Download Micro Matic DEF Parts Catalog
Transcript
For Customer / End-User DEF Drum & IBC Closed Systems Container Valve Systems CLOSED, SEALED & SECURE 2 Order Toll-Free 1-866-755-4477 www.industrial.micromatic.com DEF Distribution CLOSED, SEALED & SECURE 3 Ways to Go, 3 Sizes & 1 Recommended Solution To determine which packaging choice best suits your operating requirements you need to answer three simple questions: 1. What is the size of the fleet to be serviced, and how many truck miles driven? 2. What size package will deliver the greatest level of operating effeciency? 3. What is the most cost-effective distribution option, i.e. ONE-WAY, RETURNABLE or ON-SITE REFILLING? Distribution Options RETURNABLE Fill – Transport – Dispense – Transport (Back) – Refill - Transport... One-Way Returnable On-Site Refilling ON-SITE REFILLING Fill - Transport - Dispense - On-site Refill Dispense - On-Site Refill... Ways to Go ONE-WAY Fill – Transport – Dispense – Disposal / Recycle. Container Size Options 55-GALLON DRUM supplies up to 11,000 miles*. Ideal for one or two trucks operations and can last several months. 55-Gal 275-Gal Drum 330-Gal IBC (Tote) 330-GALLON IBC supplies up to 66,000 miles*. IBC (Tote) is delivered by truck and requires unloading by forklift. Sizes 275-GALLON IBC supplies up to 55,000 miles*. IBC (Tote) is delivered by truck and requires unloading by forklift. NOTE: * Above calculations based at 3% usage at average fuel economy of 6 miles per gallon. Container volume/mileage usage may vary depending on vehicle dosage rate. CLOSED System options shown. In cold climates, containers should be stored indoors to prevent freezing. CLOSED SYSTEM Solutions Ensure ISO 22241 DEF Purity CLOSED, SEALED & SECURE 55-Gal 275 / 330-Gal Container Valve Systems The Micro Matic CLOSED, SEALED & SECURE Container Valve Systems help maintain DEF purity from manufacturer to the end-user. Provides for tamper evidency and includes DEF Warranty. Order Toll-Free 1-866-755-4477 www.industrial.micromatic.com 3 Container Valve Systems Options Single Trip / One Way Economical EPV Dispense Coupler – 316 Stainless Steel – Reusable – 3A Orange Key Reusable Closed, Sealed & Secure Container Valve – HDPE Plastic – 3A Orange Key • Economical & Low Cost • Proprietary DEF Keyed System • Tamper-Evident Down Tube – HDPE Plastic • No Leak Back Check Valve (Optional) – Drum: Straight With 30º Cut Bottom • DEF Compatible – IBC: Tube With Flexible Bellows • Compatible With 2.5" x 5 Buttress Thread 55 Gallon Drums and 275/330 Gallon IBC’s Economical & Low Cost – Closed, Sealed & Secure for DEF Market. Supply Chain Logistics Install 4 Transport Dispense Order Toll-Free 1-866-755-4477 www.industrial.micromatic.com Container Valve Systems Options Returnable / Reusable / Refillable On-Site Filling DV Closed, Sealed & Secure Fill Head Coupler – 316 Stainless Steel – 4 Pin Key – On-Site Filling Dispense Coupler – 304 Stainless Steel – 4 Pin Key On-Site Filling Container Valve – 304 Stainless Steel – 4 Cam Key • Robust & Durable • Proprietary DEF Keyed System • Tamper-Evident Down Tube – HDPE Plastic • No Leak Back Check Valve – Drum: Straight Tube With Flexible Bellows • DEF Compatible • Compatible With 55 Gallon Drums – IBC: Tube With Flexible Bellows and 275/330 Gallon IBC’s The Only On-Site Filling – Closed, Sealed & Secure System for DEF Market. Supply Chain Logistics Install Fill Transport Dispense Refill Order