Download Hitachi 28LD5000TA Tv User Guide Manual Operating Instructions Pdf

SM008
28LD5200E
(PW1L)
SERVICE MANUAL
Caution
Be sure to read this manual before servicing. To assure safety from fire, electric shock, injury, harmful radiation
and materials, various measures are provided in this HITACHI LCD monitor.
Be sure to read cautionary items described in the manual to maintain safety before servicing.
Service Warning
1. Since Panel Module is made of glass, handling the broken Module shall be taken care sufficiently in order
not to be injured.
2. Replacing work shall be started after the Panel Module and the AC/DC Power supply become sufficiently
cool.
3. Special care shall be taken to the display area in order not to damage its surface.
4. The Panel Module shall not be touched with bare hand to protect its surface from stains.
5. It is recommended to use clean soft gloves during the replacing work in order to protect not only the display area of the Panel Module but also a serviceman himself.
Contents
1.
2.
3.
4.
5.
6.
Features --------------------------------------------------3
Specifications --------------------------------------------4
Component names -------------------------------------5
Adjustment -----------------------------------------------6
Troubleshooting --------------------------------------- 19
Self diagnosis function ------------------------------ 22
7. Replacement parts list------------------------------- 23
8. Block diagram ----------------------------------------- 24
9. Connection diagram --------------------------------- 26
10.Wiring diagram ---------------------------------------- 27
11. Disassembly diagram-------------------------------- 28
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.
LCD Television
March 2004 Digital Media Division
Downloaded From TV-Manual.com Manuals
28LD5000TA (PW1L)
CAUTION FOR SAFETY
Please read this page before repairing the monitor.
This page explains the following items to ensure the safety of set and prevent accidents
during repair work.
We explain by symbols what damage or injury may occur if errors are made.
Warning
This symbol means "possible to cause death or serious injury"
Caution
This symbol means "possible to cause damage or something may break"
We symbols below have the following meanings.
This symbol means "CAUTION"
This symbol means "MUST"
This symbol means "POSSIBLE to
ELECTRIC SHOCK"
This symbol means "DO NOT"
WARNING
Should follow instructions.
Should keep same style of wiring or component.
Indicates cabinet, chassis and parts
by label, which need special attention.
Please follow notes and Safety Instructions of User’s Manual.
Monitor uses tubes or tapes, which are
insulators, and some components are
kept a distance from surface of PWB for
safety.
Internal leads kept from hot part or high voltage part by clamper or styling, so please
return to original condition to prevent electric shock or fire.
Prevent electric shock.
Please take care during working because
monitor has high voltage part and power
supply part.
Possible to die if you touch these
places by mistake.
Please disconnect power plug during
overhaul, reassembly or changing parts.
You could die or suffer from electric
shock if you touch live part.
Should do safety check when finished.
Every part (removed screws, component
and wiring) should be returned to previous
condition.
Check around repair for possible
damage by mistake and measure the
insulated impedance by meg-ohm meter.
Confirm the value of impedance, that
value is more than 4M ohm.
It could cause electric shock or fire if this
value is less than 4M ohm.
Use recommended components.
Please use same characteristic component, which is same as original for your
safety and reliability. Especially those
marked by
in parts list and circuit diagram.
It may cause electric shock or fire if you
use non-recommended component.
Nobody can check and repair the code
and combination circuit of HDCP.
Never remove the shield case, which is
attached to the code and combination
circuit of HDCP.
2
Downloaded From TV-Manual.com Manuals
28LD5200E (PW1L)
PRECAUTIONS
● How to clean the LCD screen panel of the monitor
Before cleaning the monitor, turn off the monitor and disconnect the power plug from the power outlet.
To prevent scratching or damaging the LCD screen face, do not knock or rub the surface with sharp or hard
objects. Clean the screen with a soft cloth moistened with warm water and dry with a soft cloth. If it is not
enough, then use a cloth with mild detergent. Do not use harsh or abrasive cleaners.
● How to clean the cabinet of the monitor
Use a soft cloth to clean the cabinet and control panel of the monitor. When excessively soiled dilute a neutral
detergent in water, wet and wring out the soft cloth and afterward wipe with a dry soft cloth.
Never use acid/alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax,
glass cleaner, etc. especially because they would cause discoloration, scratches or cracks.
1. Features
● Large-screen, high-definition LCD panel
The 28-inch color LCD panel, with a resolution of 1280 (H) x 768(V) pixels, creates a high-definition, large-screen
(aspect ratio : 15:9) and low-profile flat display. Free from electromagnetic interferences from geomagnetic sources
and ambient power lines, the panel produces high-quality display images free from color misconvergence and display
distortion.
● High Performance Digital Processor
A wide range of personal computer signals can be handled, from 640 x 400, 640 x 480 VGA to 1600 x 1200 UXGA.
(RGB Analog input)
● Easy-to-use remote control and on screen display system
The remote control included eases the work of setting display controls. Further, the on-screen display system,
displays the status of signal reception and display control settings in an easy-to-view fashion.
● Power saving system
The International ENERGY STAR power saver feature saves power consumption automatically when input signals are not available.
When connected to a VESA DPMS-compliant PC, the monitor cuts its power consumption while it is idle.
● TruBass
TruBass, SRS and ( ) symbol are trademarks of SRS Labs,Inc.
TruBass technology is incorporated under license from SRS Labs, Inc.
● One mini D-sub terminal and one DVI-D terminal for RGB input
The D-sub terminal can also receive the RGB-component by On-Screen Display control.
● One composite/S.video input terminal and two component video input terminals.
One component input is possible to switch to RGB signal input from the Menu screen.
● One SCART terminal for the signal of the European standard.
It operates as composite/S.video input and RGB input terminal, or composite video output terminal.
● One composite video output terminal as a monitoring output.
● Various input/output terminals.
● Tuner and TELETEXT receiver.
● High performance type of the remote control.
3
Downloaded From TV-Manual.com Manuals
28LD5200E (PW1L)
2. Specifications
Panel
Display
dimensions
Approx. 28 inches (599.04 (H) x 359.42 (V) mm)
Resolution
1280 (H) x 768 (V) pixels
Net dimensions
854 (W) x 516 (H) x 277 (D) mm
Net weight
21.9kg
Ambient
conditions
Temperature
Operating : 5 C to 35 C, Storage : 0 C to 60 C
Relative humidity
Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)
Power supply
AC100 - 240V, 50/60Hz
Power consumption/at standby
155W / <1W
Audio output
12W + 12W (6 )
(RGB input)
Input signals
Input terminals
RGB1 DVI input terminal (DVI-D)
RGB1 audio input terminal (3.5mm Stereo Mini Jack)
RGB2 analog RGB input terminal (D-sub 15-pin)
RGB2 audio input terminal (3.5mm Stereo Mini Jack)
Video signals
0.7 V/1.0 Vp-p, analog RGB (Recommended Signal)
480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/60
Sync signals
H/V separate, TTL level [2K ]
H/V composite, TTL level [2K ]
Sync on green, 0.3 Vp-p [75 ]
Input terminals
AV1: composite video input terminal (RCA)
AV1: Y PB PR video input terminal (RCA)
AV1: L/R audio input terminal (RCA)
AV2: composite video input terminal (RCA)
AV2: Y/G PB/B PR/R video input terminal (RCA)
AV2: L/R audio input terminal (RCA)
AV3: composite video input terminal (RCA)
AV3: S video input terminal (RCA)
AV3: L/R audio input terminal (RCA)
AV4: composite video / S video / RGB / L/R audio input terminal (Scart)
Video signals
AV1: PAL, SECAM, NTSC3.58, NTSC4.43
AV1: 480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/60
AV2: PAL, SECAM, NTSC3.58, NTSC4.43
AV2: 480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/60, RGB
AV3: PAL, SECAM, NTSC3.58, NTSC4.43
AV4: PAL, SECAM, NTSC3.58, NTSC4.43
AV4: RGB
(Video input)
Input signals
OUTPUT (MONITOR): composite video monitor-output terminal (RCA)
OUTPUT (MONITOR): L/R audio monitor- output terminal (RCA)
AV4: composite video / L/R audio output terminal (SCART)
Video output Signal
(RF input)
Input terminals
ANT : 75
RF Video System
PAL B, G, H / I / D, K
Unbalanced
Input signals
SECAM B, G / D, K / K1
Applicable video signals for each input terminal
Terminal
Signal
RCA/SCART
CVBS
S-video
Component
DVI
RGB
PC
D-sub
STB
RGB
Component
AV1
AV2
AV3
AV4
RGB1
RGB2
(
4
Downloaded From TV-Manual.com Manuals
:Available)
28LD5200E (PW1L)
3. Component names
[ Main unit ]
Control panel
These buttons are located on the top.
INPUT SELECT button
(OK button)
PROGRAM UP button
( SELECT button)
PROGRAM DOWN
button ( SELECT
button)
VOLUME
SUB-POWER button
UP/DOWN
buttons
(
ADJUST buttons)
( ) indicates the function while the MENU is displayed on the screen.
MENU button
[ Remote Control ]
CLE-958
5
Downloaded From TV-Manual.com Manuals
28LD5200E (PW1L)
4.Adjustment
● How to get to Adjustment mode
Using the front control buttons with the set turned off (standby) can activate it.
Press the SUB-POWER( ) button, INPUT SELECT( ) button and button at the same time, and hold
for more than 5 seconds.
The set turns on in adjustment mode with OSD.
● Changing data and Selecting Adjustment code
When the set is in adjustment mode, the cursor , , , and OK buttons of the remote control or front
panel may be used as the adjustment keys.
, buttons are used for selecting adjustment code.
,
buttons are used for changing data values.
OK button is used for confirming the data.
After finishing the necessary adjustment press MENU button. Adjustment mode is released and the set
returns to normal condition.
● Memory Initialize operation
NOTE: The execution of this function returns the adjustment codes to the preset values, therefore, adjustment data will be lost.
Procedure
(1) Enter Adjustment Mode.
(2) Select MEMORY INIT adjustment code (No.704) and change the data value from 0 to 1.
(3) Activate MEMORY INIT by pressing OK button for more than 3 seconds.
(4) Select No.374 and change data value from 1 to 0.
(5) Check that the receiving channel goes to AV1. Unit is set to preset values.
6
Downloaded From TV-Manual.com Manuals
28LD5200E (PW1L)
Service adjustment items by I2C-bus control
O : Should be adjusted
: Should be followed previous data
Changed Component
Function
ADJ.
No.
