Download APPLICATION SOFTWARE USER`S MANUAL TARGET
Transcript
CAPTURE Capture Frame is the frame rate per second that Hicap series display videos on the Main software in our application. You can add more frame rate on any channel after you reduce frame rates from other channels in the same Recording chip group. So, it displays and records videos at Capture Frame rate as it is set. Continuous Recording Frame is used only when you schedule RECORD SCHEDULE with a Continuous mode while Sensor, Motion, Audio, and Sensor & Motion recording modes will record videos at Capture Frame rate. Continuous Recording Frame cannot be higher than Capture Frame so it depends on the Capture Frame rate. Unlike Hicap series, the display of MIG4ch, MID and MIS series just provide real-live display for monitoring. In these models, Capture Frame does not have any relationship with their Live display at all but only with recording modes. Note that if there is no camera connection; please do not select “Enable Camera”. If you select enable camera which really have no camera input, it might cause unexpected operation 19