Download general electromagnetic movement sensor

As a courtesy to those that may wish to customize the VIs, the source code is included in
the \source directory. To use these files, you must have at least the Professional version
of Labview 6.1 installed on your computer. Otherwise you may use the stand-alone
applications described above.
5.1.2 Main and configuration screens
In Figure 5.1, the main menu of the Labview program is shown. Before data can be
recorded or displayed, the hardware must be configured. This is why some of the buttons
are disabled (grayed out) – because in this screen the hardware has not yet been
configured. To configure the hardware for the first time, press “Configure DAQ” to open
Figure 5.1. Main screen of the Aliph data acquisition package.
Aliph GEMS User Manual
Page 21 of 40