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
Adjustment Items
R DRIVE1 [TV/VIDEO/DSUB-COMP]
G DRIVE1 [TV/VIDEO/DSUB-COMP]
B DRIVE1 [TV/VIDEO/DSUB-COMP]
R DRIVE2 [TV/VIDEO/DSUB-COMP]
G DRIVE2 [TV/VIDEO/DSUB-COMP]
B DRIVE2 [TV/VIDEO/DSUB-COMP]
R DRIVE3 [TV/VIDEO/DSUB-COMP]
G DRIVE3 [TV/VIDEO/DSUB-COMP]
B DRIVE3 [TV/VIDEO/DSUB-COMP]
R DRIVE4 [TV/VIDEO/DSUB-COMP]
G DRIVE4 [TV/VIDEO/DSUB-COMP]
B DRIVE4 [TV/VIDEO/DSUB-COMP]
R DRIVE1 [DVI-PC/DVI-STB/DSUB-RGB]
G DRIVE1 [DVI-PC/DVI-STB/DSUB-RGB]
B DRIVE1 [DVI-PC/DVI-STB/DSUB-RGB]
R DRIVE2 [DVI-PC/DVI-STB/DSUB-RGB]
G DRIVE2 [DVI-PC/DVI-STB/DSUB-RGB]
B DRIVE2 [DVI-PC/DVI-STB/DSUB-RGB]
R DRIVE3 [DVI-PC/DVI-STB/DSUB-RGB]
G DRIVE3 [DVI-PC/DVI-STB/DSUB-RGB]
B DRIVE3 [DVI-PC/DVI-STB/DSUB-RGB]
R DRIVE4 [DVI-PC/DVI-STB/DSUB-RGB]
G DRIVE4 [DVI-PC/DVI-STB/DSUB-RGB]
B DRIVE4 [DVI-PC/DVI-STB/DSUB-RGB]
Black Level(RGB_AMP)
Black Level(RGB_AMP)
Reference Amplitude(RGB_AMP)
Reference Amplitude(RGB_AMP)
Display for Max. Amplitude Level
Display for Max. Amplitude Level
SUB_CONTRAST(RF)
SUB_CONTRAST (AV1)
SUB_CONTRAST(RF)
SUB_CONTRAST (AV4)
SUB_COLOR(VIDEO-PAL/SECAM)
SUB_COLOR(RF-PAL/SECAM)
SUB_COLOR(VIDEO-NTSC)
SUB_COLOR(RF-NTSC)
SUB_COLOR(VIDEO-PAL/SECAM)
SUB_COLOR(RF-PAL/SECAM)
SUB_COLOR(VIDEO-NTSC)
SUB_COLOR(RF-NTSC)
TINT(VIDEO)
TINT(RF)
TINT(VIDEO)
TINT(RF)
S_B-Y_ADJ
S_R-Y_ADJ
S_B-Y_ADJ
S_R-Y_ADJ
BPF_Q (4.43MHz)
BPF_f0 (4.43MHz)
Y_DL (4.5MHz) For Asia
Y_DL (5.5MHz PAL/NTSC4.43) For Asia
Y_DL (5.5MHz SECAM) For Asia
Y_DL (6.0PAL/NTSC4.43) For Asia
Y_DL (6.0SECAM) For Asia
Y_DL (VIDEO PAL/NTSC4.43)
Y_DL (VIDEO SECAM)
Y_DL (VIDEO NTSC)
BELL_f0
Y_OUT_LEVEL (VIDEO)
Initialize function for EEPROM of Video PWB board
Y_OUT_LEVEL (TEXT)
C_OUT_LEVEL (VIDEO)
Check condition of EEPROM of Video PWB board
C_OUT_LEVEL (TEXT)
Y_OUT_LEVEL (TEXT)
Y_OUT_LEVEL (VIDEO)
Dispersion Time of Sustain current 0: 2 Times, 1: 4 times
C_OUT_LEVEL (TEXT)
C_OUT_LEVEL (VIDEO)
Dispersion Time of Sustain current 0: 2 Times, 1: 4 times
BPF_Q (4.43MHz)
BPF_f0 (4.43MHz)
Y_DL (4.5MHz) For Asia
Y_DL (5.5MHz PAL/NTSC4.43) For Asia
Y_DL (5.5MHz SECAM) For Asia
Y_DL (6.0PAL/NTSC4.43) For Asia
Y_DL (6.0SECAM) For Asia
Y_DL (VIDEO PAL/NTSC4.43)
Y_DL (VIDEO SECAM)
Y_DL (VIDEO NTSC)
BELL_f0
C_TRAP_SW (COMB=OFF-PAL/NTSC4.43/NTSC3.58)
C_TRAP_SW (COMB=OFF-PAL/NTSC4.43/NTSC3.58)
MVM(VIDEO)
AFC_GAIN (AV00)
AFC_GAIN (AV1)
AFC_GAIN (AV2)
AFC_GAIN (AV3)
AFC_GAIN (AV4)
S_INHBT
S_ID
Mode
COOL
COOL
COOL
NORMAL
NORMAL
NORMAL
WARM
WARM
WARM
BLACK & WHITE
BLACK & WHITE
BLACK & WHITE
COOL
COOL
COOL
NORMAL
NORMAL
NORMAL
WARM
WARM
WARM
BLACK & WHITE
BLACK & WHITE
BLACK & WHITE
TV/VIDEO
PC
TV/VIDEO
PC
Main
SUB
MAIN
MAIN/SUB COMPOSITE mode
SUB
MAIN/SUB COMPOSITE mode
MAIN
MAIN
MAIN
MAIN
SUB
SUB
SUB
SUB
MAIN
MAIN
SUB
SUB
MAIN
MAIN
SUB
SUB
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
0:Normal, 1:Abnormal(Fail or no assembly)
MAIN
SUB
SUB
For Dynamic (Day) mode
SUB
SUB
For Natural (Night) mode
SUB
SUB
SUB
SUB
SUB
SUB
SUB
SUB
SUB
SUB
SUB
MAIN
SUB
-
7
Downloaded From TV-Manual.com Manuals
Maximum
Formatter VIDEO TUNER LCD
Default
Value
PWB
PWB
PWB PANEL
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
254
254
254
254
15
15
15
15
15
15
15
15
15
15
15
15
63
63
63
63
15
15
15
15
3
3
10
10
10
10
10
10
10
10
1
63
1
63
63
1
63
63
63
1
63
63
1
3
3
10
10
10
10
10
10
10
10
1
1
1
1
3
3
3
3
3
1
1
230
230
255
230
230
230
230
230
230
230
230
230
230
230
255
230
230
230
230
230
230
230
230
230
127
127
127
7
7
7
7
0
3
0
11
0
3
0
11
33
33
33
33
8
8
8
8
3
1
5
3
0
9
9
6
8
6
0
13
0
0
21
0
12
13
0
7
21
1
3
1
5
2
0
7
10
8
6
5
0
0
0
0
0
0
0
0
0
0
0
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
28LD5200E (PW1L)
O : Should be adjusted
: Should be followed previous data
Changed Component
Function
ADJ.
No.
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
Adjustment Items
S_GP
S_V_ID
BELL/HPF
Cb offset1
Cr offset1
Cb offset1
Cr offset1
Sharpness Gain(VIDEO) PAL
Sharpness Gain(RF)
Sharpness EQ(4.5MHz)
Sharpness EQ(5.5MHz)
Sharpness EQ(6.0/6.5MHz)
Sharpness EQ(VIDEO)
Sharpness f0(VIDEO) PAL
Sharpness f0(RF)
Sharpness Gain(VIDEO) PAL
Sharpness Gain(RF)
Sharpness EQ(4.5MHz)
Sharpness EQ(5.5MHz)
Sharpness EQ(6.0/6.5MHz)
Sharpness EQ(VIDEO)
Sharpness f0(VIDEO) PAL
Sharpness f0(RF)
LPF
LPF
SECAM D-Trap
FILTER SW(RF)
FILTER SW(RF)
NTSC Comb(Comb off)
HS Phase
HS Phase
P/N ID
P/N ID
Y/C_SEP_MODE (COMB=OFF-PAL)
Y-Pf0
Y-EQ_GAIN
Y-EQ/N.C_LIM
Y-LPF
V-EMPH_GAIN
V-EMPH_N.L
V-EMPH_CORE
D RANGE
DY_GAIN
DC_GAIN
VAP_GAIN
VAP_INV
YH_CORE
YHCGAIN
CDL
YNRK
YNRINV
YNRLIM
CNRK
CNRINV
CNRLIM
YPFG
SEPA_LEVEL
SEPA_LEVEL
SEPA_LEVEL
SEPA_LEVEL
AUTO_FM/AM(D11-D8)
AUTO_FM/AM(D7-D0)
A2_THRESHOLD(D11-D8)
A2_THRESHOLD(D7-D0)
PRE_AM
VOL_SCART1 (D15-D8)
VOL_SCART1 (D7-D5)
PRE_SCART
PRE_FM
PRE_FM
PRE_FM
PRE_FM
PRE_FM
PRE_FM
PRE_FM
PRE_NICAM
Screen Saver-Picture shift amount 0:1pixel 1:2pixel 2:3pixel
Thermo sensor function available or not 0:None,1:Yes
Video Input function available or not at RGB1 & RGB2 mode
Screen Saver-Picture shift direction 0:dia 1:cross 2:up/down 3:left/right
AUDIO Function available 0:NO,1:YES
Remote Function available 0:NO,1:YES
Power Save On/Off Setting at Initialize,Reset and Shipping
DVI-STB/RGB-COMPONENT Function available 0:NO,1:YES
Dynamic Backlight function 0:No, 1:Yes
ISM Control for WVGA
Terminal Mode Function available 0:Not Available, 1:Available
Black insert function 0:Not available, 1:Available
AGC_LEVEL AGCL
TEXT H sync delay
TEXT V sync delay
TEXT_H_POSITION
TEXT_V_POSITION
Lower Limits value for Sync Detect of 2ms interval
Mode
MAIN
MAIN
SUB
SUB
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
MAIN
SUB
SUB
SUB
SUB
SUB
SUB
SUB
SUB
MAIN
SUB
MAIN/SUB
MAIN
SUB
SUB
MAIN
SUB
MAIN
SUB
MAIN NTSC mode
MAIN NTSC mode
MAIN NTSC mode
MAIN NTSC mode
MAIN NTSC mode
MAIN NTSC mode
MAIN NTSC mode
MAIN NTSC mode
MAIN NTSC mode
MAIN NTSC mode
480i/576i
480p/576p
1080i_50
1080i_60/720p
Except 4.5MHz (Except Dual/Stereo mode)
4.5MHz(JAPAN)
4.5MHz(Except BTSC-SAP mode)
4.5MHz(BTSC-SAP)
4.5MHz(Except KOREA-Dual/Stereo mode)
4.5MHz(KOREA-Dual/Stereo)
Except 4.5MHz(Except Dual/Stereo mode)
Except 4.5MHz(Dual/Stereo mode)
-
0:Not available, 1:Available
0:Change 1: Don't Change
For LCD model
RS232C
For Dynamic mode or Day mode (For LCD model only)
ALL Mode
For AFC at TV mode
8
Downloaded From TV-Manual.com Manuals
Maximum
Formatter VIDEO TUNER LCD
Default
Value
PWB
PWB
PWB PANEL
3
1
3
15
15
15
15
15
15
3
3
3
3
3
3
15
15
3
3
3
3
3
3
1
1
1
1
1
1
1
1
1
1
3
1
3
3
1
7
7
3
1
15
15
7
31
3
1
7
1
1
3
1
1
3
15
3
3
3
3
15
254
15
254
254
254
7
254
254
254
254
254
254
254
254
254
2
1
1
3
1
1
2
1
1
1
1
1
3
127
127
254
254
254
0
0
3
8
8
8
8
10
5
1
1
1
1
2
2
9
5
1
1
1
1
2
2
0
0
1
0
0
1
0
0
0
0
0
0
2
0
0
3
3
1
0
9
6
5
31
0
1
3
1
0
1
1
0
1
8
2
2
2
2
2
189
0
112
17
115
0
31
34
32
60
19
34
17
27
57
0
0
1
0
1
1
0
0
1
1
0
0
0
0
50
42
38
25
28LD5200E (PW1L)
O : Should be adjusted
: Should be followed previous data
Changed Component
Function
ADJ.
No.
