Download Accessory Pack User Manual

 GETTING STARTED
Accessory Pack Overview
The Bio-Well Accessory pack contains attachments that will allow you to perform
Environment scans and calibrate your Bio-Well device. In order to conduct these
functions, you must have the Bio-Well device and a Bio-Well Subscription Plus
(or above) subscription. For more information on subscriptions, visit www.BioWell.com.
The Bio-Well Accessory Pack contains
the following items:
-
Grounding Cable
-
Titanium Cylinder
CALIBRATING YOUR DEVICE
Calibration Overview
If you require your scan results to be 100% accurate (scientifically), then you
should calibrate your device once per month. Other times you should calibrate
your device are:
-
The first time the device is used
-
The device is used on a new
computer
-
Large shifts in weather are
experienced
-
Meteorological testing is
conducted
Setting up Calibration
In order to do calibrate your Device, you will need the following items:
-
Bio-Well Device
-
Bio-Well Software
-
Titanium Cylinder
-
Grounding Cable
1. To connect your Bio-Well device to your computer, connect one end
of the USB cable to the back of the Bio-Well device where the USB icon
is indicated. Connect the opposite end of the USB cable to a computer.
2