Toll-Free 1-866-755-4477 www.industrial.micromatic.com 5 DRUM - 55 Gallon EPV Container Valve System Standard Installation - Detailed Diagram Stainless Steel EPV Dispense Coupler Connects to the EPV Container Valve and pump hose. 1 Preferred Component. Robust construction designed for many years of service life. HDPE Plastic EPV Valve Dust Cover Fits into the EPV Container Valve to protect against debris. EPV Crimp On Tamper Evident Seal Tamper Evident seal secures the EPV Container Valve to Drum. This protects unauthorized removal of the EPV Container Valve from the Drum. 4 HDPE Plastic EPV Container Valve 5 HDPE Plastic EPV Down Tube with 30º Cut Designed for a single trip / one way system. Threads into 2.5" x 5 Buttress. 2 3 Down tube connects to EPV Container Valve body housing. 55 Gallon - DRUM 7 Crimp-On Tamper Evident Seal Installation Tool Used to install Crimp-On Tamper Evident Seal. Secures EPV Container Valve to Drum. Installer use only. 6 6 EPV Installation / Removal 3A Keyed Tool Connects to a standard 1/2” drive torque wrench to install the EPV Container Valve. Torque specification 12 - 15 ft./lb. Installer use only. Order Toll-Free 1-866-755-4477 www.industrial.micromatic.com DRUM - 55 Gallon EPV Container Valve System Standard Installation - Components 1 Single Trip / One Way Install - Transport - Dispense - Disposal / Recycle 1 2 Part Description Number DISPENSE - COUPLER EPV Dispense Coupler FDA (316 Stainless Steel) 1/2" NPT Male Thread Outlet 2.5" x 5 Buttress 3A / Orange EPDM 756-008B EPV Dispense Coupler FDA (316 Stainless Steel) 3/4" Barbed Outlet 2.5" x 5 Buttress 3A / Orange EPDM EPV 2" Crimp-On Tamper Evident Seal 2.5" x 5 Buttress Orange NA EPV Container Valve Dust Cover (Non-Tamper Evident) 2.5" x 5 Buttress Orange NA 2.5" x 5 Buttress 3A / Orange EPDM NA NA NA NA EPV Container Valve (HDPE Plastic) 3 WWX-160 DOWN TUBE EPV Down Tube (HDPE Plastic) For 55 Gallon Drum 30º Cut (805 mm length, 1/2" diameter) INSTALLATION / REMOVAL TOOL (Installer Use Only) 754-001 7 749-325 CONTAINER VALVE 102-136/805 6 2 DV DUST COVER 755-003 5 756-008B (Preferred Component) CRIMP-ON TAMPER EVIDENT SEAL (Installer Use Only) WWX-160 4 Seal Type 756-008 749-325 3 Reusable Thread / Key / Color EPV Container Valve Install / Removal Tool 4 CRIMP-ON TAMPER EVIDENT INSTALLATION TOOL (Installer Use Only) G-10 EPV Crimp-On Tamper Evident Installation Tool NA NA EPV User Manual NA NA 755-003 USER MANUAL 204-030-405 NOTE: All wetted metal components are HDPE Plastic & Stainless Steel. 7 G-10 ( Installer Use Only) Diameter: 1/2 in. 5 6 754-001 (Installer Use Only) 805 mm 204-030-405 102-136/805 (For 55 Gallon Drum) Order Toll-Free 1-866-755-4477 www.industrial.micromatic.com 7 DRUM - 55 Gallon DV Container Valve System Standard Installation - Detailed Diagram Stainless Steel DV Vapor Recovery Fill Head Coupler 5 1 Tamper Evident wire cable secures the DV Container Valve to Drum. This protects unauthorized removal of the DV Container Valve from the Drum. For filling in a closed system through the DV Container Valve System. For use at manufacturer and on-site filling in the field. Provides flow rate of 35 GPM. Stainless Steel DV Dispense Coupler Attaches to the pump connector hose. Self venting and prevents vacuum build-up in the container. For use with DV Container Valve. Plastic DV Tamper Evident Cap Tamper Evident cap for the stainless steel DV Container Valve. Stainless Steel Tamper-Evident Wire Brammal Seal 2 6 Stainless Steel DV Container Valve 7 HDPE Plastic DV Down Tube with Flex Bellows This is the DV Container Valve that threads into a drum. For use with DV Fill Head and DV Dispense Couplers. 