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
Adjustment Items
Upper Limits Value for Sync Detect of 2ms interval
Lower Limits value for Sync Detect of 2ms interval
Upper Limits Value for Sync Detect of 2ms interval
Lower Limits value for Sync Detect of 2ms interval
Upper Limits Value for Sync Detect of 2ms interval
Lower Limits value for Sync Detect of 2ms interval
Upper Limits Value for Sync Detect of 2ms interval
Counting time for discrimination of fV
Dispersion Time of Sustain current 0: 2 Times, 1: 4 times
Counting time for discrimination of SYNC
Input Source of fV/fH judghment(0:M30625/TA1370)
Counting time for discrimination of fV(M30625/TA1370)
Y_DL (6.5MHz PAL/NTSC4.43) For Asia
Y_DL (6.5MHz SECAM) For Asia
Y_DL (6.5MHz PAL/NTSC4.43) For Asia
Y_DL (6.5MHz SECAM) For Asia
PDP-BLK ON/OFF
Counting time for discrimination of fH(M30625/TA1370)
Sharpness f0(L)
NJW1320_OUT1_GAIN
NJW1320_OUT2_GAIN
Sharpness f0(L')
AFC_GAIN (Except AV00 mode)
Recovery to an error of OSC frequency of Ceramic resonator for timer
Brightness Center (CM)
Brightness Center (CM)
Brightness Center (CM)
Reset function of accumulation time for WVGA/LCD Panel
Contrast Center (CM) Except WVGA & LCD
Power key function available or not (At Force AVC mode)
Color Center (CM)
Color Center (CM)
Color Center (CM)
Tint Center (CM)
Tint Center (CM)
Tint Center (CM)
Tint Center (CM)
Center of Sharpness (HV Enhancer Gain for Y) For Europe
Center of Sharpness (HV Enhancer Gain for Y) For Europe
Center of Sharpness (HV Enhancer Gain for Y) For Europe
Center of Sharpness (HV Enhancer Gain for Y) For Europe
Center of Sharpness (HV Enhancer Gain for Y) For Europe
Center of Sharpness (HV Enhancer Gain for Y) For Europe
Center of Sharpness (HV Enhancer Gain for Y) For Europe
Maximum Value of Contrast at REAL/NORMAL mode
Offset Value of Contrast data at SPLIT mode
Offset value of gain for Black Stretch function
Demonstration [White] 0-3:None,4:0,5:+10W,6:+20W,7:+30W
Demonstration 0:Normal, 1:Peak
Demonstration [Middle] 0:+0W,1:+10W,2:+20W,3:+30W
Demonstration 0:Normal, 1:Peak
Horizontal Enhance
YNR Input Level at Low level for DVI-STV Mode
YNR Input Level at Low level for DVI-STV Mode
CNR Input Level at Low level for DVI-STV Mode
CNR Input Level at Low level for DVI-STV Mode
Vertical Enhance
Demonstration Mode 0:(Off), 1:(On)
WVGA sys_state
WVGA BRIGHTNESS
Enhancer gain of VH for C
YNR(NR) Input Level
YNR Input Level at Low level for AV1-4 Mode
YNR Input Level at Low level for AV1-4 Mode
YNR Input Level at Low level for AV1-4 Mode
YNR Input Level at Low level for AV1-4 Mode
CNR Input Level at Low level for AV1-4 Mode
CNR Input Level at Low level for AV1-4 Mode
CNR Input Level at Low level for AV1-4 Mode
CNR Input Level at Low level for AV1-4 Mode
Heat APC function (HAPC) available
select(0:1.0 1:2.2 2:2.8)
select(0:1.0 1:2.2 2:2.8)
Select for APC function
"CCFMD" function
"CCFMD" function
NTSC/EBU(CCFORM)
NTSC/EBU(CCFORM)
NTSC/EBU(CCFORM)
Correction for Tracking (DCBON)
Correction for Tracking (DCBON)
Correction for Tracking (DCBON)
Color Temp. Correction
Typical Value of Contrast OSD
PC Power Save function (0:Impossible 1:Possible)
Waite Time for POWER SAVE function (s)
Lower Limits value for Sync Detect of 2ms interval
Upper Limits Value for Sync Detect of 2ms interval
Horizontal Position of OSD
Vertical Position of OSD
PinP Function 0:PinP, 1:Infomation1, 2:Infomaiton Split
Select for WIDE Mode
Temperature for Fun start (Temp_High)
Temperature for Fun stop (Temp_Low)
Mode
For AFC at TV mode
For Free Running at TV mode
For Free Running at TV mode
For AUTO OFF at TV mode
For AUTO OFF at TV mode
For Free Running at AV mode
For Free Running at AV mode
For PC mode
Component Mode
Main
Main
Sub
Sub
1:ON, 0:OFF
Sub
VIDEO PWB
VIDEO PWB
Sub
Except AV00 mode
NT2/NT3/HD2/HD3/PAL2/PAL3/HD9/HD10/NT4/PAL4
HD1/HD4/HD5/HD6/HD7/HD8
MULTI PICTURE/NT1/PAL1
0:Normal 1:Reset
TV/VIDEO(AV3/AV4 mode)
0:Available 1:Cannot
NT1/NT2/NT4/HD3/HD4/HD6/PAL4
PAL1/PAL2/HD8/HD9
NT3/HD1/HD2/HD5/PAL3/HD7/HD10
PAL1
NT1/NT2/NT4/HD3/HD4/HD6
PAL2/HD8/HD10/PAL4
NT3/HD1/HD2/HD5/PAL3/HD7/HD9
TV
VIDEO
HD5/HD6
HD1/HD4/HD7/HD8
HD2/HD3/HD9/HD10
NT2/NT3/PAL2/PAL3/NT4/PAL4
TEXT(for split)
Except OFF/LOW/HIGH mode
Mode(common)
Mode
Mode(common)
Mode
TEXT
1080i-60/1080i-50/720p-60
480i/480p/576i/576p/VGA
1080i-60/1080i-50/720p-60
480i/480p/576i/576p/VGA
TEXT
For WVGA
For WVGA
TEXT
RF Mode
VIDEO
NT2/NT3/PAL2/PAL3/NT4/PAL4
HD1/HD4/HD5/HD6/HD7/HD8
HD2/HD3/HD9/HD10
VIDEO
NT2/NT3/PAL2/PAL3/NT4/PAL4
HD1/HD4/HD5/HD6/HD7/HD8
HD2/HD3/HD9/HD10
TV/VIDEO
DVI-PC/DVI-STB/DSUB-RGB
TV/VIDEO
DVI-PC/DVI-STB/DSUB-RGB
NT1/NT2/HD3/HD4/HD6/HD8/HD10/PAL1/PAL2
TV/VIDEO/NT3/PAL3/HD1/HD2/HD5/HD7/HD9/NT4/PAL4
DVI-PC/DVI-STB/DSUB-RGB
TV/VIDEO-Color Temp. : COOL
TV/AV-Col. Temp. : Nor/War
DVI-PC/DVI-STB/DSUB-RGB
DYNAMIC
VIDEO/PC
For Power Save at AV mode
For Power Save at AV mode
60Hz
60Hz
9
Downloaded From TV-Manual.com Manuals
Maximum
Formatter VIDEO TUNER LCD
Default
Value
PWB
PWB
PWB PANEL
254
254
254
254
254
254
254
31
1
31
1
31
10
10
10
10
1
31
3
1
1
3
3
62
254
254
254
1
254
1
127
127
127
254
254
254
254
31
31
31
31
31
31
31
254
120
63
7
1
3
1
3
7
7
7
7
3
1
1
1
31
7
7
7
7
7
7
7
7
7
1
2
2
1
1
1
1
1
1
1
1
1
3
31
1
254
254
254
15
15
2
1
254
254
40
30
45
25
35
30
45
2
1
2
0
2
7
10
4
10
0
2
2
0
0
2
0
34
128
128
128
0
137
0
46
50
58
140
130
108
140
15
15
6
10
10
14
7
188
55
33
5
1
3
0
3
2
2
2
2
3
0
0
0
0
3
3
3
3
3
3
3
3
3
1
1
1
0
0
0
0
0
0
0
1
1
2
31
1
15
5
200
7
7
0
1
58
55
28LD5200E (PW1L)
O : Should be adjusted
: Should be followed previous data
Changed Component
Function
ADJ.
No.
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
Adjustment Items
Display of internal temperature C°(Temperature)
Display of Panel map version
accumulation time for Panel (hours)
Initialize function 0:Keep data, 1:Initialize
L standard PLL gating HIGH [Europe model]
Select for APC output [Except Europe model]
Q mode 0:Freeze, 1:Move 1, 2:Move 2
AGC adjustment (MFE) [Except Europe model]
AGC adjustment (MFE) [Europe model]
AGC INPUT(MFE)
Q mode 0:Freeze, 1:Move 1, 2:Move 2
SUB CONTRAST AV2
SUB CONTRAST AV3
Contrast Center (CM) Except WVGA & LCD
Contrast Center (CM) Except WVGA & LCD
Brightness center (CM) offset
Brightness center (CM) offset
Q mode 0:Freeze, 1:Move 1, 2:Move 2
3D ON/OFF 0:ON,1:OFF(Through)
Input Select of TA1370 0:HD1/VD1,1:HD3/VD3
Sharpness Gain(RF/NR)
3Line Y/C Main- Sub SW
Offset Value(+/-) of Upper Limit (for TB1274:SUB-CONT)
Offset Value(+/-) of Upper Limit (for FC :RGB-AMP )
Reference Amplitude(RGB_AMP)
Component Frq.(fH) Setup (0:28/31/33/45KHz,1:28/31/45KHz)
Terget value of White peak Adj.
Sharpness Gain(S VIDEO)
Sharpness Gain(S VIDEO)
Select color control (0: Asia, 1: South America)
Sharpness Gain Main(N-PAL)
Sharpness f0 Main(N-PAL)
Sharpness Gain Sub (N-PAL)
Sharpness f0 Sub (N-PAL)
Delay Time ON/OFF for Lipsync circuit 0:Off, 1:On
Sync Mode SW
Set Sound System at Auto mode of Sound Sys. (0:auto,1:4.5MHz)
Power condition at power save mode of PC mode after done RESET function
Switch to North USA model from Europe software. OSD change (Wide Mode,...)
Count Souce for ON/OFF Timer
Select Wide mode for Europe model (Normal= 5mode/ For Service= 10 mode)
Forced AVC type available
Sharpness Gain Main(M-PAL)
Sharpness f0 Main(M-PAL)
Sharpness Gain Sub (M-PAL)
Sharpness f0 Sub (M-PAL)
CNR Input Level at Low level for Dsub Comp. Mode
CNR Input Level at Low level for Dsub Comp. Mode
CNR Input Level at Low level for Dsub Comp. Mode
Sharpness Gain(VIDEO) NTSC3.58
Sharpness f0(VIDEO) NTSC3.58
Sharpness Gain(VIDEO) NTSC3.58
Sharpness f0(VIDEO) NTSC3.58
Sharpness Gain(VIDEO) SECAM,B/W
Sharpness f0(VIDEO) SECAM,B/W
Sharpness Gain(VIDEO) SECAM,B/W
Sharpness f0(VIDEO) SECAM,B/W
Sharpness Gain(VIDEO) NTSC4.43
Sharpness f0(VIDEO) NTSC4.43
Sharpness Gain(VIDEO) NTSC4.43
Sharpness f0(VIDEO) NTSC4.43
Brightness Limitted Function of PANEL [APSON]
VsVa WAIT TIMER [RISTIM]
Initial value of Contrast
Interval time of correction time
Additional value of Contrast
Initial value of Contrast
Interval time of correction time
Additional value of Contrast
L_PLL.GAIN
AS[YHECLPL0_P0]
AS[YHECLPL1_P0]
[YHECLPL2_P0]
AS[YHECLPL3_P0]
SEPA_LEVEL_DSUB
SEPA_LEVEL_DSUB
SEPA_LEVEL_DSUB
SEPA_LEVEL_DSUB
HD-PHASE_DSUB
HD-PHASE_DSUB
HD-PHASE_DSUB
HD-PHASE_DSUB
Y_DL (L)
Y_DL (L')
Y_DL (L)
Y_DL (L')
Sharpness Gain(L)
Sharpness Gain(L')
Sharpness Gain(L)
Sharpness Gain(L')
Sharpness f0(L)
Sharpness f0(L')
BURN-IN enable/ disenable
BURN-IN mode
Mode
No.0-No.23,30-33,42-45,289,293,294Adj No.741-743,
Main FE
50Hz
MAIN
MAIN
MAIN
70Hz(PC)
MAIN/SUB COMPOSITE mode
MAIN/SUB COMPOSITE mode
AV2
AV1
AV2
AV1
60Hz
Main/Sub
Main/Sub
0:Main, 1: Sub
Single Picture mode
Multi Picture mode
Multi Picture mode
Single Picture mode
Main
Sub
Main/Sub
Main
0:Keep last condition, 1:Return to normal condition
0:For Europe, 1:Foe USA (DAY/NIGHT,...)
0:MCU-250ms, 1:AC-50/60Hz
0:Normal, 1:For service
0:Normal type , 1: Forced AVC type
NT2/NT3/PAL2/PAL3/NT4/PAL4
HD1/HD4/HD5/HD6/HD7/HD8
HD2/HD3/HD9/HD10
MAIN
MAIN
SUB
SUB
MAIN
MAIN
SUB
SUB
MAIN
MAIN
SUB
SUB
Panel life -Extend1
Panel life -Extend1
Panel life -Extend1
Panel life -Extend2
Panel life -Extend2
Panel life -Extend2
RF/Multi
NT1-except RF/PAL1-except RF
HD
NT2,3,4/PAL2,3,4
480i/576i
480p/576p
1080i_50
1080i_60/720p
480i/576i
480p/576p
1080i_50
1080i_60/720p
MAIN
MAIN
Sub
Sub
MAIN
MAIN
SUB
SUB
MAIN
MAIN
0:Disenable, 1:Enable
10
Downloaded From TV-Manual.com Manuals
Maximum
Formatter VIDEO TUNER LCD
Default
Value
PWB
PWB
PWB PANEL
125
255
65535
1
1
2
2
63
63
2
15
15
254
254
254
254
2
1
1
15
1
18
18
254
1
237
15
15
1
15
3
15
3
1
7
1
1
1
1
1
1
15
3
15
3
7
7
7
15
3
15
3
15
3
15
3
15
3
15
3
1
15
127
127
127
127
127
127
1
15
15
15
15
3
3
3
3
63
63
63
63
10
10
10
10
15
15
15
15
3
3
1
2
0
1
1
50
20
0
8
8
137
137
127
127
1
0
0
3
0
2
2
90
0
235
7
7
0
8
2
9
2
1
0
0
0
0
0
0
0
8
2
9
2
2
2
2
12
2
10
2
10
2
8
2
9
2
8
2
1
5
93
10
1
63
6
1
0
2
2
1
10
2
2
2
2
20
20
20
20
4
4
1
1
10
10
8
8
2
2
1
2
O
28LD5200E (PW1L)
O : Should be adjusted
: Should be followed previous data
Changed Component
Function
ADJ.
