Download GENESYS 2004 Enterprise Simulation
Transcript
SPECTRASYS (System) DATA ! All data is Relative to Nominal Values ! If FREQ is 0, data is Single Sideband offset. ! Freq Power Phase !(Units) (dBc) (Degrees) 0.51 -30 0 10 -50 0 100 -70 0 1000 -80 0 10000 -90 0 100000 -95 0 1e6 -100 0 ENDDATA NOISE Broadband noise can be added to any CW, Modulated, or User Defined source. Noise is added to these sources by checking the “Broadband Noise” checkbox. Noise is specified by upper and lower frequency limits and spectral density. The noise spectral density is the power in dBm in a 1 Hz bandwidth. For a noise-only source, the user can un-check the “Include Signal” checkbox. Source Parameter Tuning Every source parameter can be tuned by placing a question mark in front of the parameter. Summary All sources in SPECTRASYS have bandwidth and spectral density. Sources have a center frequency, bandwidth, power level, phase shift, and number of points. All sources are defined in the frequency domain. • Sources are Modeled in the Frequency Domain 131
Related documents
GENESYS 2003 Enterprise Simulation
Simulation - Agilent Technologies
instalación - CaptiveAire
Simulation - Agilent Technologies
Commodore Free issue82
ADS - Sonnet Software
IFBR1a Manual - Lectrosonics.com
System 10 PRO Datasheet - Audio
User Manual
MW82119A User Manual
installation - CaptiveAire
5 - Casmar