3 For use after Drum is filled from DEF manufacturer thru transportation to end-user to ensure DV Container Valve has not been tampered. Plastic DV Dust Cover Simple dust cover for the Stainless Steel DV Container Valve (NON-Tamper Evident). For use when DV Dispense Coupler and Fill Head Coupler is disconnected from DV Container Valve. 4 Plastic Flex Tube Assembly for use with the DV Container Valve. 55 Gallon - DRUM 8 This tube is for use the 55 Gallon Drum for use through the bung opening. DV Container Valve Installation / Removal Tool Attaches to a standard 1/2" drive torque wrench to install the DV Container Valve and tube into a Drum. Torque specification 22 - 25 ft./lb. For use with DV Container Valve. Installer use only. 8 Order Toll-Free 1-866-755-4477 www.industrial.micromatic.com DRUM - 55 Gallon DV Container Valve System Standard Installation - Components 1 On-Site Filling Returnable / Reusable / Refillable Fill - Transport - Dispense - Returnable / Reusable (On-Site Filling) Part Number 1 744-026 2 3 4 5 6 7 Thread / Pin / Cam Seal Type DV Vapor Recovery Fill Head Coupler (35 GPM Flow Rate) 4 Pin Viton® DISPENSE - COUPLER 744-048 DV Dispense Coupler Horizontal 3/4" Barbed Outlet 4 Pin EPDM 744-050 DV Dispense Coupler Horizontal 3/4" BSPP Female Threaded Outlet 4 Pin EPDM 2.5" x 5 Buttress 4 Cam NA 2.5" x 5 Buttress and/or 2" BSP NA NA NA DV TAMPER EVIDENT CAP DV Container Valve 102-081 Tamper Evident Cap (Red) DV DUST COVER DV Container Valve 102-014 Dust Cover (Non-Tamper Evident) DV TAMPER EVIDENT WIRE DV Tamper Evident Wire Brammal Seal, CE-Z11-618 18" length x 1/16" diameter Stainless Steel CONTAINER VALVE 743-016 DV Container Valve 2" BSP / 4 Cam Viton® 743-096 DV Container Valve 2.5" x 5 / 4 Cam Viton® 743-097 DV Container Valve 2.5" x 5 / 4 Cam EPDM 744-026 NA NA 4 Cam NA NA NA 2 744-048 Horizontal 3/4" Barbed Outlet 3 4 102-081 102-014 5 CE-Z11-618 DOWN TUBE 743-203/810 8 Description FILL HEAD - COUPLER (Filler Use Only) DV Down Tube (HDPE Plastic) For 55 Gallon Drum (810 mm length, 1" diameter) 6 INSTALLATION / REMOVAL TOOL (Installer Use Only) 741-084 DV Container Valve Install / Removal Tool DV USER MANUAL 00274-I0808b DV Comprehensive Instruction Manual Diameter: 1 in. NOTE: All wetted metal components are stainless steel. 7 8 00274-I0808b 743-097 741-084 (Installer Use Only) 743-203/810 (For 55 Gallon Drum) 810 mm Order Toll-Free 1-866-755-4477 www.industrial.micromatic.com 9 IBC - 275 & 330 Gallon EPV Container Valve System Center Mounted - Detailed Diagram Stainless Steel EPV Dispense Coupler Connects to the EPV Container Valve and pump hose. 4 1 HDPE Plastic EPV Container Valve Designed for a single trip / one way system. Threads into 2.5" x 5 Buttress. Preferred Component. Robust construction designed for many years of service life. 5 HDPE Plastic EPV Valve Dust Cover Fits into the EPV Container Valve to protect against debris. EPV Crimp-On Tamper Evident Seal Tamper Evident seal secures the EPV Container Valve. This protects unauthorized removal of the EPV Container Valve from the IBC. 2 The standard IBC usually comes with a NPT bung in the center cap. Customers will want to convert these caps to the 2.5" x 5 buttress bung opening so they can use the EPV Container Valve System. Order this cap to ensure you have the correct 2.5" x 5 Buttress threaded opening. 