No.
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
Adjustment Items
CM_THRESHOLD (D15-D8)
CM_THRESHOLD (D7 -D0)
Sharpness Gain(RF M)
Sharpness Gain(RF M)
Sharpness f0 (RF M)
Sharpness f0 (RF M)
Counting value of 2ms Sync.Detect
Counting value of 2ms Sync.Detect
TB1274 Read Data(00h)
TB1274 Read Data(01h)
TB1274 Read Data(00h)
TB1274 Read Data(01h)
MSP Read Data (CNTROL ) (D15-D8 )
MSP Read Data (CNTROL ) (D7 -D0 )
MSP Read Data (STANDARD_RES) (D15-D8 )
MSP Read Data (STANDARD_RES) (D7 -D0 )
MSP Read Data (STATUS ) (D15-D8 )
MSP Read Data (STATUS ) (D7 -D0 )
TA1370G Read Data(00h)
TA1370G Read Data(01h)
TA1370G Read Data(00h)
TA1370G Read Data(01h)
uPD64084 Read Data(00H)
uPD64084 Read Data(01h)
Language (Refer to below)
Hotel Mode(0:No,1:Yes)
Analog Data (0:Keep EEPROM,1:Not Keep to EEPROM)
Maximum Volume Limit
Power Mode(0:Last mode, 1:Pos1, 2:V1, 3:V2, 4:V3, 5:V4)
Channel Select(0:CCIR, 1:CHINA)
Auto_sound 4.5 (0:Korea, 1:BTSC, 2:Japan)
T/TEXT(0: None, 1:Yes)
TEXT Language
IIC BUS Data/Clock Open(0:Close, 1:Open)
Channel Preset(0:VESTEL, 1:GIFU, 2:HAMA, 3:HFDM,4:AUSTRALIA)
Detect and Displsy Tele-Cinema (0:normal 1:Tele Cinema)
V FREQ 60Hz Force (0:None, 1:Yes)
COLOR SYSTEM CONTROL-MODE(0:BW, 2:3.58NTSC, 3:4.43NTSC,...)
COLOR SYSTEM CONTROL-MODE(0:BW, 2:3.58NTSC, 3:4.43NTSC,...)
Horizontal Filter SW [HHPF0]
Enhancer Gain [HHPF1]
Enhancer Gain [HHPF2]
Horizontal Coring Level(Enhancer Gain) AS[HECOR0_PO]
Horizontal Coring Level(Enhancer Gain) AS[HECOR1_PO]
Horizontal Coring Level(Enhancer Gain) [HECOR2_PO]
Horizontal Coring Level(Enhancer Gain) [HECOR3_PO]
Horizontal Coring Level(Enhancer Gain) [HECOR4_PO]
Horizontal Coring Level(Enhancer Gain) [HECOR5_PO]
Horizontal Coring Level(Enhancer Gain) [HECOR6_PO]
Horizontal Coring Level(Enhancer Gain) [HECORPC_PO]
Horizontal Coring Level(Enhancer Gain) EU[HECORE_PO]
Vertical Coring Level(Enhancer Gain) AS[VECOR0_PO]
Vertical Coring Level(Enhancer Gain) AS[VECOR1_PO]
Vertical Coring Level(Enhancer Gain) [VECOR2_PO]
Vertical Coring Level(Enhancer Gain) [VECOR3_PO]
Vertical Coring Level(Enhancer Gain) [VECOR4_PO]
Vertical Coring Level(Enhancer Gain) [VECOR5_PO]
Vertical Coring Level(Enhancer Gain) [VECOR6_PO]
Vertical Coring Level(Enhancer Gain) [VECORPC_PO]
Vertical Coring Level(Enhancer Gain) EU[VECORE_PO]
Horizontal Coring Level(Enhancer Gain) AS[HECOR0_P1]
Horizontal Coring Level(Enhancer Gain) AS[HECOR0_P2]
Horizontal Coring Level(Enhancer Gain) [HECOR0_P3]
Horizontal Coring Level(Enhancer Gain) [HECOR0_P4]
Horizontal Coring Level(Enhancer Gain) [HECOR0_P5]
Horizontal Coring Level(Enhancer Gain) [HECOR0_P6]
Horizontal Coring Level(Enhancer Gain) [HECOR0_P7]
Horizontal Coring Level(Enhancer Gain) [HECORPC_P1]
Horizontal Coring Level(Enhancer Gain) EU[HECORE_P1]
Vertical Coring Level(Enhancer Gain) AS[VECOR0_P1]
Vertical Coring Level(Enhancer Gain) AS[VECOR0_P2]
Vertical Coring Level(Enhancer Gain) [VECOR0_P3]
Vertical Coring Level(Enhancer Gain) [VECOR0_P4]
Vertical Coring Level(Enhancer Gain) [VECOR0_P5]
Vertical Coring Level(Enhancer Gain) [VECOR0_P6]
Vertical Coring Level(Enhancer Gain) [VECOR0_P7]
Vertical Coring Level(Enhancer Gain) [VECORPC_P1]
Vertical Coring Level(Enhancer Gain) EU[VECORE_P1]
YFRNR Input Gain (Main) 2pictures [MYNRG0]
*&065%*&2#.
UWD=/;04)?
RKEVWTGU=/;04)?
[MYNRG3]
YFRNR Input Gain(Sub) [YCNRG0]
[YCNRG1]
CFRNR Input Gain 8Main) 2pictures [MCNRG0]
<HD-NTSC,HD-PAL(Sub) [MCNRG1]
[MCNRG2]
[MCNRG3]
CFRNR Input Gain [SCNRG0]
[SCNRG1]
YFRNR Transition Level [MYNRP0]
[MYNRP5]
[MYNRP6]
[MYNRP7]
Mode
MAIN
Sub
Main
SUB
MAIN
SUB
Main
Main
Sub
Sub
Video board side
Video board side
Formater side
Formater side
Main/Sub
Main
Sub
NTSC
PAL
HD
NT1-RF
PAL1-RF/Multi
NT1-Video
PAL1-Video
NT2/NT3/NT4/PAL2/PAL3/PAL4
HD2/HD3/HD9/HD10
HD1/HD4/HD5/HD6/HD7/HD8
PC
PAL1-RF/multi
NT1-RF
PAL1-RF/multi
NT1-Video
PAL1-Video
NT2/NT3/NT4/PAL2/PAL3/PAL4
HD2/HD3/HD9/HD10
HD1/HD4/HD5/HD6/HD7/HD8
PC
PAL1-RF/multi
NT1-RF
PAL1-RF/multi
NT1-Video
PAL1-Video
NT2/NT3/NT4/PAL2/PAL3/PAL4
HD2/HD3/HD9/HD10
HD1/HD4/HD5/HD6/HD7/HD8
PC
PAL1-RF/multi
NT1-RF
PAL1-RF/multi
NT1-Video
PAL1-Video
NT2/NT3/NT4/PAL2/PAL3/PAL4
HD2/HD3/HD9/HD10
HD1/HD4/HD5/HD6/HD7/HD8
PC
PAL1-RF/multi
except HD-HD
HD-HD
NT-*/PAL-*
HD-*
2pictures
4pictures/12pictures
except HD-HD
HD-HD
HD-*
2pictures
4pictures/12pictures
NT1/PAL1/multi
NT1/PAL1-Video
NT2/NT3/NT4/PAL2/PAL3/PAL4
HD2/HD3/HD9/HD10
11
Downloaded From TV-Manual.com Manuals
Maximum
Formatter VIDEO TUNER LCD
Default
Value
PWB
PWB
PWB PANEL
254
254
15
15
3
3
6
1
1
63
5
1
2
1
7
1
4
1
1
1
1
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
0
36
11
11
2
2
0
0
0
63
0
0
0
1
0
0
1
0
0
0
0
1
1
1
1
0
1
0
1
1
1
1
1
1
0
0
0
0
0
1
1
0
1
0
1
1
1
1
1
1
1
1
1
15
0
0
0
1
4
1
4
4
1
3
4
4
4
3
4
1
0
0
0
28LD5200E (PW1L)
O : Should be adjusted
: Should be followed previous data
Changed Component
Function
ADJ.
No.
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
Adjustment Items
[MYNRP8]
YFRNR Transition Level (Main/Sub) [MCNRP0]
[MCNRP5]
[MCNRP6]
[MCNRP7]
[MCNRP8]
Vertical Enhancer [YVEG0_P0]
[YVEG1_P0]
[YVEG2_P0]
AS[YVEG3_P0]
EU[YVEG0_E_P0]
Vertical RGB Gain For Y/G [YVDSBG0_P0]
[YVDSBG1_P0]
[YVDSBG2_P0]
Vertical RGB Coring For Y/G [YVDSBG0_P0]
[YVDSBG1_P0]
Vertical Enhancer Clip for Y/G [YVECLP0_P0]
[YVECLP1_P0]
Vertical Clip Offset level [YVECLP0_P0]
[YVECLP1_P0]
Vertical Non Linear Peaking for Y/G [YVNLP0_P0]
[YVNLP1_P0]
Horizontal HPF Peak Freq SW for Y/G [YHHPF0_P0]
[YHHPF1_P0]
[YHHPF2_P0]
Horizontal Enhancer Gain for Y/G [YHEG0_P0]
[YHEG1_P0]
[YHEG2_P0]
AS[YHEG3_P0]
EU[YHEG0_E_P0]
Hrozontal DSB Gain for Y/G [YHDSBG0_P0]
[YHDSBG1_P0]
[YHDSBG2_P0]
Horizontal DSB Coring for Y/G [YHDSBC0_P0]
[YHDSBC1_P0]
Horizontal Enhancer Clip for Y/G [YHECLP0_P0]
[YHECLP1_P0]
Horizontal Clip Offset Level for Y/G AS[YHECLPL0_P0]
AS[YHECLPL1_P0]
[YHECLPL2_P0]
EU[YHECLPL0_E_P0]
EU[YHECLPL1_E_P0]
Horizontal Non Linear Peaking for Y/G [YHNLP0_P0]
[YHNLP1_P0]
Coring Amplitude for Y/G [YCOR0_PO]
[YCOR1_PO]
[YCOR2_PO]
[YCOR3_PO]
[YCOR4_PO]
Vertical Enhancer Gain for Y/G [YVEG0_P1]
[YVEG1_P1]
[YVEG2_P1]
AS[YVEG3_P1]
EU[YVEG0_E_P1]
Vertical DSB Gain for Y/G [YVDSBG0_P1]
[YVDSBG1_P1]
[YVDSBG2_P1]
Vertical DSB Coring for Y/G [YVDSBC0_P1]
[YVDSBC1_P1]
Vertical Enhancer Clip for Y/G [YVECLP0_P1]
[YVECLP1_P1]
Vertical Clip Offset Level for Y/G [YVECLP0_P1]
[YVECLP1_P1]
Vertical Non Linear Peaking for Y/G [YVNLP0_P1]
[YVNLP1_P1]
Horizontal HPF Pead Freq SW for Y/G [YHHPF0_P1]
[YHHPF1_P1]
[YHHPF2_P1]
Horizontal Enhancer Gain for Y/G [YHEG0_P1]
[YHEG1_P1]
[YHEG2_P1]
AS[YHEG3_P1]
EU[YHEG0_E_P1]
Horizontal DSB Gain for Y/G [YHDSBG0_P1]
[YHDSBG1_P1]
[YHDSBG2_P1]
Horizontal DSB Coaring for Y/G [YHDSBC0_P1]
[YHDSBC1_P1]
Horizontal Enhancer Clip for Y/G [YHDSBC0_P1]
[YHDSBC1_P1]
Horizontal Clip Offset Level for Y/G AS[YHCLPL0_P1]
AS[YHCLPL1_P1]
[YHECLPL2_P1]
EU[YHECLPL0_E_P1]
EU[YHECLPL1_E_P1]
Horizontal Non Linear Peaking for Y/G [YHNLP0_P1]
[YHNLP1_P1]
Coring Amplitude for Y/G [YC0R0_P1]
[YC0R1_P1]
[YC0R2_P1]
