Download 423 XIO 9040UC user manual_V1_0
Transcript
XIO 9040UC SD-SDI up converter User Manual V1.0 V1.0 www.gefei-tech.com Nov, 2011 Copyright Copyright © 2010 Beijing Gefei Tech. Co., Ltd all rights reserved. This document may not be copied in whole or in part. Trademarks Gefei-Tech, Magi, MIO, VIO, XIO, MVS, MRS are either registered trademarks or trademarks of Beijing Gefei Tech. Co., Ltd in China and/or other countries. Other trademarks used in this document are either registered trademarks or trademarks of the manufacturers or vendors of the associated products. Disclaimer Product options and specifications subject can be changed without notice. The information in this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Beijing Gefei Tech. Co., Ltd .Beijing Gefei Tech. Co., Ltd assumes no responsibility or liability for any errors or inaccuracies that may appear in this publication. Table of Content Ⅰ Description ....................................................................................1 Ⅱ XIO 9040UC input & output .......................................................2 Ⅲ XIO 9040UC rear panel.............................................................3 3.1 XIO 9040UC 3U rear panel diagram ........................................3 3.2 XIO 9040UC 1U rear panel diagram ........................................3 3.3 1U、3U instruction of rear panel interfaces ...........................4 Ⅳ XIO 9040UC detailed description.............................................4 4.1 Board status indicator.............................................................5 4.2 Board slot indicator ................................................................6 4.3 10 dip switch and adjustment / confirm button......................6 Ⅴ XIO 9040UC web control instruction ........................................8 Ⅵ XIO 9040UC Technical specification .......................................9 Ⅶ Contact Us................................................................................10 7.1 Technical support .................................................................10 7.2 Website ................................................................................10 7.3 Address.................................................................................10 XIO 9040UC User Manual V1.0 XIO 9040UC SD-SDI up converter Ⅰ Description XIO 9040XC is a SD-SDI up converter based on the newly XIO video & audio processing platform with high performance. The modular platform can be used to various processes, such as convert, display and distribution of 3G, SD/HD. XIO 9040UC is a convertible module, which can convert one SD-SDI to 2 channels’ HD-SDI, and supports synchronization(Analog composite or three levels sync. signals). It also can achieve the transformation between the HD-SDI format and frame frequency. The LED indicator shows signal information directly. The amplifier can be used together with XIO NET of managing network because of its inner setting SNMP protocol, it is also dedicated in real-time communication with third party monitoring via Ethernet to enable operator get working status easily. © Beijing Gefei Tech.Co.,Ltd 1 XIO 9040UC User Manual V1.0 Ⅱ XIO 9040UC input & output Input: 1 channel HD/SD-SDI 1 channel analog composite signal or Tri-level sync.signal Output: 1 channel HD/SD-SDI loop out 2 channels HD-SDI XIO 9040UC supports the following formats: SD: :525i60、625i50 HD: :720p60、720p59.94、720p50、1080i60、1080i59.94、 1080i50、1080p30、1080p29.97、1080p25 XIO 9040UC supports synchronization. The V-phase and H-phase can be adjusted. the single external phase lock supports the