Download USER`S MANUAL

DRAFT
Revision History
Document Number
Date
Changes
DA00062401
6 February 2004
Initial release version covering prototype cameras only.
DA0006240b
7 June 2004
PRELIMINARY version covering series cameras.
DA00062402
16 July 2004
Initial release version covering series production cameras.
DA00062403
30 August 2004
Corrected the video data output type field in Section 1.3.
Corrected the maximum power consumption in Sections 1.3 and 2.8.
Corrected the length of the camera housing in Section 1.3.
Added a note in Section 3.12.
Corrected the drawings in Section 5.
DA00062404
7 October 2004
Added A404k info.
DA00062405
18 March 2005
Added A400kc info
Corrected Table 2-1 (functions of pins 7, 20, 8, 21)
Corrected Sections 3.12.1, 3.12.2, 3.12.4.
Modified in Section 4.2.2.2 descriptions of raw gain and raw offset
(settings from 0% to 100%)
Removed sample code in Section 4.4.
Added a note in Section 4.4.
DA00062406
14 April 2005
In Section 4.2.2.2, the ID for the flash trigger output mode „Always
high“ is 0x03 and not 0x04.
DA00062407
21 July 2005
General: Removed „Monochrome Versions Only“ in PRNU Shading
Correction description.
Replaced Figure 1-3.
Added „In the color version, PRNU shading correction is executed for each color separately.“ in Section 3.6.3.
Replaced „Effective Exposure Time“ by „Exposure Time“ in Figures
3-8 ”Rolling Shutter” and 3-9 ”Flash Window”.
Corrected starting column entries in the AOI list (actual value minus
one) in Section 3.8.4 ”Programmable AOI Sequencer”.
Introduced the AOI Editor in Section 3.8.4.2 ”Creating an AOI List”.
Replaced "The 4 bytes in this field..." by "The 2 bytes in this field..."
in tables "Area of Interest Width in Columns CSR" and "Area of Interest Height in Line CSR" in Section 4.2.2.2.
Added Section 6.3 ”Before Calling Basler Technical Support”.
BASLER A400k
i