Download ControlNet Adapters - RS Components International

Getting Started
Required Equipment
Equipment Shipped with the Adapter
When you unpack the adapter, verify that the package includes:
❑ One ControlNet adapter
❑ A 2.54 cm (1 in.) and a 15.24 cm (6 in.) Internal Interface cable
(only one cable is needed to connect the adapter to the drive)
❑ This manual
User-Supplied Equipment
To install and configure the ControlNet adapter, you must supply:
❑ A small flathead or Phillips screwdriver
❑ Configuration tool, such as:
– PowerFlex HIM
– DriveExplorer (version 2.01 or higher)
– DriveExecutive (version 1.01 or higher)
– RSNetWorx for ControlNet (version 3.00 or higher)
❑ Controller configuration software
(Examples: RSLogix 5, RSLogix 500, or RSLogix 5000)
❑ A PC connection to the ControlNet network
(Examples: 1784-PCC, 1770-KFC, or 1784-KTCX)
1-3