Download User`s Manual - US Technologies
Transcript
Functional Description SRAM Batteries ! Caution Lithium batteries incorporate inflammable materials such as lithium and organic solvents. If lithium batteries are mistreated or handled incorrectly, they may burst open and ignite, possible resulting in injury and/or fire. When dealing with lithium batteries, carefully follow the precautions listed below in order to prevent accidents. ❏ Do not short circuit. ❏ Do not disassemble, deform, or apply excessive pressure. ❏ Do not heat or incinerate. ❏ Do not apply solder directly. ❏ Do not use different models, or new and old batteries together. ❏ Do not charge. ❏ Always check proper polarity. The power source for the onboard SRAM is a RAYOVAC FB1225 battery with two BR1225 type lithium cells. The battery is socketed for easy removal and replacement. The power source for the mezzanine SRAM is a Sanyo CR2430 battery. Small capacitors are provided so that the batteries can be quickly replaced without data loss. The lifetime of the batteries is very dependent on the ambient temperature of the board and the power-on duty cycle. The lithium batteries supplied on the controller and on the SRAM mezzanine module should provide at least two years of backup time with the board powered off and with an ambient temperature of 40 ° C. If the power-on duty cycle is 50% (the board is powered on half of the time), the battery lifetime is four years. At lower ambient temperatures, the backup time is significantly longer and may approach the shelf life of the battery. http://www.mcg.mot.com/literature 1-17 1