Download User Manual

Tampering Detection
Note: CAM 3361 does not support tampering detection.
Tampering detection is similar to motion detection in that it detects where
there is a sudden unexpected change in the whole camera view. Parameters
for this feature are found under Event Notification > Tampering Detection.
Tampering alarm handling and notifications can be configured under Event
Settings.
The tempering detection parameters include:

Tampering Detection - Turns tampering detection on or off.

Tampering Sensitivity - Sets the sensitivity of Tampering Detection.
Options are Very Low, Low, Normal, High, and Very High. Higher
sensitivities can detect more tampering attempts, but also increase
the chances that the camera will produce a false alarm.
Click OK to save or Cancel to abort the changes before you leave the page.
139