Download User Guide

Channel Mode
Press the ENTER button and turn jog wheel up to when the
Channel Mode
is shown
on the monitor. Pressing ENTER button and the display will blink. Use jog wheel to select
the (16 Channel) or (22 Channel) mode. Once the mode has been selected, press the
ENTER button to setup or automatically return to the main functions without any change
after 10 seconds. To go back to the previous functions without any change press the ESC
button.
StandBy Mode
Press the ENTER button and turn jog wheel up to when the
StandBy Mode
is shown
on the monitor. Pressing ENTER button and the display will blink. Use jog wheel to select
the (yes standby) or (no standby) Mode. Once the mode has been selected, press the
ENTER button to setup or automatically return to the main functions without any change
after 10 seconds. To go back to the previous functions without any change press the ESC
button.
Show Mode
Press the ENTER button and turn jog wheel up to when the
Show Mode
is shown on
the monitor. Pressing ENTER button and the display will blink. Use jog wheel to change the
Show Mode (1~4). Once the mode has been selected, press the ENTER button to setup or
automatically return to the main functions without any change after 10 seconds. To go back
to the previous functions without any change press the ESC button.
Slave Mode
Press the ENTER button and turn jog wheel up to when the
Slave Mode
is shown on
the monitor. Pressing ENTER button and the display will blink. Use jog wheel to select the
(Normal) or (2 light show) Mode. Once the mode has been selected, press the ENTER
button to setup or automatically return to the main functions without any change after 10
seconds. To go back to the previous functions without any change press the ESC button.
Adjust Focus 1
Press the ENTER button and turn jog wheel up to when the
Adjust Focus 1
is shown
on the monitor. Pressing ENTER button and the display will blink. Use jog wheel to change
the focus 1 (0-255). Once the mode has been selected, press the ENTER button to setup or
automatically return to the main functions without any change after 10 seconds. To go back
11A