Download ELI-EFB_QS - eLine Technology

Transcript
On-Screen Display (OSD) Settings
Connections
On the OSD control device on the back of the body, hit the
center button to activate the OSD settings.
1. Use a BNC connector to connect the camera’s VIDEO OUT to the monitor’s (or DVRs) VIDEO IN. Use the following
recommendations for cable types and distances:
Exposure
LENS
HBL C/D-WDR
ELC/DC
BLC/HLI/D-WDR
AGC
3D DNR
OFF / LOW / MIDDLE / HIGH
OFF / LOW / MIDDLE / HIGH
SENSE-UP
AUTO / OF F / X2 / X4 / X8 / X16
/ X32 / X64 / X128 / X256 / X512
EXIT
Color
WB MODE
Day & Night
R-Y-GAIN
B-Y-GAIN
EXIT
D&N MODE
Function
Motion
Privacy
Setup
System
Exit
ATW / MANUAL / AWC>PUSH /
AWC
0-256
0-256
AUTO / COLOR / B&W / EXT
MIRROR
SHARPNESS
LSC
MOTION
ON / OFF
0-30
ON (0-30) / OFF
ON / OFF
AREA SEL
SENSITI
DISPLAY
HOLD TIME
ALARM
EXIT
MASK1MASK8
TITLE
DPC
TOP / BOTTOM / LEFT / RIGHT
0-30
OFF / ICON / TRACE
0-15 Unit: sec
ON / OFF
OLPF
MONITOR
GAMA
EXIT
CAMERA ID
COMMUNI
LANGUAGE
EXIT
FACTORY SET
SAVE & EXIT
EXIT
ON / OFF
OFF / ON 64 characters
OFF / MANUAL:WHITE THR 0255 / BLACK THR 0-255 / DPC
LEVEL 0-255
650 / 850
CRT / LCD
0.45 / 0.60 / 1.0 / USER
0-255
PROTOCOL PELCO-D
BAUDRATE: 2400 / 4800 / 9600
bps
Chinese / English
Type of Coaxial Cable
Recommended Max
Cable Length
RG-59/U
250 M
825 ft
Maximum Cable Length
RG-6/U
500 M
1650 ft
RG-11/U
600 M
1980 ft
RG-15/U
800 M
2640 ft
2. The power is DC 12V (+/- 10%) / 350mA. Use the following recommendations for cable types and distances:
12V DC Recommended Wire Size and Resistance (68°F)
#22
#20
#18
Copper Wire Size
#24
2
2
2
2
(0.33 mm )
(0.52 mm )
(0.83 mm )
(AWG)
(0.22 mm )
Resistance (Ω/m)
0.078
0.050
0.03
0.018
Resistance (Ω/ft)
0.024
0.015
0.009
0.005
Use the formula below to calculate the power cord and power supply. “L”, “R”, “VA”, “I” shall satisfy the inequality below:
10.8 V DC ≤ VA - 2 (R x I x L) ≤ 16 V DC
L = Cord length (m or ft)
R = Resistance of copper wire (Ω/m or Ω/ft} VA = DC output voltage of power supply unit
I = DC current consumption (A).
3. Connect power supply to the camera’s POWER IN terminal.