Download LNC200 Series LIVE Ping Wireless Network Camera Manual
Transcript
iPhone® App 2. Tap Alarm notification. Enable/disable push notifications for video motion detection Select sensitivity for video motion push notifications Enable/disable push notifications for sound Select sensitivity for sound push notifications Enable/disable push notifications for PIR motion detection 3. Under Motion, select ON to enable Push Alarm Notifications when motion is detected using video motion detection or OFF to disable. 4. Under Motion Sensitivity, select the sensitivity for video motion detection push notifications between 1 (lowest) and 10 (highest) and press OK. 5. Under PIR, select ON to enable Push Alarm Notifications when motion is detected using the PIR motion sensor or OFF to disable. 6. Under Sound, select ON to enable Push Alarm Notifications when sound is detected by the camera or OFF to disable. Under Sound Sensitivity, select a sensitivity for Sound Push Alarm Notifications between 1 (lowest) and 10 (highest) and press OK. 7. Tap Update to save your settings. 5.4.4 CONFIGURING TEMPERATURE PUSH NOTIFICATIONS AND TEMPERATURE UNITS (FAHRENHEIT OR CELSIUS) Temperature Push Notifications can be set up to send you alerts if the temperature near the camera goes higher or lower than the specified values. You can also select the temperature unit that will be used by the system. Example of temperature push notification To configure temperature push notifications: 1. In Camera List, tap 88 next to the camera.