Download User ManUal

16 Buttplate
17 Trigger
Warning!
16.1 Removing the buttplate
Danger to life!
XX Release the clamping screw [x].
Danger to life from loaded firearm.
hh Make sure that the rifle is unloaded when carrying out
alignment and adjustment procedures.
XX Remove the buttplate [16] from the holder.
XX Fit in reverse order.
16.2 Adjusting the buttplate
Caution!
XX Release clamping screws [x] and [z].
Material damage!
XX Turn the knurled screws [y] until the desired tilt and length are achieved.
Damage to the trigger caused by the breech not being open
when the trigger is changed.
hh Open the breech when changing the trigger.
XX Move the buttplate [16] up or down until the desired height is set.
XX Retighten the clamping screws [x] and [z] hand tight.
$$ If just clamping screw [z] is released, only the height of the butt plate [16] will be able $
to be adjusted.
[16]
[y]
[z]
[y]
[x]
Fig.23 Buttplate
21