Download Reflectashield TF BBA Certificate

Regulations
In the opinion of the BBA, Reflectashield TF, if installed, used and maintained in accordance with this Certificate, will
meet or contribute to meeting the relevant requirements of the following Building Regulations (the presence of a UK
map indicates that the subject is related to the Building Regulations in the region or regions of the UK depicted):
The Building Regulations 2010 (England and Wales) (as amended)
Requirement: C2(b)
Resistance to moisture
Comment:
Requirement: C2(c)
Resistance to moisture
Comment:
Requirement: L1(a)(i)
Conservation of fuel and power
Comment:
Regulation:
7
Materials and workmanship
Comment:
Regulation:
26
CO2 emission rates for new buildings
The product will contribute to a wall meeting this Requirement. See section 6.1 of this Certificate.
The product can contribute to limiting the risk of condensation. See sections 8.4 and 8.8 of this Certificate.
The product can contribute to meeting this Requirement. See section 7 of this Certificate.
The product is acceptable. See section 12.2 and the Installation part of this Certificate.
The product can contribute to meeting this Regulation. See section 7 of this Certificate.
Comment:
The Building (Scotland) Regulations 2004 (as amended)
Regulation:
8(1)
Fitness and durability of materials and workmanship
Comment:
Regulation:
Standard:
9
3.10
Building standards applicable to construction
Precipitation
The use of the product satisfies this Regulation. See section 12.2 and the Installation part of this Certificate.
The product will contribute to a wall satisfying clauses 3.10.1(1)(2) and 3.10.5(1)(2) of this Standard. See
section 6.1 of this Certificate.
Comment:
Standard:
3.15
Standard:
Standard:
6.1(b)
6.2
7.1(a)(b)
Statement of sustainability
The product can contribute to meeting the relevant requirements of Regulation 9, Standards 1 to 6
and therefore will contribute to a construction meeting a bronze level of sustainability as defined in this
Standard. In addition the product can contribute to a construction meeting a higher level of sustainability
as defined in this Standard, with reference to clauses 7.1.4 (1)(2) , 7.1.6(1)(2) and 7.1.7(1)(2) (Aspects 1(1)(2)
and 2(1)(2)) See section 7 of this Certificate.
Comment:
Regulation:
Carbon dioxide emissions
Building insulation envelope
The product can contribute to a wall satisfying the requirements of these Standards, with reference to
clauses 6.1.1(1), 6.1.2(2), 6.1.3(1), 6.1.6(1), 6.2.1(1)(2), 6.2.3(1), 6.2.4(2), 6.2.5(2), 6.2.6(1)(2), 6.2.7(1),
6.2.8(1)(2), 6.2.9(1)(2), 6.2.10(1), 6.2.11(1)(2), 6.2.12(1)(2) and 6.2.13(1)(2). See section 7 of this Certificate.
Comment:
Standard:
Condensation
The product can contribute to limiting the risk of condensation, with reference to clauses 3.15.1(1)(2),
3.15.4(1)(2) and 3.15.5(1)(2) of this Standard. See sections 8.4 and 8.9 of this Certificate.
Comment:
12
Building standards applicable to conversions
All comments given for this product under Regulation 9, Standards 1 to 6 also apply to this Regulation,
with reference to clause 0.12.1(1)(2) and Schedule 6(1)(2).
Comment:
(1) Technical Handbook (Domestic).
(2) Technical Handbook (Non-Domestic).
The Building Regulations (Northern Ireland) 2012
Regulation:
23(a)(i)(iii)(b)
Fitness of materials and workmanship
Comment:
Regulation:
28(b)
Resistance to moisture and weather
Comment:
Regulation:
29
Condensation
Comment:
Regulation:
Regulation:
39(a)(i)
40(2)
Conservation measures
Target carbon dioxide emissions rate
Comment:
The product is acceptable. See section 12.2 and the Installation part of this Certificate.
The product will contribute to a wall satisfying this Regulation. See section 6.1 of this Certificate.
The product can contribute to limiting the risk of condensation. See section 8.4 of this Certificate.
The product can contribute to satisfying these Regulations. See section 7 of this Certificate.
Construction (Design and Management) Regulations 2007
Construction (Design and Management) Regulations (Northern Ireland) 2007
Information in this Certificate may assist the client, CDM co-ordinator, designer and contractors to address their
obligations under these Regulations.
See section:
1 Description of this Certificate.
Page 2 of 8