3 6 8 Crimp-On Tamper Evident Seal Installation Tool Used to install Crimp-On Tamper Evident Seal. Secures EPV Container Valve to Drum. Installer use only. HDPE Plastic EPV Down Tube with Flex Bellows Tube for the EPV Container Valve and for applications where the valve is installed in the center cap of a 275 or 330 Gallon IBC, flexes to the side for optimum product extraction. 275 & 330 Gallon - IBC 10 Plastic 6” Center Mount Cap 7 EPV Installation / Removal 3A Keyed Tool Connects to a standard 1/2” drive torque wrench to install the EPV Container Valve. Torque specification 12 - 15 ft./lb. Installer use only. Order Toll-Free 1-866-755-4477 www.industrial.micromatic.com IBC - 275 & 330 Gallon EPV Container Valve System Center Mounted - Components 1 Single Trip / One Way Install - Transport - Dispense - Disposal / Recycle Reusable Part Number Description 1 2 756-008 EPV Dispense Coupler FDA (316 Stainless Steel) 1/2" NPT Male Thread Outlet 2.5" x 5 Buttress 3A / Orange EPDM 756-008B EPV Dispense Coupler FDA (316 Stainless Steel) 3/4" Barbed Outlet 2.5" x 5 Buttress 3A / Orange EPDM 2.5" x 5 Buttress 3A / Orange NA 2.5" x 5 Buttress 3A / Orange NA 2.5" x 5 Buttress 3A / Orange EPDM 2.5" x 5 Buttress EPDM 7 749-325 3 EPV Container Valve Dust Cover (Non-Tamper Evident) EPV Container Valve WWX-160 4 6" CENTER MOUNT CAP 6" Center Mount Cap 755-003 DOWN TUBE 755-641/1065 EPV Down Tube (HDPE Plastic) For 275 Gallon IBC Flex Bellows (1065 mm length, 1/2" diameter) NA NA 755-641/1245 EPV Down Tube (HDPE Plastic) For 330 Gallon IBC Flex Bellows (1245 mm length, 1/2" diameter) NA NA 3A / Orange NA 5 INSTALLATION / REMOVAL TOOL (Installer Use Only) 754-001 8 EPV 2" Crimp-On Tamper Evident Seal CONTAINER VALVE 301-807 6 2 DV DUST COVER 755-003 5 756-008B (Preferred Component) CRIMP-ON TAMPER EVIDENT SEAL (Installer Use Only) WWX-160 4 Seal Type DISPENSE - COUPLER 749-325 3 Thread / Key / Color EPV Container Valve Install / Removal Tool CRIMP-ON TAMPER EVIDENT INSTALLATION TOOL (Installer Use Only) G-10 301-807 EPV Crimp-On Tamper Evident Installation Tool NA EPV User Manual NA NA Diameter: 1/2 in. USER MANUAL 204-030-405 NA NOTE: All wetted metal components are HDPE Plastic & Stainless Steel. 8 6 7 1065mm G-10 (Installer Use Only) 204-030-405 754-001 (Installer Use Only) 755-641/1065 (For 275 Gallon IBC) Order Toll-Free 1-866-755-4477 www.industrial.micromatic.com 11 IBC - 275 & 330 Gallon DV Container Valve System Center Mounted - Detailed Diagram Stainless Steel DV Vapor Recovery Fill Head Coupler 5 1 Tamper Evident wire cable secures the DV Container Valve to IBC. This protects unauthorized removal of the DV Container Valve from the IBC. For filling in a closed system through the DV Container Valve System. For use at manufacturer and on-site filling in the field. Provides flow rate of 35 GPM. Stainless Steel DV Dispense Coupler Attaches to the hose to pump the DEF from the container. This is a self venting Coupler and allows atmospheric air into the container. For use with DV Container Valve. Plastic DV Tamper Evident Cap Tamper Evident cap for the stainless steel DV Container Valve. Stainless Steel Tamper-Evident Wire Brammal Seal 2 6 Stainless Steel DV Container Valve 7 Plastic 6” Center Mount Cap 3 Simple dust cover for the Stainless Steel DV Container Valve (NON-Tamper Evident). For use when DV Dispense and Fill Head Coupler is disconnected from DV Container Valve. The standard IBC usually comes with a NPT bung in the center cap. Customers will want to convert these caps to the 2.5" x 5 buttress bung opening so they can use the tamper evident features of the DV Container Valve System. Order this cap to ensure you have the correct 2.5" x 5 Buttress threaded opening. For use after IBC is filled from DEF manufacturer thru transportation to end-user to ensure DV Container Valve has not been tampered. Plastic DV Dust Cover Threads into an IBC. This is the DV Container Valve only, no plastic tube is attached. For use with DV Fill Head and DV Dispense Couplers. 4 8 Plastic Flex Tube Assembly for use with the DV Container Valve. 275 & 330 Gallon - IBC 9 HDPE Plastic DV Down Tube with Flex Bellows This tube is cut for a 275 or 330 Gallon IBC for use through the center cap and flexes to the side for optimum product extraction. DV Container Valve Installation / Removal Tool Attaches to a standard torque wrench to install the Drum Valve and tube into an IBC. Torques to 22 - 25 ft./lb. For use with DV Container Valve. Installer use only. 12 Order Toll-Free 1-866-755-4477 www.industrial.micromatic.com IBC - 275 & 330 Gallon DV Container Valve System Center Mounted - Components 1 Returnable / Reusable / Refillable Fill - Transport - Dispense - Returnable / Reusable (On-Site Filling) Part Number Description 1 FILL HEAD - COUPLER (Filler Use Only) 744-026 2 3 7 4 Pin EPDM 744-050 DV Dispense Coupler Horizontal 3/4" BSPP Female Threaded Outlet 4 Pin EPDM DV TAMPER EVIDENT CAP 9 DV Container Valve Tamper Evident Cap (Red) 2.5" x 5 Buttress 4 Cam NA 2.5" x 5 Buttress and/or 2" BSP NA NA NA DV DUST COVER DV Container Valve Dust Cover (Non-Tamper Evident) DV TAMPER EVIDENT WIRE DV Tamper Evident Wire Brammal Seal, 18" length x 1/16" diameter Stainless Steel CONTAINER VALVE 743-016 DV Container Valve 2" BSP / 4 Cam Viton® 743-096 DV Container Valve 2.5" x 5 / 4 Cam Viton® 743-097 DV Container Valve 2.5" x 5 / 4 Cam EPDM 2.5" x 5 Buttress EPDM 6" CENTER MOUNT CAP 301-807 8 Viton® DV Dispense Coupler Horizontal 3/4" Barbed Outlet CE-Z11-618 6 4 Pin 744-048 102-014 5 Seal Type DISPENSE - COUPLER 102-081 4 DV Vapor Recovery Fill Head Coupler (35 GPM Flow Rate) Thread / Pin / Cam 6" Center Mount Cap DOWN TUBE 743-236/1065 DV Down Tube (HDPE Plastic) For 275 Gallon IBC Flex Bellows (1065 mm length, 1 in. diameter) NA NA 743-236/1245 DV Down Tube (HDPE Plastic) For 330 Gallon IBC Flex Bellows (1245 mm length, 1" diameter) NA NA 4 Cam NA NA NA 744-026 On-Site Filling 2 744-048 Horizontal 3/4" Barbed Outlet 3 4 102-081 102-014 5 6 CE-Z11-618 743-097 301-807 7 Diameter: 1 in. INSTALLATION / REMOVAL TOOL (Installer Use Only) 741-084 DV Container Valve Install / Removal Tool DV USER MANUAL 00274-I0808b DV Comprehensive Instruction Manual 8 NOTE: All wetted metal components are stainless steel. 