Download UG-VigorSwitch G2260..

¾
When one of its hosts joins a multicast address group to which none of its other hosts
belong, sends unsolicited group membership reports to that group.
¾
When the last of its hosts in a particular multicast group leaves the group, sends an
unsolicited leave group membership report to the all-routers group (244.0.0.2).
1.2 Features
The VigorSwitch G2260, a standalone off-the-shelf switch, provides the comprehensive
features listed below for users to perform system network administration and efficiently
and securely serve your network.
Hardware
z
20 10/100/1000Mbps Auto-negotiation Gigabit Ethernet TP ports
z
4 10/100/1000Mbps Combo ports
z
2 100/1000Mbps Dual-SFP Fiber media auto sense
z
1392KB on-chip frame buffer
z
Support jumbo frame up to 9600 bytes
z
Programmable classifier for QoS (Layer 4/Multimedia)
z
8K MAC address and 4K VLAN support (IEEE802.1Q)
z
Per-port shaping, policing, and Broadcast Storm Control
z
IEEE802.1Q Q-in-Q nested VLAN support
z
Full-duplex flow control (IEEE802.3x) and half-duplex backpressure
z
Extensive front-panel diagnostic LEDs; System: Power, TP Port1-24: LINK/ACT,
10/100/1000Mbps, SFP Port 21-24: SFP(LINK/ACT)
Management
z
Supports concisely the status of port and easily port configuration
z
Supports per port traffic monitoring counters
z
Supports a snapshot of the system Information when you login
z
Supports port mirror function
z
Supports the static trunk function
z
Supports 802.1Q VLAN
z
Supports user management and limits three users to login
z
Maximal packet length can be up to 9600 bytes for jumbo frame application
z
Supports DHCP Broadcasting Suppression to avoid network suspended or crashed
z
Supports to send the trap event while monitored events happened
z
Supports default configuration which can be restored to overwrite the current
configuration which is working on via web browser and CLI
z
Supports on-line plug/unplug SFP modules
z
Supports Quality of Service (QoS) for real time applications based on the
information taken from Layer 2 to Layer 4, such as VoIP
VigorSwitch G2260 User’s Guide
3