Download EurotestCOMBO - Alert Electrical

MI 3125B EurotestCOMBO
Data handling
The memory structure is organized in a way that is suited to BS 7671 and other
verification documents (Electrical Installation Certificate, Periodic Inspection Report
etc.). If the results are stored in appropriate memory locations an automatic creation of
a certificate/ report is possible.
Display organization
The installation structure field describes the location of the measurement (which
object, bord, circuit).
In the measurement field there is information about type and number of measurements
that belong to the selected structure element (object and block and fuse).
The main advantages of this system are:
‰
‰
‰
‰
Test results can be organized and grouped in a structured manner that reflects
the structure of the electrical installation.
Customized names of data structure elements can be uploaded from
EurolinkPRO PCSW.
Simple browsing through the structure and results.
Test certificates/ reports can be created with no or little modifications after
downloading results to a PC.
Figure 6.2: Installation structure and measurement fields
Installation structure elements
Memory operation menu
Data structure field
1st level:
OBJECT: Default location name (object and its
successive number).
nd
‰ 2
level:
D.BOARD: Default location name (distribution board
and its successive number).
rd
‰ 3 level:
CIRCUIT: Default location name (circuit and its
successive number).
ELECTRODE: Default location name (earth electrode).
BONDING xxx: Default location names (7 bonding
connections).
No. of measurements in selected location
[No. of measurements in selected location and its sublocations]
‰
51