1
Download Protocol Translator DNP3 User Manual V1.0.9 R2
Transcript
Default Static Obj Var 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 Index 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 Binary Inputs 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Default Event Obj Var Class 6 5 4 status_rtu_pump_present[6][0] status_rtu_pump_present[6][0] status_rtu_pump_present[6][0] Page 14 0 7 status_rtu_pump_present[5][2] status_rtu_pump_present[6][0] 6 5 4 3 2 1 0 7 6 5 status_rtu_pump_present[6][1] status_rtu_pump_present[6][1] status_rtu_pump_present[6][1] status_rtu_pump_present[6][1] status_rtu_pump_present[6][1] status_rtu_pump_present[6][1] status_rtu_pump_present[6][1] status_rtu_pump_present[6][2] status_rtu_pump_present[6][2] status_rtu_pump_present[6][2] Binary Input 3 7 status_rtu_pump_present[6][1] status_rtu_pump_present[6][2] 0 status_rtu_pump_present[6][0] 4 1 status_rtu_pump_present[6][0] status_rtu_pump_present[6][2] 2 status_rtu_pump_present[6][0] 3 1 status_rtu_pump_present[5][2] status_rtu_pump_present[6][0] 2 status_rtu_pump_present[5][2] This bit will be high if the Master MonitorPRO has a faulted pump 6 due to a SCADA lockout fault being PRESEN and is low otherwise This bit will be high if the Master MonitorPRO has a faulted pump 6 due to a low flow warning fault being PRESEN and is low otherwise Reserved This bit will be high if the Master MonitorPRO has a faulted pump 7 due to any fault shown below being PRESEN and is low otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to an under current fault being PRESEN and is low otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to an over current fault being PRESENT an is low otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to a thermal alarm fault being PRESENT an is low otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to a phase fail fault being PRESENT and low otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to a phase rotation alarm fault bei PRESENT and is low otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to an earth fault being PRESENT and is lo otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to an insulation test fault being PRESEN and is low otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to a low flow fault being PRESENT and is lo otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to an analog input 2 fault being PRESEN and is low otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to an analog input 1 fault being PRESEN and is low otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to a digital input 6 fault being PRESENT an is low otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to a digital input 5 fault being PRESENT an is low otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to a digital input 4 fault being PRESENT an is low otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to a digital input 3 fault being PRESENT an is low otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to a digital input 2 fault being PRESENT an is low otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to a digital input 1 fault being PRESENT an is low otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to a digital output 3 fault being PRESEN and is low otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to a digital output 2 fault being PRESEN and is low otherwise This bit will be high if the Master MonitorPRO has a faulted pump 7 due to a digital output 1 fault being PRESEN and is low otherwise Reserved Bit Multitrode Cross-Reference Variable Description Procon V DNP 3.0 Device Profile Data Dictionary