following sync. signals. Signal format 720p50 1080i50 1080p25 √ ---- √ ---- √ ---- √ √ √ 720p59.94 1080i59.94 ---- ---- √ ---- √ ---- Sync.signal Sync.signal type PAL-BB NTSC-BB Three level Signal format 1080p29.97 720p60 1080i60 1080p30 ------√ ------√ ------√ Sync.signal type PAL-BB NTSC-BB Three level ---√ ---- “√”——Support;“----”——Not support. XIO 9040UC: the global external phase lock (matched with XIO NET) supports the following sync. signals. Signal format 720p50 1080i50 1080p25 720p60 1080i60 1080p30 Sync.signal type © Beijing Gefei Tech.Co.,Ltd 2 XIO 9040UC User Manual V1.0 PAL-BB NTSC-BB Three level √ ---√ √ ---√ √ ---√ ------√ ------√ ------√ “√”——Support;“----”——Not support. Ⅲ XIO 9040UC rear panel 3.1 XIO 9040UC 3U rear panel diagram SD-IN BB-IN SD-Loop HD-OUT1 HD-OUT2 Figure 3-1 XIO 9040UC 3U rear panel diagram 3.2 XIO 9040UC 1U rear panel diagram SD-IN © SD-Loop Beijing Gefei Tech.Co.,Ltd HD-OUT2 3 XIO 9040UC User Manual V1.0 BB-IN HD-OUT1 Figure 3-1 XIO 9040UC 1U rear panel diagram 3.3 1U、 、3U instruction of rear panel interfaces SD-IN: HD/SD-SDI input interface. Input HD/SD-SDI signal. BNC connector, 1 channel. BB-IN: sync signal input interface. Input the sync signal. BNC connector, 1 channel. SD-Loop: HD/SD-SDI loop-out interface. Output the input signal. BNC connector, 1 channel. HD-OUT1, 2: HD-SDI output interface. It can output HD-SDI , which format is converted . BNC connector, 2 channels. Ⅳ XIO 9040UC detailed description © Beijing Gefei Tech.Co.,Ltd 4 XIO 9040UC User Manual V1.0 10 dip switch Board Status Indicator Adjustment / Confirm button Board Slot indicator Figure 4-1 XIO 9040XC card function 4.1 Board status indicator Name Color Meaning On: The external sync. signal is working BB_PRN Green Off: The external sync. signal is not connect, or the working status is internal sync. On: Global external synchronous signal (need matching XIO DVB_ASI Green asp.net) accesses and the board work status is external sync Off: Global external synchronous signal (need matching XIO asp.net) is not access and the board work status is internal sync SDI_LOCK Green On: the access of digital signal is normal Off: the access of digital signal is abnormal AUD_LOCK Green On: the embedded audio works normal Off: the embedded audio works abnormal SDI_ERR © Red Beijing Gefei Tech.Co.,Ltd On: the access of SD is normal On: the access of HD is normal, or there is no input signal 5 XIO 9040UC User Manual V1.0 20/24BIT On: Output SDI locked Green Off: Output SDI unlocked ADJ./NOR Green On: the tenth dialed switch is on “ON”(Adjustment status) Off: the tenth dialed switch is on “OFF”(Working status) A/M Green On: the first dialed switch is on “ON”(Auto status) Off: the first dialed switch is on “OFF”(Manually status) 4.2 Board slot indicator Name Color LED14 Green LED15 Green LED18 Green LED19 Green Meaning On: 8; Off: 0 On: 4; Off: 0 On: 2; Off: 0 On: 1; Off: 0 Remark: This indicator sequence is used to indicate the current module in the specific slots. It displays up to 16 slots by the combination of the “ON” and “OFF”. Add up these values which LED are “ON”, and add 1 at last. It’s the place slot of the board card。 4.3 10 dip switch and adjustment / confirm button To accomplish every function by apply the combination of these two switches. 10 dip switch: To choose different function by set the various combination of “ON” &“OFF”. Press-“ON”, Up-“OFF” Adjustment/confirm button: makes sure the setting is done by click the switch upward or downward. Click upward for continuous settings, click downward clicked for single-step settings. 