Download User`s Manual - US Technologies
Transcript
3Debugger General Information 3 Overview This chapter describes the basic features of the debugger used on the MVME162LX Embedded Controller. The firmware is known as the "MVME162Bug " or simply the "162Bug". It includes diagnostics for testing and configuring Industry Pack (IP) modules. Description of 162Bug The162Bug is a powerful evaluation and debugging tool for systems built around the MVME162LX CISC-based microcomputers. Facilities are available for loading and executing user programs under complete operator control for system evaluation. The 162Bug includes commands for display and modification of memory, breakpoint and tracing capabilities, a powerful assembler/disassembler useful for patching programs, and a power-up self test which verifies the integrity of the system. Various 162Bug routines that handle I/O, data conversion, and string functions are available to user programs through the TRAP #15 system calls. The 162Bug consists of three parts: 1. A command-driven user-interactive software debugger (referred to as the "debugger"). Its usage is described in Chapter 4. 2. A command-driven diagnostic package for the MVME162LX controller (referred to as the "diagnostics"). This is described in the MVME162Bug Diagnostics Manual. 3. A user interface which accepts commands from the system console terminal. When using the 162Bug, you can operate out of the debugger directory or the diagnostic directory. If you are operating in the debugger directory, the debugger prompt 162-Bug> is displayed and you have all of the debugger commands at your disposal. 3-1