Download victor 9000

Technical Specifications (Continued Table)
99 Groups, during storage, the symbol “MEM”
Data Memory
gives indication, “FULL” mark will flash to
indicate the memory has been full.
The function of automatic capture and
maintain the maximum average value, under
Peak
general test mode, press HOLD button longer
Maintenance
till PEAK light is bright, that is, start PEAK test
function, also known as peak test.
Data
Preservation
Data Reference
Overflow
Display
*No signal
Indicator
Auto Shut Down
Battery Voltage
Meter Quality
Work
Temperature and
Moisture
Storage
Temperature and
Moisture
Insulation Rod
Dimension
Under general test mode, press HOLD button
to preserve data, “HOLD” symbol display.
“MR” symbol indicates, it can read the stored
data by turning upwards and downwards.
Exceed
measurement
range
overflow
function: “OL A” symbol display
When the receiver has not received transmit
signal, it will display “no- -”signal dynamically.
In about 15 minutes after booting, the meter
will shut down automatically, in order to
decrease the battery consumption.
When the battery voltage is below 4.8V, the
symbol of battery voltage “
”will show to
remind to replace battery.
Tester: About 335g (Including battery), total
quality of meter: about 2.5Kg (including
insulation rod and battery.)
-10℃～40℃； Below 80%Rh
-10℃～60℃； Below 70%Rh
φ32mm，1m/Section（5 Sections）
-6-