Download here - Bullet Security Cameras

Groups
150
Groups
The Groups Toolbar
The groups toolbar is useful to create groups so that operators can perform modifications on a group of
components or other system functions.
NOTE: Each system component has to be defined before it can be included in a group.
You can create:
Controller groups
Door groups
Relay groups
Input groups,
Access level groups
Floor groups
•
•
•
•
•
•
Controller Group Creation
The Controller group menu is used to group a number of controllers of the same site. The controller
group can later be used to perform s, for instance (i.e.: reload).
1
From the Groups window, select the Controller icon.
2
Select the View hierarchy button to display all the sites defined in the system.
3
From the Gateway/Site drop-down list, select the site or gateway from which you want to group
controllers.
4
To create a new group of controllers, click the New icon. To modify an existing group, select one from the
Controller group drop-down list, then enter the necessary information in the language section.
5
From the list of controllers connected to the selected site, check the controllers that are to be assigned
to the group.
NOTE: For more information on controllers, see "Controllers Configuration" on page 36
Door Group Creation
The Door group menu is used to group doors of a specific site. The door group can later be used to carry
out manual operations such as unlocking a group of doors.
1
From the Groups window, select the Door icon.
2
Select the View hierarchy button to display all the sites defined in the system.
3
From the Gateway/Site drop-down list, select the site or gateway from which you want to group doors.
4
From the Door Group drop-down list, select a door group you want to modify or click the New icon to
create a new group, then enter the necessary information.
5
From the Door list, select the doors that must be assigned to the group.
NOTE: For more information on doors, see "Doors Configuration" on page 59.