743-236/1065 (For 275 Gallon IBC) 9 00274-I0808b 1065mm 741-084 (Installer Use Only) Order Toll-Free 1-866-755-4477 www.industrial.micromatic.com 13 IBC - 275 & 330 Gallon EPV Container Valve System Top Side Mounted - Detailed Diagram Stainless Steel EPV Dispense Coupler Connects to the EPV Container Valve and pump hose. 1 Preferred Component. Robust construction designed for many years of service life. HDPE Plastic EPV Valve Dust Cover Fits into the EPV Container Valve to protect against debris. EPV Crimp-On Tamper Evident Seal Tamper Evident seal secures the EPV Container Valve. This protects unauthorized removal of the EPV Container Valve from the IBC. 4 HDPE Plastic EPV Container Valve 5 HDPE Plastic EPV Down Tube with 30º Cut 2 3 Tube for the EPV Container Valve and for applications where the valve is installed in the top side bung of a 275 & 330 Gallon IBC. 275 & 330 Gallon - IBC 7 Crimp-On Tamper Evident Seal Installation Tool Used to install Crimp-On Tamper Evident Seal. Secures EPV Container Valve to Drum. Installer use only. 14 Designed for a single trip / one way system. Threads into 2.5" x 5 Buttress. 6 EPV Installation / Removal 3A Keyed Tool Connects to a standard 1/2" drive torque wrench to install the EPV Container Valve. Torque specification 12 - 15 ft./lb. Installer use only. Order Toll-Free 1-866-755-4477 www.industrial.micromatic.com IBC - 275 & 330 Gallon EPV Container Valve System Top Side Mounted - Components 1 Single Trip / One Way Install - Transport - Dispense - Disposal / Recycle Part Number 1 2 6 2.5" x 5 Buttress 3A / Orange EPDM 756-008B EPV Dispense Coupler FDA (316 Stainless Steel) 3/4" Barbed Outlet 2.5" x 5 Buttress 3A / Orange EPDM 756-008B (Preferred Component) 2 CRIMP-ON TAMPER EVIDENT SEAL (Installer Use Only) 749-325 EPV 2 in. Crimp-On Tamper Evident Seal 2.5" x 5 Buttress Orange NA EPV Container Valve Dust Cover (Non-Tamper Evident) 2.5" x 5 Buttress 3A / Orange NA 2.5" x 5 Buttress 3A / Orange EPDM DV DUST COVER CONTAINER VALVE EPV Container Valve (HDPE Plastic) 3 WWX-160 DOWN TUBE 102-136/975 EPV Down Tube (HDPE Plastic) For 275 Gallon IBC 30º Cut (975 mm length, 1/2 in. diameter) NA NA TBD EPV Down Tube (HDPE Plastic) For 330 Gallon IBC 30º Cut (TBD mm length, 1/2 in. diameter) NA NA 3A / Orange NA 4 INSTALLATION / REMOVAL TOOL (Installer Use Only) 754-001 7 Seal Type EPV Dispense Coupler FDA (316 Stainless Steel) 1/2" NPT Male Thread Outlet 755-003 5 Thread / Key / Color 756-008 WWX-160 4 Description DISPENSE - COUPLER 749-325 3 Reusable EPV Container Valve Install / Removal Tool 755-003 CRIMP-ON TAMPER EVIDENT INSTALLATION TOOL (Installer Use Only) G-10 EPV Crimp-On Tamper Evident Installation Tool NA EPV User Manual NA NA Diameter: 1/2 in. USER MANUAL 204-030-405 NA NOTE: All wetted metal components are stainless steel. 7 G-10 (Installer Use Only) 204-030-405 6 5 975 mm 754-001 (Installer Use Only) 102-136/975 (For 275 Gallon IBC) Order Toll-Free 1-866-755-4477 www.industrial.micromatic.com 15 IBC - 275 & 330 Gallon DV Container Valve System Top Side Mounted - Detailed Diagram Stainless Steel DV Vapor Recovery Fill Head Coupler 5 1 Tamper Evident wire cable secures the DV Container Valve to IBC. This protects unauthorized removal of the DV Container Valve from the IBC. For filling in a closed system through the DV Container Valve System. For use at manufacturer and on-site filling in the field. Provides flow rate of 35 GPM. Stainless Steel DV Dispense Coupler Attaches to the hose to pump the DEF from the container. This is a self venting Coupler and allows atmospheric air into the container. For use with DV Container Valve. Plastic DV Tamper Evident Cap Tamper Evident cap for the stainless steel DV Container Valve. Stainless Steel Tamper-Evident Wire Brammal Seal 2 6 Stainless Steel DV Container Valve 7 HDPE Plastic DV Down Tube with Flex Bellows 3 Threads into IBC. This is the DV Container Valve only, no plastic tube is attached. For use with DV Fill Head and DV Dispense Couplers. For use after IBC is filled from DEF manufacturer thru transportation to end-user to ensure DV Container Valve has not been tampered. Plastic DV Dust Cover Simple dust cover for the Stainless Steel DV Container Valve (NON-Tamper Evident). For use when DV Dispense and Fill Head Coupler is disconnected from DV Container Valve. 