[YC0R3_P1]
[YC0R4_P1]
Vertical enhancer Gain for B-Y/B, R-Y/R [CVEG0]
[CVEG1]
Mode
HD1/HD4/HD5/HD6/HD7/HD8
NT1/PAL1/multi
NT1/PAL1-video
NT2/NT3/NT4/PAL2/PAL3/PAL4
HD2/HD3/HD9/HD10
HD1/HD4/HD5/HD6/HD7/HD8
NTSC/PAL(-except RF)
HD2/HD3/HD9/HD10
HD1/HD4/HD5/HD6/HD7/HD8
PAL1-RF/multi
PAL1-RF/multi
NTSC/PAL/multi
HD2/HD3/HD9/HD10
HD1/HD4/HD5/HD6/HD7/HD8
NTSC/PAL/multi
HD
NTSC/PAL/multi
HD
NTSC/PAL/multi
HD
NTSC/PAL/multi
HD
NTSC/PAL/multi
HD2/HD3/HD9/HD10
HD1/HD4/HD5/HD6/HD7/HD8
NTSC/PAL(except -RF)
HD2/HD3/HD9/HD10
HD1/HD4/HD5/HD6/HD7/HD8
PAL1-RF/multi
PAL1-RF/multi
NTSC/PAL/multi
HD2/HD3/HD9/HD10
HD1/HD4/HD5/HD6/HD7/HD8
NTSC/PAL/multi
HD
NTSC/PAL/multi
HD
RF/multi
NT1-except RF/PAL1-except RF
HD
RF/multi
NT1-except RF/PAL1-except RF
NTSC/PAL/multi
HD
NT1-RF/PAL1-RF/multi
NT1-Video/PAL1-Video
NT2/NT3/NT4/PAL2/PAL3/PAL4
HD2/HD3/HD9/HD10
HD1/HD4/HD5/HD6/HD7/HD8
NTSC/PAL(-RFએᄖ)
HD2/HD3/HD9/HD10
HD1/HD4/HD5/HD6/HD7/HD8
PAL1-RF/multi
PAL1-RF/multi
NTSC/PAL/multi
HD2/HD3/HD9/HD10
HD1/HD4/HD5/HD6/HD7/HD8
NTSC/PAL/multi
HD
NTSC/PAL/multi
HD
NTSC/PAL/multi
HD
NTSC/PAL/multi
HD
NTSC/PAL/multi
HD2/HD3/HD9/HD10
HD1/HD4/HD5/HD6/HD7/HD8
NTSC/PAL(except-RF)
HD2/HD3/HD9/HD10
HD1/HD4/HD5/HD6/HD7/HD8
PAL1-RF/multi
PAL1-RF/multi
NTSC/PAL/multi
HD2/HD3/HD9/HD10
HD1/HD4/HD5/HD6/HD7/HD8
NTSC/PAL/multi
HD
NTSC/PAL/multi
HD
RF/multi
except NT1-RF/PAL1-except RF
HD
RF/multi
NT1-except RF/PAL1-except RF
NTSC/PAL/multi
HD
NT1-RF/PAL1-RF/multi
NT1-video/PAL1-video
NT2/NT3/NT4/PAL2/PAL3/PAL4
HD2/HD3/HD9/HD10
HD1/HD4/HD5/HD6/HD7/HD8
NTSC/PAL/multi
HD
12
Downloaded From TV-Manual.com Manuals
Maximum
Formatter VIDEO TUNER LCD
Default
Value
PWB
PWB
PWB PANEL
7
7
7
7
7
7
15
15
15
15
15
3
3
3
7
7
1
1
15
15
63
63
3
3
3
15
15
15
15
15
3
3
3
7
7
1
1
15
15
15
15
15
63
63
7
7
7
7
7
15
15
15
15
15
3
3
3
7
7
1
1
15
15
63
63
3
3
3
15
15
15
15
15
3
3
3
7
7
1
1
15
15
15
15
15
63
63
7
7
7
7
7
15
15
0
2
2
2
2
0
8
12
8
8
8
0
0
0
0
3
1
1
7
1
0
0
2
1
1
15
15
0
15
15
3
0
0
1
0
0
0
2
2
1
4
4
0
0
7
5
3
1
1
15
4
15
15
15
3
0
2
7
0
1
0
15
8
0
0
2
2
2
15
15
15
15
15
2
0
2
7
7
0
0
4
4
5
4
4
0
0
7
4
3
2
4
15
9
28LD5200E (PW1L)
O : Should be adjusted
: Should be followed previous data
Changed Component
Function
ADJ.
No.
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
Adjustment Items
DSB Gain of Vertical for B-Y/B,R-Y/R [CVDSBG0]
[CVDSBG1]
DSB coring of Vertical for B-Y/B,R-Y/R [CVDSBC0]
[CVDSBC1]
Vertical enhancer Clip for B-Y/B, R-Y/R [CVECLP0]
[CVECLP1]
Horizontal HPF Peak Freq. SW for B-Y/B, R-Y/R [CHHPF0]
[CHHPF1]
Horizontal Enhancer Gain for B-Y/B, R-Y/R [CHEG0]
[CHEG1]
Horizontal DSB Gain for B-Y/B, R-Y/R [CHDSBG0]
[CHDSBG1]
Horizontal DSB Coring for B-Y/B, R-Y/R [CHDSBC0]
[CHDSBC1]
Horizontal Enhancer Clip fo B-Y/B, R-Y/R [CHECLP0]
[CHECLP1]
Coring Amplitude for B-Y/B, R-Y/R [CC0R0]
[CC0R1]
B-Y Clamp offset [Except D Sub Component]
R-Y Clamp offset [Except D Sub Component]
B-Y Clamp offset [Except D Sub Component]
R-Y Clamp offset [Except D Sub Component]
B-Y Clamp offset [Except D Sub Component]
R-Y Clamp offset [Except D Sub Component]
B-Y Clamp offset [D Sub Component]
R-Y Clamp offset [D Sub Component]
B-Y Clamp offset [D Sub Component]
R-Y Clamp offset [D Sub Component]
B-Y Clamp offset [D Sub Component]
R-Y Clamp offset [D Sub Component]
B-Y Clamp offset [DVI-STB]
R-Y Clamp offset [DVI-STB]
B-Y Clamp offset [DVI-STB]
R-Y Clamp offset [DVI-STB]
B-Y Clamp offset [DVI-STB]
R-Y Clamp offset [DVI-STB]
Y OUT LEVEL M (4.5) For Asia
Y OUT LEVEL B/G (5.5) For Asia
Y OUT LEVEL D/K (6.5) For Asia
Y OUT LEVEL I (6.0) For Asia
Y OUT LEVEL B/G (5.5) For Europe
Y OUT LEVEL D/K (6.5) For Europe
Y OUT LEVEL I (6.0) For Europe
Y OUT LEVEL L (6.5) For Europe
Y OUT LEVEL L' (6.1) For Europe
Y OUT LEVEL M (4.5) For US
C OUT LEVEL M (4.5) For Asia
C OUT LEVEL B/G (5.5) For Asia
C OUT LEVEL D/K (6.5) For Asia
C OUT LEVEL I (6.0) For Asia
C OUT LEVEL B/G (5.5) For Europe
C OUT LEVEL D/K (6.5) For Europe
C OUT LEVEL I (6.0) For Europe
C OUT LEVEL L (6.5) For Europe
C OUT LEVEL L' (6.1) For Europe
C OUT LEVEL M (4.5) For US
Y OUT LEVEL M (4.5) For Asia
Y OUT LEVEL B/G (5.5) For Asia
Y OUT LEVEL D/K (6.5) For Asia
Y OUT LEVEL I (6.0) For Asia
Y OUT LEVEL B/G (5.5) For Europe
Y OUT LEVEL D/K (6.5) For Europe
Y OUT LEVEL I (6.0) For Europe
Y OUT LEVEL L (6.5) For Europe
Y OUT LEVEL L' (6.1) For Europe
Y OUT LEVEL M (4.5) For US
C OUT LEVEL M (4.5) For Asia
C OUT LEVEL B/G (5.5) For Asia
C OUT LEVEL D/K (6.5) For Asia
C OUT LEVEL I (6.0) For Asia
C OUT LEVEL B/G (5.5) For Europe
C OUT LEVEL D/K (6.5) For Europe
C OUT LEVEL I (6.0) For Europe
C OUT LEVEL L (6.5) For Europe
C OUT LEVEL L' (6.1) For Europe
C OUT LEVEL M (4.5) For US
Contrast Center (CM) ((Contrast Offset (CM) for only WVGA& LCD model))
Contrast Center (CM) ((Contrast Offset (CM) for only WVGA& LCD model))
Contrast Center (CM) ((Contrast Offset (CM) for only WVGA& LCD model))
Contrast Center (CM) ((Contrast Offset (CM) for only WVGA& LCD model))
Contrast Center (CM) ((Contrast Offset (CM) for only WVGA& LCD model))
Contrast Center (CM) ((Contrast Offset (CM) for only WVGA& LCD model))
Brightness Center (CM)
Brightness Center (CM)
Brightness Center (CM)
Brightness Center (CM)
Brightness Center Offset
Color Center (CM)
Color Center (CM)
Color Center (CM)
Color Center (CM)
Color Center (CM)
Tint Center (CM)
Tint Center (CM)
Mode
NTSC/PAL/multi
HD
NTSC/PAL/multi
HD
NTSC/PAL/multi
HD
NTSC/PAL/multi
HD
NTSC/PAL/multi
HD
NTSC/PAL/Multi Picture
HD
NTSC/PAL/Multi Picture
HD
NTSC/PAL/Multi Picture
HD
NTSC/PAL/Multi Picture
HD
NT1/2/3,HD2/3,PAL1/2/3,HD9/10
NT1/2/3,HD2/3,PAL1/2/3,HD9/10
HD1/4,HD7/8
HD1/4,HD7/8
HD5/6
HD5/6
NT1/2/3,HD2/3,PAL1/2/3,HD9/10
NT1/2/3,HD2/3,PAL1/2/3,HD9/10
HD1/4,HD7/8
HD1/4,HD7/8
HD5/6
HD5/6
480i/576i/480p/576p/VGA
480i/576i/480p/576p/VGA
1080i-50/1080i-60
1080i-50/1080i-60
720p-60
720p-60
Main
Main
Main
Main
Main
Main
Main
Main
Main
Main
Main
Main
Main
Main
Main
Main
Main
Main
Main
Main
Sub
Sub
Sub
Sub
Sub
Sub
Sub
Sub
Sub
Sub
Sub
Sub
Sub
Sub
Sub
Sub
Sub
Sub
Sub
Sub
DVI-PC
DVI-STB (With Setup)
DVI-STB (Without Setup)
DSUB-RGB
Expand DSUB-RGB (Reserved)
DSUB-COMP
DVI-PC
DVI-STB
DSUB-RGB
Expand DSUB-RGB (Reserved)
DSUB-COMP
DVI-PC
DVI-STB (480i/576i/480p/576p)
DVI-STB (720p-60/1080i-60/1080i-50
DVI-STB (VGA)
DSUB-RGB
DVI-PC
DVI-STB (480i/576i/480p/576p)
13
Downloaded From TV-Manual.com Manuals
Maximum
Formatter VIDEO TUNER LCD
Default
Value
PWB
PWB
PWB PANEL
3
3
7
7
1
1
3
3
15
15
3
3
7
7
1
1
7
7
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
254
254
254
254
254
254
254
254
254
254
254
127
127
127
127
127
254
254
0
0
0
0
0
0
2
2
15
9
0
0
0
0
0
0
1
1
128
128
128
128
128
128
128
128
128
128
128
128
128
128
128
128
128
128
15
13
16
14
13
16
19
13
12
13
7
13
13
13
8
8
3
8
8
13
14
13
15
13
13
16
20
13
13
13
7
13
13
13
13
13
13
13
13
13
128
149
128
128
128
137
128
128
128
128
127
64
62
62
62
64
128
128
28LD5200E (PW1L)
O : Should be adjusted
: Should be followed previous data
Changed Component
Function
ADJ.
No.
