Download english - Bad Request

Image adjust
Select [Image adjust] from the Main Menu (see
“Navigating through the menu” on page 42),
then select the item from the sub-menu.
Control Panel
Remote Control
Color
1111 Press ▲▼ to select [Color].
2222 Press the <ENTER> button to display
the adjustment dialog box.
3333 Press ◄► to adjust the setting value.
Operation
Adjustment
Adjustment
range
Press ►.
increase the
Maximum
intensity of the color value 63
Press ◄.
decrease the
Minimum
intensity of the color value 0
Note
zz When input video signal to the projector, [Color] will be
available.
Note
Contrast
1111 Press ▲▼ to select [Contrast].
2222 Press the <ENTER> button to display
the adjustment dialog box.
3333 Press ◄► to adjust the setting value.
Operation
Adjustment
Adjustment
range
Press ►.
increase the contrast
Maximum
value 63
Press ◄.
decrease the
contrast
Minimum
value 0
Brightness
1111 Press ▲▼ to select [Brightness].
2222 Press the <ENTER> button to display
the adjustment dialog box.
3333 Press ◄► to adjust the setting value.
Operation
Adjustment
Tint
1111 Press ▲▼ to select [Tint].
2222 Press the <ENTER> button to display
the adjustment dialog box.
3333 Press ◄► to adjust the tint value to
get a proper color balance.
zz Adjustments can be made between 0 and 63.
Note
zz When you select [NTSC] or [NTSC4.43] in System menu
under Video input signal, [Tint] will be available.
Settings
zz Make sure you selected [Store] after adjusting settings.
Some settings can not be stored if not registered with
[Store] function
Iris
1111 Press ▲▼ to select [Iris].
2222 Press the <ENTER> button to display
the adjustment dialog box.
3333 Press ◄► to select [Off] or [On].
Off
Disabled
On
Contrast is prioritized over brightness
Adjustment
range
Press ►.
increase the
brightness
Maximum
value 63
Press ◄.
decrease the
brightness
Minimum
value 0
ENGLISH - 51