4 Plastic Flex Tube Assembly for use with the DV Container Valve. 275 & 330 Gallon - IBC 8 This tube is cut for the 275 & 330 Gallon IBC for use through the top side bung opening. DV Container Valve Installation / Removal Tool Attaches to a standard torque wrench to install the DV Container Valve and tube into an IBC. Torques to 22 - 25 ft./lb. For use with DV Container Valve. Installer use only. 16 Order Toll-Free 1-866-755-4477 www.industrial.micromatic.com IBC - 275 & 330 Gallon DV Container Valve System Top Side Mounted - Components 1 On-Site Filling Returnable / Reusable / Refillable Fill - Transport - Dispense - Returnable / Reusable (On-Site Filling) Part Number 1 3 4 5 DV Vapor Recovery Fill Head Coupler (35 GPM Flow Rate) 7 8 4 Pin Viton® 2 DISPENSE - COUPLER 744-048 DV Dispense Coupler Horizontal 3/4 in. Barbed Outlet 4 Pin EPDM 744-050 DV Dispense Coupler Horizontal 3/4 in. BSPP Female Threaded Outlet 4 Pin EPDM 2.5" x 5 Buttress 4 Cam NA 2.5" x 5 Buttress and/or 2" BSP NA NA NA DV TAMPER EVIDENT CAP DV Container Valve 102-081 Tamper Evident Cap (Red) DV DUST COVER DV Container Valve 102-014 Dust Cover (Non-Tamper Evident) DV TAMPER EVIDENT WIRE DV Tamper Evident Wire Brammal Seal, 18" length x 1/16" diameter Stainless Steel CONTAINER VALVE CE-Z11-618 6 744-026 Thread / Pin / Cam Seal Type FILL HEAD - COUPLER (Filler Use Only) 744-026 2 Description 743-016 DV Container Valve 2" BSP / 4 Cam Viton® 743-096 DV Container Valve 2.5" x 5 / 4 Cam Viton® 743-097 DV Container Valve 2.5" x 5 / 4 Cam EPDM DOWN TUBE 743-203/975 DV Down Tube (HDPE Plastic) For 275 Gallon IBC (975 mm length, 1" diameter) NA NA TBD DV Down Tube (HDPE Plastic) For 330 Gallon IBC (TBD mm length, 1" diameter) NA NA 4 Cam NA NA NA INSTALLATION / REMOVAL TOOL (Installer Use Only) 741-084 DV Container Valve Install / Removal Tool 744-048 Horizontal 3/4" Barbed Outlet 3 4 102-081 102-014 5 CE-Z11-618 6 743-097 Diameter: 1 in. DV USER MANUAL 00274-I0808b DV Comprehensive Instruction Manual NOTE: All wetted metal components are stainless steel. 8 7 743-203/975 (For 275 Gallon IBC) 975 mm 741-084 (Installer Use Only) 00274-I0808b Order Toll-Free 1-866-755-4477 www.industrial.micromatic.com 17 EPV Container Valve System Connect & Disconnect EPV Container Valve System - Instructions CONNECT 2 3 1 Insert Coupler Push Coupler Down 1 Pull up Lever on Side of Coupler Turn Hose Clockwise DISCONNECT 2 3 Turn Hose Counter-Clockwise 4 Coupler Clicks & Locks in Place Pull Coupler up & Remove 00812-I0310 18 Order Toll-Free 1-866-755-4477 www.industrial.micromatic.com DV Container Valve System Connect & Disconnect DV Container Valve System - Instructions 1 Insert Coupler 1 Push Down Handle Button with Thumb CONNECT 2 3 Turn Handle Clockwise Push Down Handle DISCONNECT 2 3 Handle Unlocks & Releases up Turn Handle Counter-Clockwise 4 Handle Clicks, Locks & Remains Down 4 Pull up to Remove 00811-I0310 Order Toll-Free 1-866-755-4477 www.industrial.micromatic.com 19 00716-I0310 Copyright © 2009 Micro Matic USA, Inc. All Rights Reserved.