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
Adjustment Items
Tint Center (CM)
Tint Center (CM)
Tint Center (CM)
Center of Sharpness (HV Enhance Gain for Y)
Center of Sharpness (HV Enhance Gain for Y)
Center of Sharpness (HV Enhance Gain for Y)
Center of Sharpness (HV Enhance Gain for Y)
Center of Sharpness (HV Enhance Gain for Y)
DVI-STB Setup 0:None VGA/Others Yes, 1:All none 2:All have
HSYNC De-Jitter 0:Low (Disabled), 1:(High (Enabled)
HSYNC De-Jitter 0:Low (Disabled), 1:(High (Enabled)
HSYNC De-Jitter 0:Low (Disabled), 1:(High (Enabled)
Offset level of Horizontal CLIP for Y/G AS[YHECLPL3_P0]
EU[YHECLPL3_E_P0]
Offset level of Horizontal CLIP for Y/G AS[YHCLPL3_P1]
EU[YHECLPL3_E_P1]
Y_DL (4.5MHz) For US
Y_DL (4.6MHz) For US
Y_DL (5.5MHz PAL/NTSC4.43) For Europe
Y_DL (5.5MHz SECAM) For Europe
Y_DL (6.0PAL/NTSC4.43) For Europe
Y_DL (6.0SECAM) For Europe
Y_DL (5.5MHz PAL/NTSC4.43) For Europe
Y_DL (5.5MHz SECAM) For Europe
Y_DL (6.0PAL/NTSC4.43) For Europe
Y_DL (6.0SECAM) For Europe
Y_DL (6.5MHz PAL/NTSC4.43) For Europe
Y_DL (6.5MHz SECAM) For Europe
Y_DL (6.5MHz PAL/NTSC4.43) For Europe
Y_DL (6.5MHz SECAM) For Europe
Center of Sharpness (HV Enhancer Gain for Y) For Asia/US
Center of Sharpness (HV Enhancer Gain for Y) For Asia/US
Center of Sharpness (HV Enhancer Gain for Y) For Asia/US
Center of Sharpness (HV Enhancer Gain for Y) For Asia/US
Center of Sharpness (HV Enhancer Gain for Y) For Asia/US
Center of Sharpness (HV Enhancer Gain for Y) For Asia/US
Center of Sharpness (HV Enhancer Gain for Y) For Asia/US
Contrast mode<Dynamic> SW (TV) 0:Dynamic 1:Dynamic+Auto
V detection(FORMATTER PWB) 0:out of range 128: NO V (or out of spec) 255interrupt
H detection(FORMATTER PWB) 0:out of range 128: NO V (or out of spec) 255interrupt
V detection (VIDEO PWB) 0:out of range 128:NO V 255 interrupt
H detection (VIDEO PWB) 0:out of range 128:NO V 255 interrupt
Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 55V
Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 55V
Dispersion Time of Sustain current 0: 2 Times, 1: 4 times
SMPLING
POLLING
START
TIMEOUT
STATUS
CCD-HP
CCD-CLK
Sharpness Gain
Sharpness EQ
Sharpness f0
Cb Offset1
Cr Offset1
Y out level
C out level
Sharpness Gain
Sharpness EQ
Sharpness f0
Cb Offset1
Cr Offset1
Y out level
C out level
Offset value of adjusted TINT for impact to No.42-45
Use item No.724 0:No , 1:Yes
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Free
Gain adjustment of RGB amplifier (FLAON)
Gain adjustment of RGB amplifier
Automatic White Peak Adj.
Automatic White Peak Adj.
EEPROM Initialize(0:No, 1:Yes)
Enter to service menu of sub mi-con
Mode
DVI-STB (720p-60/1080i-60/1080i-50
DVI-STB (VGA)
DSUB-RGB
DVI-STB (480i/576i)
DVI-STB (480p/576p)
DVI-STB (720p-60)
DVI-STB (1080i-60/1080i-50)
DVI-STB (VGA)
DVI-STB mode
DVI-PC
DVI-STB
AVC
NT2~4/PAL2~4
NT2~4/PAL2~4
NT2~4/PAL2~4
NT2~4/PAL2~4
Main
Sub
Main
Main
Main
Main
Sub
Sub
Sub
Sub
Main
Main
Sub
Sub
TV
VIDEO
HD5/HD6
HD1/HD4/HD7/HD8
HD2/HD3/HD9/HD10
NT2/NT3/PAL2/PAL3/NT4/PAL4
TEXT(2pictures)
TV
50/60Hz
15/28/31/33/45kHz
50/60Hz
15/28/31/33/45kHz
50Hz[Natural/Night] mode
60Hz[Natural/Night] mode
For PC-Movie mode
For CCD
For CCD
For CCD
For CCD
For CCD
For CCD
For CCD
For Main 480i/576i
For Main 480i/576i
For Main 480i/576i
For Main 480i/576i
For Main 480i/576i
For Main 480i/576i
For Main 480i/576i
For Sub 480i/576i
For Sub 480i/576i
For Sub 480i/576i
For Sub 480i/576i
For Sub 480i/576i
For Sub 480i/576i
For Sub 480i/576i
For COMPAL factory
For COMPAL factory
Main
Sub
Single Picture mode
Multi Picture mode
14
Downloaded From TV-Manual.com Manuals
Maximum
Formatter VIDEO TUNER LCD
Default
Value
PWB
PWB
PWB PANEL
254
254
254
31
31
31
31
31
2
1
1
1
15
15
15
15
10
10
10
10
10
10
10
10
10
10
10
10
10
10
31
31
31
31
31
31
31
1
255
255
255
255
2
2
1
255
255
7
30
7
79
79
15
3
3
15
15
63
63
15
3
3
15
15
63
63
20
1
1
-
128
128
128
14
10
6
10
10
0
0
0
0
10
10
15
15
7
7
4
1
8
5
2
0
4
0
5
5
2
0
15
15
6
10
10
14
15
1
1
1
1
0
15
2
5
2
40
57
10
1
1
8
8
15
15
10
1
1
8
8
15
15
11
0
0
-
O
O
O
O
O
O
O
O
28LD5200E (PW1L)
The Expression of input signal mode (format)
Video
Input
PAL1: RF, S and Composite of PAL/SECAM
PAL2: Component of PAL (YCBCR)
PAL3: Component of PAL (YPBPR)
PAL4: Component of PAL (YCBCR-SCART)
PAL: PAL1-4
NT1: S and Composite of NTSC
NT2: Component of NTSC (YCBCR)
NT3: Component of NTSC (YPBPR)
NT4: Component of NTSC (YCBCR-SCART)
NTSC: NTSC1-4
HD1-6: Component (shown in the table )
HD7: Component of 1080i/50 (YPBPR)
HD8: Component of 1080i/50 (YCBCR)
HD9: Component of 576p (YPBPR)
HD10: Component of 576p (YCBCR)
HD: HD1-10 of Component
TV: NTSC / HD
PC: PC signal
System
PAL
AV1
AV2
Judgment of
H.Frequency
15.75kHz
(576i)
NTSC
15.75kHz
(480i)
PAL
31.25kHz
(576p)
NTSC
31.50kHz
(480p)
NTSC
45.00kHz
(720p)
PAL
28.125kHz
(1080i)
NTSC
33.75kHz
(1080i)
Video Input
Setup
Auto
SDTV/DVD
HDTV
Auto
SDTV/DVD
HDTV
Auto
SDTV/DVD
HDTV
Auto
SDTV/DVD
HDTV
Auto
SDTV/DVD
HDTV
Auto
SDTV/DVD
HDTV
Auto
SDTV/DVD
HDTV
Mode
PAL2
PAL2
PAL3
NT2
NT2
NT3
HD10
HD10
HD9
HD3
HD3
HD2
HD5
HD6
HD5
HD7
HD8
HD7
HD1
HD4
HD1
Factory Reset
After all of the adjustments of main chassis are finished, perform FACTORY RESET.
Press the SUB-POWER( ) button, INPUT SELECT( ) button and
button at the same time, and hold for
more than 5 seconds.
The unit is set to factory settings.
15
Downloaded From TV-Manual.com Manuals
28LD5200E (PW1L)
Item
AUTOMATIC SIGNAL LEVEL ADJ USTMENT –RGB (1)
Preparation
(1) Input the adjustment signal of VGA (60Hz)
format into RGB2 [D-sub] input terminal.
the adjustment signal
The signal level of black area
should be pedestal level.
This signal must not be inserted
characters etc.
Procedure
(1) Select RGB2 and enter the service adjustment
mode.
(2) Select No.740 “RGB Amp. Gain ADJ.” and press
OK button for more than 2 seconds to start the
adjustment.
It will complete the adjustment after the OSD of
“AUTO MODE” disappeared.
Black White
0.7V
[Note] Never adjust without use of the specified signal.
If that were done by mistake, the picture would become abnormal in black level, contrast and color.
In this case, it will be recovered by re-adjustment in the specified way.
Item
AUTOMATIC SIGNAL LEVEL ADJ USTMENT –RGB (2)
Preparation
(1) Input the adjustment signal of 576p or 480p
format into AV1 input terminal.
the adjustment signal
The signal level of black area
should be pedestal level.
This signal must not be inserted
characters etc.
Black White
Procedure
(1) Select AV1 and enter the service adjustment mode.
(2) Select No.740 “RGB Amp. Gain ADJ.” and press
OK button for more than 2 seconds to start the
adjustment.
It will complete the adjustment after the OSD of
“AUTO MODE” disappeared.
(3) Select No.741 “RGB Amp. Gain ADJ.” and press
OK button for more than 2 seconds to start the
adjustment.
It will complete the adjustment after the OSD of
“AUTO MODE” disappeared.
0.7V
[Note] Never adjust without use of the specified signal.
If that were done by mistake, the picture would become abnormal in black level, contrast and color.
In this case, it will be recovered by re-adjustment in the specified way.
16
Downloaded From TV-Manual.com Manuals
28LD5200E (PW1L)
Item
COLOR TEMPERATURE ADJUSTMENT -VIDEO
Preparation
(1) Set CRT COLOR ANALYZER(CA-210) at the
center of the screen panel.
(2) Input the full-white raster signal to AV1
component terminal and select AV1.
Signal condition
480i component
Video level: 0.56Vp-p
Sync level: 0.286Vp-p
Setup level: 0V
(3) Set the diaplay size to "Full".
Set the Contrast mode of picture menu "Auto".
Set the Picture mode of Picture menu “Dynamic”.
Procedure
[Adjustment of Cool mode]
(1) Enter the service adjustment mode, and confirm that
Adjustment NO 0,1 are set as 230. NO2 is set as 255.
If initial x and y value are larger than specification,
No.0:R drive(cool) will be adjusted(decrease from 230)
No.1:G drive(cool) will be adjusted(decrease from 230)
No.2:B drive(cool) is set as 255
(2) If initial x or y value is smaller than specification.
No2:B drive(cool) will be adjusted(decrease from 255),
until one of x,y is in spec and another value is higher than spec.
(* When both x and y are in spec value, it is end of adjustment )
(3) According to a x and y value, the following adjustment of (3)-1 or (3)-2.
(3)-1 If x value is higher than spec.
No.0:R drive(cool) will be adjusted(decrease from 230)
(3)-2 If y value is 6higher than spec,
No1:G drive(cool) will be adjusted(decrease from 230)
* No.0:R or No.1:Fshould be set as 230
<Specification>
Color Temperature (Cool) for Video
25000K-6MCD x=0.257 0.005 y=0.256 0.005
[Adjustment of Normal mode]
No Adjustment. (11000K)
Adjustment No.3,4 and 5 are set as 230.
[Adjustment of Warm mode]
(4)
Enter the service adjustment mode, and confirm that Adjustment NO.6,7
and 8 are all set as 230.
In factory setting mode
No.8:B drive(warm) will be adjusted(decrease from 230),
until one of x,y is in spec and another value is higher than spec.
(* When both x and y are in spec value, it is end of adjustment )
(5) According to x and y value, the following adjustment of (5)-1 or (5)-2.
(5)-1 If x value is higher than spec.
No.6:R drive(warm) will be adjusted(decrease from 230)
(5)-2 If y value is higher than spec,
No7:G drive(warm) will be adjusted(decrease from 230)
No.6 or No.7:Fshould be set as 230.
<Specification>
Color Temperature (Warm) for Video
7500K x=0.302 0.005 y=0.317 0.005
[Adjustment of Black / White mode]
(6) Enter the service adjustment mode, and confirm Adjustment NO.9,10
and 11 are all set as 230.
In factory setting mode
No.11:B drive(B/W) will be adjusted(decrease from 230),
until one of x,y is in spec and another value is higher than spec.
(* When both x and y are in spec value, it is end of adjustment.)
(7) According to x and y value, the following adjustment of (7)-1 or (7)-2.
(7)-1 If x value is higher than spec.
No.9:R drive(B/W) will be adjusted(decrease from 230)
(7)-2 If y value is higher than spec,
No.10:G drive(B/W) will be adjusted(decrease from 230)
No.9 or No.10:should be set as 230.
<Specification>
Color Temperature (B/W) for Video
5400K x=0.335 0.005 y=0.343 0.005
17
Downloaded From TV-Manual.com Manuals
28LD5200E (PW1L)
Item
COLOR TEMPERATURE ADJUSTMENT -PC
Preparation
Procedure
It is same as color temperature adjustment
data of video.
