Download downloaded

Supported CIP objects
Bit
Status attribute
Extended device status (Bit 4-7)
Bit 0
Owned, shall be set when at least one connection is configured
0000 = Unknown
Bit 1
Reserved, set to 0
0010 = Faulted I/O connection
Bit 2
Configured (1)
0011 = No I/O connection established
Bit 3
Reserved, set to 0
0100 = Non volatile configuration bad
Bit 4-7
See extended device status
0101 = Major Fault
Bit 8
Is set for minor recoverable faults (2)
0110 = Connection in run mode
Bit 9
Is set for minor unrecoverable faults (2)
0111 = Connection in idle mode
Bit 10
Is set for major recoverable faults (2)
Bit 11
Is set for major unrecoverable faults (2)
Bit 12-15 Reserved, set to 0
(1) This bit shows if the product has other settings than "out-of box". The value is set to true if the module's NV storage is changed from
default and the value is currently in use.
(2) See error codes table below.
Error codes
Fault type
Fault source
Minor Recoverable Faults
Duplicate MACID, Switch value changed
Minor Unrecoverable Faults
Major Recoverable Faults
Non-Volatile Fault (CRC-error on read), Faulted, Connection to ATV312 lost
Major Unrecoverable Faults
Non-Volatile Fault (CRC-error on write)
34
S1A10387 01/2010