Download Getting Started

Operation
Spectral Products
S2ADJ
Adjusts exit slit to a given width.
To DK240/480:
From DK240/480:
To DK240/480:
From DK240/480:
DK240/480 Action:
From DK240/480:
<32> D
<32> D
<High Byte> <Low Byte>
<Status byte>
If valid, adjusts the exit slit.
<24> D
S3ADJ (DK242 0nly)
Adjusts middle slit to a given width.
To DK240/480:
From DK240/480:
To DK240/480:
From DK240/480:
DK240/480 Action:
From DK240/480:
<34> D
<34> D
<High Byte> <Low Byte>
<Status byte>
If valid, adjusts the middle slit.
<24> D
S1CAL
Allows for entrance slit calibration. Uses the same procedure as GCAL but with a two byte slit width specifier.
To DK240/480:
From DK240/480:
To DK240/480:
From DK240/480:
DK240/480 Action:
From DK240/480:
<22> D
<22> D
<High Byte> <Low Byte>
<Status byte>
No immediate action.
<24> D
S2CAL
Allows for exit slit calibration. Uses the same procedure as GCAL but with a two byte slit width specifier.
To DK240/480:
From DK240/480:
To DK240/480:
From DK240/480:
DK240/480 Action:
From DK240/480:
<23> D
<23> D
<High Byte> <Low Byte>
<Status byte>
No immediate action.
<24> D
S3CAL (DK242 only)
Allows for middle slit calibration. Uses the same procedure as GCAL but with a two byte slit width specifier.
To DK240/480:
From DK240/480:
To DK240/480:
From DK240/480:
DK240/480 Action:
From DK240/480:
<35> D
<35> D
<High Byte> <Low Byte>
<Status byte>
No immediate action.
<24> D
Spectral Products
200 Dorado Place SE Albuquerque, NM 87123
Phone (877) 208-0245 Fax (505) 298-9908
18