Write the data which are inside drive No0
to No11 into drive N0.12 to No.23 respectively.
Example. [at VIDEO]
No.0 'data'
No.1 'data'
No.2 'data'
No.10 'data'
No.11 'data'
18
Downloaded From TV-Manual.com Manuals
[at PC]
No.12 'data'
No.13 'data'
No.14 'data'
No.22 'data'
No.23 'data'
28LD5200E (PW1L)
5. Troubleshooting
How to get to Burn-in mode
This mode displays the test patterns of some single color raster in turn. These signals are from built-in generator
of LCD monitor.
Using the front control buttons with the set turned off (standby) can activate this mode.
Press the SUB-POWER( ) button, INPUT SELECT( ) button and VOLUME DOWN( ) button at the same
time, and hold for more than 5 seconds.
The set turns on with single color raster and the OSD of [BURN IN: ON].
To escape from this mode, press the SUB-POWER( ) button, INPUT SELECT( ) button and button at the
same time, and hold for more than 5 seconds. Burn-in mode will be released.
How to recover the remote and front key function
If remote and front key cannot operate after miss set special function by front keys, these functions can recover
by below method.
Press the SUB-POWER( ) button, INPUT SELECT( ) button and
button at the same time, and hold for
more than 5 seconds.
The set turns on the service menu mode.
Select No.175 and data set from [0] to [1].
Or
Press the SUB-POWER( ) button and button at the same time, and hold for more than 5 seconds
19
Downloaded From TV-Manual.com Manuals
28LD5200E (PW1L)
Power cannot be turned on (LED does not light)
Is the input voltage
applied to Power supply unit?
(CN5 [1][3])
No
Yes
AC
inlet
Power
switch
Sub
Power board
Power supply
unit
Are the
voltages applied to
P804 [1][8]pins, P806[1]pin
No
and P808 [1][4][8][12]pins
of Power supply
P804 [1] +5V P808 [1] +30V
unit?
[4] +5V
[8] +6V
[8] +12V
Yes
[12] +10V
P806 [1] +12V
Joint / Formatter PWB
Is the voltage
applied to P804[3]pin of Power
supply unit high?
Yes(high)
Picture is displayed. But no sound
P804 [3]
Power GO
Check
Speaker terminal and
Speaker cord.
Unlocked
No(low)
Is the voltage
applied to P804[5]pin of Power
supply unit high?
Yes(high)
No(low)
Check
Locked
No sound
Power
supply unit
Joint / Formatter PWB
Are the voltages
applied to EAJ1[1][5]pins
of the Audio PWB?
Yes
Are the signals
applied to EAF1[1][3]pins
of the Audio PWB?
Yes
No
[1] +5V
[5] +12V
[3] GND
Are the voltage
applied to EAJ1[1][5]pins?
(When EAJ1 is
disconnected.)
Yes
Audio PWB
Formatter PWB or
Video PWB
No
Yes
Audio PWB
Speaker
20
Downloaded From TV-Manual.com Manuals
No
No
[1] L ch
[3] R ch
[2] GND
Are there signals
on Speaker Terminals?
P804 [5]
Power OFF
Power supply
unit
28LD5200E (PW1L)
Picture is not displayed (LED is lighting)
red
Is the LED red or
green/orange?
green/orange
Is Voltage applied
to P804[1]pin of the Power
supply unit?
Yes
Is it the power
saving mode?
Yes
[1] +5V
No
Input signal Cable
or Formatter PWB
Is Voltage applied
to EJF1[3]pin of the
Joint PWB?
Yes
[3] +5V
No
Power supply
unit
No
Joint PWB
Formatter PWB
Yes
Is backlight lighting?
No
Is the voltage of
EFJ1[1]pin, EFJ2[1][2]pins applied
to of the Formatter
PWB?
Yes
Is the voltage of
P802[5]pin on the Power
supply unit high?
Is the voltage of
EFJ2[5][6][9][10]pins applied
to of the Formatter
PWB?
No(low)
Yes
Yes(high)
Is the voltage of
P804[1][2][3][4]pin on the
Power supply unit 16V?
Yes
Power supply unit
or
Formatter PWB
No
EFJ2
[5] +3.3V [9] +1.8V
[6] +3.3V [10] +1.8V
Is the voltage of
EFP2[1][2]pins on the Formatter
PWB 12V?
Yes
Power supply
unit
Formatter PWB
or
Panel Module
Inverter unit
21
Downloaded From TV-Manual.com Manuals
EFJ2
EFJ1
[1] +10V [1] +6V
[2] +6V
No
Power supply
unit
No
Joint PWB
No
Power supply
unit
28LD5200E (PW1L)
6. Self-Diagnosis Function
Signal circuit check mode: It indicates the check result on some points of the signal circuit and the history of them with On-Screen Display (OSD).
Signal circuit self-diagnosis function
This function is for the failure of the signal circuit, for example the phenomenon as below:
"Sometimes power turns off abnormally." "Sometimes picture disappears abnormally."
To enter to this Self-Diagnosis mode, follow the next steps:
Preparation:
1) The Power Cord should be connected to AC line and the Main Power switch should be turned on.
2) Turn the power off by the SUB-POWER( ) button of the monitor or the remote control.
Procedure:
1)
2)
3)
4)
Press the SUB-POWER( ) button and button on the bottom of the monitor at the same time, and keep it for more than 5 seconds after the power turned on.
The monitor will be turned on, and it will display On-Screen Display of the Self-check result and the failure history as below.
Any operation would cancel the Self -Diagnosis mode.
The following table shows the OSD symbols and contents of failure PWB in which failure most probably would be allocated according to the number of blinks.
Check result
Check item
[OSD]
Self Check
H11: OK
H15: OK
H16: OK
H31: OK
H32: OK
H33: OK
F63
F63
---
---
Self check result area
Failure history area
---
Latest error code
Code
stored up in
Self checking
failure history
item
C10(*
(
H11 *
Problem
Phenomenon
No sync. (Snow noise)
Tuner problem
Cause
OSD of “ ! Check Antenna ”
No connection of ANT cable
appears.
Preset tuning is not yet
Cannot receive the main
Communication error of U101
signal from antenna
H15
Composite video SW IC
Cannot receive picture and
problem
audio
Component video SW IC
No component picture
problem
Cannot change input mode
Communication error of I201
Cannot change input mode
H16
H31
H32
Communication error of I202
Color demodulator IC
Abnormal color
problem
Dark picture
Communication error of I501
Sync. separator IC
Unsynchronized picture
Communication error of I601
3D Y/C separator IC
Abnormal color
Communication error of I302
problem
Dark picture / No picture
problem
H33
H71(*
T/Text IC problem
No T/Text
Communication error of IT01
No picture
H72(*
Sound MPX IC problem
No sound from antenna
Communication error of IN01
Cannot change MPX
sound
F63
2
I C-bus latch problem
Cannot store setting data
SCL3/SDA3 latched up
(Ex. Channel, Volume etc.)
*) This code is no meaning for the models except 32/42PD5000TA because those are without tuner circuit.
If you clear history of failure, make FACTORY RESET: enter the factory setting mode; press the SUB-POWER( )
button, INPUT SELECT( ) button and button on the bottom of the monitor at the same time. And keep it for
more than 5 seconds after the power turned on.
22
Downloaded From TV-Manual.com Manuals
THE UPDATED PARTS LIST
FOR THIS MODEL IS
AVAILABLE ON ESTA
23
Downloaded From TV-Manual.com Manuals
28LD5200E (PW1L)
8. Block diagram
Block diagram 1/2
INVERTER
Back light
LCD Panel Module
Inverter Power
AC100V
-240V
Power Unit
(Main Power Circuit)
Noise
Filter
Main Power SW
TACT SW PWB
Signal Power
Audio Power Supply
Remote
Control
Speaker x2
LED PWB
Formatter PWB
Digital RGB
DVI
Differential
signal
TMDS
(RECEIVER)
OSC
16MHz
CPU
(Main)
CPU
(Sub)
DAC
LVDS
Transmitter
Digital
Audio Amp
RGBHV (Digital)
FC4
D-SUB15P
Audio
Processing
Audio Signal
Audio Signal Processing
Unit
VIDEO PWB
AUDIO
AV1
AV2
AV3
AV4
AUDIO
SELECT
VIDEO
SELECT
Tuner PWB
Tuner
FE
VIDEO AV1
AV2
AV3
AV4
VIDEO CROMA
TELE TEXT
3D/3L COMB
VIDEO OUT
24
Downloaded From TV-Manual.com Manuals
28LD5200E (PW1L)
Block diagram 2/2
Downloaded From TV-Manual.com Manuals
25
Downloaded From TV-Manual.com Manuals
EU Tuner Transfer Board
EU-ENG295244G
ASIA Tuner Transfer Board
ASIA-ENG39616G
26
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
10
11
12
IF OUT
+5V
NC
GND
AFT OUT
RF AGC
VIDEO OUT
SDA(TUNER)
SCL(TUNER)
SIF OUT
NC
NC
CN2
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
10
11
12
CN2
CN1
CN1
NC
AGC
TU(NC)
ADR
SCL(IF)
SDA(IF)
NC
+5V
NC
+30V
NC
IF 1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
BV+5V
AUDIO-OUT
GND
AFT
AGC-OUT
VIDE-OUT
AGC-CONT
SW1
SW2
SIF-OUT
GAME-MODE
GND
GND
GND
GND
CN2
CN2
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
10
11
12
AGC
GND
GND
SCL
SDA
GND
V-supply+5V
GND
BTL+30V
GND
GND
GND
CN1
CN1
IF OUT
+5V
NC
GND
AFT OUT
RF AGC
VIDEO OUT
SDA(TUNER)
SCL(TUNER)
SIF OUT
NC
NC
NC
AGC
TU(NC)
ADR
SCL(IF)
SDA(IF)
NC
+5V
NC
+30V
NC
IF 1
BV+5V
AUDIO-OUT
GND
AFT
AGC-OUT
VIDE-OUT
AGC-CONT
SW1
SW2
SIF-OUT
GAME-MODE
GND
GND
GND
GND
AGC
GND
GND
SCL
SDA
GND
V-supply+5V
GND
BTL+30V
GND
GND
GND
TUNER
SUB POWER
GND
Vaux
NC
395VDC
