Download User`s Manual

Transcript
Contents
About the J1 Connector ............................. 44
Output Terminal Insulation......................... 46
When the output terminal is not grounded
(floating) .............................................. 46
About the PMX Manuals ........................2
Safety Precautions .................................3
When the output terminal is grounded 47
Cautions when using the external voltage
(Vext)................................................... 48
Precautions Concerning Installation Location .........................................................3
Output Voltage Control .............................. 49
Control using an external voltage (Vext) ...
Product Overview ..................................3
Notations Used in This Guide ................3
49
Search by Topic......................................5
Control using an external resistance (Rext)
50
Component Names.................................6
1
Output Current Control............................... 51
Control using an external voltage (Vext) ...
Preparation
51
Control using an external resistance (Rext)
Connecting the Power Cord........................ 10
52
Turning the Power On................................. 11
Controlling the Output On and Off States .. 53
Turning the POWER switch on ............ 11
External Monitoring .................................... 55
Turning the POWER switch off ............ 12
Mounting the PMX Series to a Rack........... 12
Load Considerations................................... 13
Load Cables................................................ 16
Connecting to the Output Terminals ........... 17
Opera4 Parallel/Series
tion
Sensing....................................................... 18
Parallel Operation ...................................... 58
Local sensing ....................................... 18
Remote sensing
(equipped only on models whose rated
output voltage is 18 V or 35 V)............. 18
Parallel operation features .................. 58
Parallel operation connection.............. 59
Parallel operation settings................... 60
Starting parallel operation ................... 60
Series Operation ........................................ 61
2
Basic Functions
Series operation features .................... 61
Series operation connection................ 62
Measured Value Display and Setting Display..
Series operation settings..................... 63
22
Starting series operation ..................... 63
Panel Operations ........................................ 23
Output Operations ...................................... 23
CC Power Supply and CC Power Supply ... 24
Using the PMX Series as a CV or CC Power
Supply......................................................... 26
5
Calibration procedure.......................... 67
Alarm occurrence and clearing alarms 27
CONFIG Settings........................................ 31
CONFIG parameter details .................. 35
Preset Memory Function............................. 39
Saving settings to preset memory........ 39
Recalling preset memory entries ......... 40
Locking Panel Controls (Key lock).............. 41
Switching from Remote Mode to Local Mode ..
41
Factory Default Settings (Initialization) ....... 42
3
4
Calibration.................................................. 66
Calibration overview............................ 66
Protection Functions and Alarms................ 27
Protection function activation ............... 28
Maintenance
6
Specifications
PMX18-2A/ PMX18-5A/ PMX35-1A/
PMX35-3A........................................... 72
PMX70-1A/ PMX110-0.6A/ PMX2500.25A/ PMX350-0.2A/ PMX500-0.1A .. 78
Appendix
AOptions ........................................... 86
BTroubleshooting ........................... 88
External Control
General Description .................................... 44
PMX