for 3 sec. The White Indication Light of your headset will be flashing for 1 sec. and you will hear a voice say “Power ON”. Your BLU-100 Headset is now turned on. 2. To turn off your BLU-100 Headset Press & Hold “Button #1” for 2 sec. The White Indication Light of your headset will turn of f and you will hear a voice say “Power OFF”. Your BLU-100 Headset is now turned of f. Before using your BLU-100 headset for the first time, you need to pair it with your Bluetooth enabled phone. 1. Turn OFF your BLU-100. Press & Hold “Button #1” for ~5 sec. until the White Indication Light star ts flashing. You will hear a voice say “Pairing”. Your headset is now under pairing mode. 2. Activate your mobile phone’s Bluetooth mode to find your headset. 3. Your phone will detect “BLU-100”. By pressing “BLU-100” on your phone a voice will say “Connecting”. Your headset and mobile phone are now connected. If prompted for a password, please enter “0000”. IMPORTANT: If the pairing can’t be completed within 90 sec. while the pairing mode is activated, the pairing was unsuccessful. Please star t over and follow step 1 - 3 under “Pairing” again. Charging When you hear A voice say “Batter y Low”, please charge your headset with the provided Micro USB Charging Cable. 1. Open the USB Back Cover on the RIGHT Earphone Head of your BLU-100 Earphones and connect the Micro USB plug of your charging cable. 2. Connect the USB plug on other end of your charging cable to a computer or a USB power socket. When charging your headset, the White Indication Light on your remote control will turn on. Once your BLU-100 headset is fully charged, the White Indication Light will turn of f. Pairing with 2 Devices (Multipoint Connection) Your Brainwavz BLU-100 headset suppor ts a Multipoint Function to allow simultaneous pairing with two mobile phones. 1. Follow Step 1 to 3 under “Pairing” to pair your BLU-100 with your 1st mobile phone. 2. Turn OFF your BLU-100 headset. 3. Follow Step 1 to 3 under “Pairing” to pair your BLU-100 headset with your 2nd mobile phone. Volume Control To increase the volume press “Button #2”. To decrease volume press “Button #3”. Play & Pause To play your music press “Button #1” once. To pause your music press “Button #1” once again. Next Song Press & Hold “Button #2” for 3 sec. to fast for ward to the next song. Previous Song Press & Hold “Button #3” for 3 sec. to go back to the previous song. Voice Dialing Please ensure your mobile phone suppor ts voice dialing function and has the voice tag assigned for this feature. 1. Press & Hold “Button #2” or “Button #3” for 3 sec. to activate voice dialing. 2. Press & Hold “Button #2” or “Button #3” for 3 sec. again to deactivate voice dialing. Note: Depending on your mobile phone model, this operation may var y. Answering Phone Calls (Connected to 1 Phone) To answer a phone call press “Button #1” once. Answering Phone Calls (Connected to 2 Phones) 1. Press “Button #1” once to receive the second phone call and keep the first call connected on the first mobile phone when there is another call coming to the second mobile phone. 2. Press “Button #1” twice to transfer the two phone calls. Ending Phone Calls To end a phone call press “Button #1” once. Rejecting Incoming Phone Calls To reject a call press & hold “Button #1” for 2 sec. Last Number Redialing (Connected to 1 Phone) To redial the last dialed phone number press “Button #1” twice. Last Number Redialing (Connected to 2 Phones) To redial the last dialed phone number press “Button #1” twice. If the BLU-100 headset is connected to multiple phones, this feature will only work on the phone, which was paired with the BLU-100 first. Note: Depending on your mobile phone model, this operation may var y. iPhone Battery Indication The batter y level of the headset will be displayed on the upper right corner of an iPhone. Product Specifications Bluetooth Version 4.0 CSRBC8645 Chipset APT X Micro USB Charging Por t Suppor t HFP, HSP and A2DP Connectable to 2 Bluetooth devices at the same time Operating Range: Up to 30 feet (10 meters) 60mAh rechargeable Batter y Talk Time: 4 hours Music Play Time: 4 hours Standby Time: 100 hours Charging Time: ~2 hours iPhone Batter y Indication CVC Echo & Noise Cancellation Suppor ts Voice Prompting for MMI: Power on, Paring, Connecting, Batter y low & Power of f 12 Month Warranty Warning: You should not use any earphones and headphones at excessively loud levels. Sealed eartips and lower listening levels allow for longer periods of safe listening. Using earphones and headphones at high volumes or for extended periods of time (more than 1 hour period per day) can permanently damage your ears. Ringing in your ears or other discomfort can indicate that the music volume is too high. For safety reasons DO NOT use earphones and headphones while driving a car, biking, walking or operating machinery. Keep your earphones or headphones away from young children, this product includes small parts and cables which may create a choking hazard. Warranty: BRAINWAVZ warrants that this product shall be free from defects in material or workmanship for a period of 12 months from the date of purchase from an authorized BRAINWAVZ distributor or reseller. Except where prohibited by applicable law, this warranty is nontransferable and is limited to the original purchaser. This warranty gives you specific legal rights, and you may also have other rights that vary under local laws. ! Warranty Card (12 Month Warranty) Brainwavz Product: Vendor: Date of Purchase: RMA / Order Number: Your Name: Your Email Address: Your Mailing Address: In case of any problems, please contact us by email: [email protected] Description of Problem: To facilitate warranty, please contact the authorized vendor the product was purchased from.