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
GND
TX.RESET
SHV(15kHz)
SVD(15kHz)
GND
SCCD. BLK
SCCD. R
SCCD. G
SCCD. B
SCCD. SW
SCV(CCD)
GND
SY(CCD)
TUNER. DET1
TUNER. DET2
SCL1
SDA1
GND
SCL0
SDA0
GND
MCV/Y(CCD/TX)
MHD(15kHz)
MVD(15kHz)
GND
MCCD/TX. B
MCCD/TX. G
MCCD/TX. R
MCCD/TX. BLK
GND
GND
MSP.RESET
MSP.STATUS
GND
TV.R
GND
TV.AFC
GND
FE. AGCO
FE. AGCI
FE. MUTE
FE. MONO
FE. MODE
FE. SAP
GND
3D+3.3V
A+9V
3D+3.3V
A+9V
A+6V
GND
FE+30V
GND
GND
GND
GND
TV.CV
GND
TV.L
STB5V
GND
AC(L)
NC
AC(N)
GND
Vaux
NC
395VDC
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
GND
TX.RESET
SHV(15kHz)
SVD(15kHz)
GND
SCCD. BLK
SCCD. R
SCCD. G
SCCD. B
SCCD. SW
SCV(CCD)
GND
SY(CCD)
TUNER. DET1
TUNER. DET2
SCL1
SDA1
GND
SCL0
SDA0
GND
MCV/Y(CCD/TX)
MHD(15kHz)
MVD(15kHz)
GND
MCCD/TX. B
MCCD/TX. G
MCCD/TX. R
MCCD/TX. BLK
GND
GND
MSP.RESET
MSP.STATUS
GND
TV.R
GND
TV.AFC
GND
FE. AGCO
FE. AGCI
FE. MUTE
FE. MONO
FE. MODE
FE. SAP
GND
3D+3.3V
A+9V
3D+3.3V
A+9V
A+6V
GND
FE+30V
GND
GND
GND
GND
TV.CV
GND
TV.L
VIDEO
1
2
STB5V
GND
1
2
1
2
3
CN-6
AC(L)
NC
AC(N)
CN-5
1
2
3
4
CN-4
CN6-1
1
2
3
CN5-1
1
2
3
4
CN4-1
POWER
10V
GND
STB5V
GND
Power go
LEDOFF
1
2
3
4
5
JOINT
EFP2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
31
41
32
42
33
43
34
44
35
45
36
46
47
37
48
38
49
39
50
40
51
41
52
42
53
43
54
44
55
45
46
56
47
57
48
58
49
59
50
60
51
61
52
62
53
63
54
64
55
65
56
66
57
67
58
68
59
69
60
70
71
51
72
52
73
53
74
54
75
55
76
56
77
57
78
58
79
59
80
60
AVDET2
AVC.RXD
WSS
AV.LINK
GND
H.FREQ
V.FREQ
GND
MCV.SYNC
GND
SCV.SYNC
GND
MY
MPB
MPR
GND
MH
MV
GND
SY
SPB
SPR
GND
SH
SV
GND
TV.POWER
GND
L
GND
R
GND
AVC.TXD
REM-PDP
PDDET
S.TXD
S.RXD
RES
+5V
FEW
MD2
FCK
AVC.PARITY
RXD
BUSY
Vpp
SCLK
TXD
CNVSS
RESET
TUNER.DET1
TUNER.DET2
VIDEO.DET1
VIDEO.DET2
TX.RESET
GND
A+6V
GND
STB+5V
GND
A+10V
GND
SCL0
SDA0
DIP.DET
MSP.RESET
MSP.STATUS
EVJ1
1
2
3
PCL1
1
2
3
4
5
6
7
8
9
10
11
12
13
EJP2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
FE+30V
GND
SCL1
SDA1
GND
TV.AFC
FE.AGCO
FE.AGCI
FE.MUTE
FE.MONO
FE.MODE
FE.SAP
FE.ST
30V
GND
GND
5V
5V
GND
GND
12V
12V
GND
GND
10V
10V
EVJ1
1
2
3
4
5
6
7
8
9
10
11
12
13
P808
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
STB 5V
GND
Power go
GND
Power Off
GND
GND
6V
6V
EJP1
P804
AVDET2
AVC.RXD
WSS
AV.LINK
GND
H.FREQ
V.FREQ
GND
MCV.SYNC
GND
SCV.SYNC
GND
MY
MPB
MPR
GND
MH
MV
GND
SY
SPB
SPR
GND
SH
SV
GND
TV.POWER
GND
L
GND
R
GND
AVC.TXD
REM-PDP
PDDET
S.TXD
S.RXD
RES
+5V
FEW
MD2
FCK
AVC.PARITY
RXD
BUSY
Vpp
SCLK
TXD
CNVSS
RESET
TUNER.DET1
TUNER.DET2
VIDEO.DET1
VIDEO.DET2
TX.RESET
GND
A+6V
GND
STB+5V
GND
A+10V
GND
SCL0
SDA0
DIP.DET
MSP.RESET
MSP.STATUS
FE+30V
GND
SCL1
SDA1
GND
TV.AFC
FE.AGCO
FE.AGCI
FE.MUTE
FE.MONO
FE.MODE
FE.SAP
FE.ST
STB5V
AC.CLOCK
GND
30V
GND
GND
5V
5V
GND
GND
12V
12V
GND
GND
10V
10V
STB 5V
GND
Power go
GND
Power Off
GND
GND
6V
6V
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
10
EAF1
EAJ1
5V
LEDOFF
GND
GND
+12V
+12V
L
GND
R
GND
MUTE
SPRLY
AUDRST
AUDDET
SCL
SDA
STB5V
REM
GND
LED1(R)
LED2(G)
LEDOFF
5V
LEDOFF
GND
GND
+12V
+12V
L
GND
R
GND
MUTE
SPRLY
AUDRST
AUDDET
SCL
SDA
AUDIO
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
10
ADKEY1
ADKEY2
ADKEY3
GND
LED/REM
1
2
3
4
CN-1
EFA1
12V
12V
GND
GND
RARA+
GND
RBRB+
GND
RCRC+
GND
RCLKRCLK+
GND
RDRD+
GND
CTL
ECONT
1
2
3
4
5
6
STB5V
REM
GND
LED1(R)
LED2(G)
LEDOFF
ADKEY1
ADKEY2
ADKEY3
GND
EFL1
1
2
3
4
KEY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
EFK1
CN1
16
17
13
14
2
3
1
4
5
6
7
8
19
9
10
26
11
12
31
20
15
18
21
22
23
24
25
27
28
29
30
12V
12V
GND
GND
RARA+
GND
RBRB+
GND
RCRC+
GND
RCLKRCLK+
GND
RDRD+
GND
CTL
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
EPM1
PANEL
1
2
3
4
5
6
GND
TXD
RXD
RES
+5V
FEW
MD2
FCK
GND
RXD
BUSY
VPP
VDD
SCLK
TXD
CNVSS
RESET
MY
GND
MCb
GND
MCr
GND
SY
GND
SCb
GND
SCr
GND
GND
MH
MV
AVDET2
AVC.RXD
AVC.TXD
REM-PDP
PDDET
SH
SV
GND
L
GND
R
GND
AVC.PARITY
FE.MODE
FE.MONO
FE.SAP
FE.ST
FE.MUTE
WSS
MCV.SYNC
SCV.SYNC
GND
COMP.HD
COMP.VD
GND
DIP.DET
FANDET
T.DET1
T.DET2
V.DET1
V.DET2
GND
AV-LINK
AC.CLOCK
FE..AGC.OUT
GND
SCL0
SDA0
GND
SCL1
SDA1
GND
TEXT.RST
MSP.RST
MSP.ST
TV.AFC
FE.AGC.IN
6V
6V
GND
GND
3.3V
3.3V
GND
GND
1.8V
1.8V
GND
TV-POWER
10V
GND
STB5V
GND
Power go
LEDOFF
ON/OFF
VADJ
GND
GND
12V
12V
GND
GND
GND
CN-1
S12B-PH-SM
1 Vcc 16V
2 Vcc 16V
3 Vcc 16V
4 Vcc 16V
5 ON/OFF
6 GND
7 GND
8 VADJ
9 GND
10 GND
11 GND
12 GND
EJA1
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
GND
S.TXD
S.RXD
RES
+5V
FEW
MD2
FCK
EFG2
1
2
3
4
5
6
7
8
9
EJF6
EFG1
GND
RXD
BUSY
VPP
VDD
SCLK
TXD
CNVSS
RESET
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
10
11
12
EJF5
EFJ4
1
2
3
4
5
6
7
8
9
10
11
12
MY
GND
MCb
GND
MCr
GND
SY
GND
SCb
GND
SCr
GND
EJF4
GND
MH
MV
AVDET2
AVC.RXD
AVC.TXD
REM-PDP
PDDET
SH
SV
GND
L
GND
R
GND
AVC.PARITY
FE.MODE
FE.MONO
FE.SAP
FE.ST
FE.MUTE
WSS
MCV.SYNC
SCV.SYNC
GND
COMP.HD
COMP.VD
GND
DIP.DET
FANDET
T.DET1
T.DET2
V.DET1
V.DET2
GND
AV-LINK
AC.CLOCK
FE..AGC.OUT
EFJ3
1
2
3
4
5
6
7
8
9
10
11
EFJ2
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
GND
SCL0
SDA0
GND
SCL1
SDA1
GND
TEXT.RST
MSP.RST
MSP.ST
TV.AFC
FE.AGC.IN
6V
6V
GND
GND
3.3V
3.3V
GND
GND
1.8V
1.8V
GND
EJF3
1
2
3
4
5
6
7
8
9
10
11
EJF2
1
2
3
4
5
6
7
1
2
3
4
5
6
7
TV-POWER
EFJ1
EJF1
1
2
3
4
1
2
3
4
ON/OFF
VADJ
GND
GND
EFP1
P805
12V
12V
GND
GND
GND
1
2
3
4
5
FORMAT
P806
CN-1
P802
S12B-PH-SM
1 Vcc 16V
2 Vcc 16V
3 Vcc 16V
4 Vcc 16V
5 ON/OFF
6 GND
7 GND
8 VADJ
9 GND
10 GND
11 GND
12 GND
Inverter
PAS4
1
2
3
EAS2
1
2
3
NC
RCH+
RCH-
LCH+
LCH-
NC
RCH+
RCH-
SPEAKER (R)
1
2
LCH+
LCH-
1
2
SPEAKER (L)
PAS3
EAS1
28LD5200E (PW1L)
9. Connection diagram
28LD5200E (PW1L)
10. Wiring diagram
ECONT
32
22
AUDIO board
INVERTER UNIT
EJP1
P802
EJP2
21
P803
37
86
EJF1
EAF1
EJF3A
EJF2
To Panel
EJA1
EAJ1
38
EJF5
EAS2
SUB POWER board
POWER board
25
TO SP (Right)
86
JOINT board
EAS1
CN1
P804
EJF4
EJF6
CN6-1
CN5
CN4
CN2
30
CN4-1
EFJ2
EFJ1
EFJ4
EFA1
EFL1
EFK1
EFG1
26
27
29
EFP1
EFJ3
CN5-1
EFG2
23
EFP2
24
86
FORMATTER board
EPM1
INLET board
86
33
SW902 SW901
CN6
34
P806
P901
P903
POWER SW
Downloaded From TV-Manual.com Manuals
CN1
LED board
P804
P808
31
27
28LD5200E (PW1L)
11. Disassembly diagram
The codes in brackets shown in the wiring diagram express the name of materials.
The key to the codes and materials is shown on the table below.
2%
Code
Material
ABS
PC
ACRYLONITRILE BUTADIENE STYRENE
POLYCARBONATE
#$5
#$5
Downloaded From TV-Manual.com Manuals
28
Hitachi, Ltd. Tokyo, Japan
International Sales Division
THE HITACHI ATAGO BUILDING,
No. 15 –12 Nishi Shinbashi, 2 – Chome,
Minato – Ku, Tokyo 105-8430, Japan.
Tel: 03 35022111
HITACHI EUROPE LTD,
Whitebrook Park
Lower Cookham Road
Maidenhead
Berkshire
SL6 8YA
UNITED KINGDOM
Tel: 01628 643000
Fax: 01628 643400
Email: consumer [email protected]
HITACHI EUROPE S.A.
364 Kifissias Ave. & 1, Delfon Str.
152 33 Chalandri
Athens
GREECE
Tel: 1-6837200
Fax: 1-6835964
Email: [email protected]
HITACHI EUROPE GmbH
Munich Office
Dornacher Strasse 3
D-85622 Feldkirchen bei München
GERMANY
Tel: +49-89-991 80-0
Fax: +49- 89-991 80-224
Hotline: +49-180-551 25 51 (12ct/min)
Email: HSE- [email protected]
HITACHI EUROPE S.A.
Gran Via Carlos III, 86, planta 5
Edificios Trade - Torre Este
08028 Barcelona
SPAIN
Tel: 93 409 2550
Fax: 93 491 3513
Email: [email protected]
HITACHI EUROPE srl
Via Tommaso Gulli N.39, 20147
Milano, Italia
ITALY
Tel: +39 02 487861
Tel: +39 02 38073415 Servizio Clienti
Fax: +39 02 48786381/2
Email: [email protected]
HITACHI Europe AB
Box 77 S-164 94 Kista
SWEDEN
Tel: +46 (0) 8 562 711 00
Fax: +46 (0) 8 562 711 13
Email: [email protected]
HITACHI EUROPE S.A.S
Lyon Office
B.P. 45, 69671 BRON CEDEX
FRANCE
Tel: 04 72 14 29 70
Fax: 04 72 14 29 99
Email: [email protected]
HITACHI EUROPE LTD (Norway) AB
STRANDVEIEN 18
1366 Lysaker
NORWAY
Tel: 67 5190 30
Fax: 67 5190 32
Email: [email protected]
HITACH EUROPE AB
Egebækgård
Egebækvej 98
DK-2850 Nærum
DENMARK
Tel: +45 43 43 6050
Fax: +45 43 60 51
Email: [email protected]
HITACHI EUROPE AB
Neopoli / Niemenkatu 73
FIN-15140 Lahti
FINLAND
Tel : +358 3 8858 271
Fax: +358 3 8858 272
Email: [email protected]
Hitachi Europe Ltd
Bergensesteenweg 421
1600 Sint- Pieters-Leeuw
BELGIUM
Tel: +32 2 363 99 01
Fax: +32 2 363 99 00
Email: [email protected]
HITACHI EUROPE LTD
Na Sychrove 975/8
101 27 Pr aha 10 – Bohdalec
CZECH REPUBLIC
Tel: +420 267 212 383
Fax: +420 267 212 385
Email: [email protected]
www.hitachidigitalmedia.com
Downloaded From TV-Manual.com Manuals