10 Dip Switch Function setting: 序号 DIP Switch: 1 2 3 4 5 6 7 1 Step length is 1 M/A OFF OFF OFF OFF OFF +/- © Beijing Gefei Tech.Co.,Ltd 8 9 10 Adj/Normal 6 XIO 9040UC User Manual V1.0 2 3 4 5 6 Step length is 20 Global external phase lock Internal phase lock Single external phase lock H-phase adjustment M/A OFF OFF OFF OFF ON +/- Adj/Normal M/A OFF OFF OFF ON ON +/- Adj/Normal M/A OFF OFF ON OFF OFF +/- Adj/Normal M/A OFF OFF ON OFF ON +/- Adj/Normal M/A OFF OFF ON ON OFF +/- Adj/Normal M/A OFF OFF ON ON ON +/- Adj/Normal 7 V-phase adjustment 8 Output 720p50 M/A OFF ON ON OFF OFF +/- Adj/Normal 9 Output 720p60 M/A OFF ON ON OFF ON +/- Adj/Normal 10 Output 1080i50 M/A OFF ON ON ON ON +/- Adj/Normal 11 Output 1080i60 M/A OFF ON ON ON OFF +/- Adj/Normal 12 Output 1080p25 M/A ON OFF OFF OFF OFF +/- Adj/Normal 13 Output 1080p30 M/A ON OFF ON ON OFF +/- Adj/Normal 14 AFD (Auto) M/A ON ON OFF ON ON +/- Adj/Normal 15 Stretch M/A ON OFF OFF OFF ON +/- Adj/Normal 16 Bar M/A ON OFF OFF ON OFF +/- Adj/Normal 17 Crop M/A ON OFF ON OFF OFF +/- Adj/Normal 18 Save parameters M/A ON ON ON ON OFF +/- Adj/Normal 19 Access to users’ parameters M/A ON ON ON ON ON +/- Adj/Normal 20 Set the serial number in auto mode ON X X X X OFF OFF 21 Initial setting ON X X X X ON OFF Adj/Normal Adj/Normal Remarks: ⅰ Set the “Bit 1” at “ON”, Bit 0(10)at ”Off”, at the external network automatic management mode(Parameters can be adjusted by network control); ⅱ Set the Bit 10 at “ON”, the module at adjustment mode; ⅲ Set Bit 10 at “OFF” when it is working, or the signal stability will be influenced. iv “Set the serial number in auto mode” is used for internal debugging. User nedd not set. v ” Initial setting” will revert to the board factory defaults state. The default state is: Step length is 1, Single external phase lock, H-phase is 483, V-phase is 284, Output 625i50, AFD (Auto) © Beijing Gefei Tech.Co.,Ltd 7 XIO 9040UC User Manual V1.0 Ⅴ XIO 9040UC web control instruction XIO 9040UC can be used together with XIO NET of managing network because of its inner setting SNMP protocol, it is also dedicated in real-time communication with third party monitoring via Ethernet to enable operator get working status easily. Global external synchronous signal need matching XIO NET. It can set parameters by IE browser, and can communicate with third-party monitoring equipment. © Beijing Gefei Tech.Co.,Ltd 8 XIO 9040UC User Manual V1.0 Ⅵ XIO 9040UC Technical specification Digital video input: Input interface: 1*SDI, BNC connection Impedance: 75Ω Format: SD:SMPTE 259M-C; 270Mb/s HD:SMPTE 292M; 1.485Gb/s Self-adaptive of following: SD:525i60、625i50 HD:720p60、720p59.94、720p50、1080i60、1080i59.94、 1080i50、1080p30、1080p29.97、1080p25 Return loss: ﹥15dB,5MHz to 1.5GHz Max cable length: SD:﹤200m (Belden 1694A) HD:﹤100m (Belden 1694A) Reference input: Signal type: Analog composite sync.signal Input interface: 1*CVBS / Tri-level, BNC Type: PAL / NTSC / Tri-level Impedance: 75Ω Digital video output: : © Output interface: 3* SDI, including 1 SDI loop out, BNC connection Impedance: 75Ω Format: HD:SMPTE 292M; 1.485Gb/s Return loss: ﹥15dB, 5MHz to 1.5GHz Signal amplitude: 800mV±10% Overshoot: ﹤80mV Jitter: ﹤135ps (100KHz) Risen and fallen time: ﹤270ps Differential of risen and fallen time: ﹤100ps DC level displacement: 0V±500mV Beijing Gefei Tech.Co.,Ltd 9 XIO 9040UC User Manual V1.0 Ⅶ Contact Us 7.1 Technical support Tel: 010-58858188 Fax: 010-58858189 7.2 Website www.gefei-tech.com E-mail:[email protected] 7.3 Address Beijing Gefei Tech. Co., Ltd A-603 Power Creative Plaza NO.1 Shangdi E.Rd. Haidian District Beijing 100085 To find more information, please visit www.gefei-tech.com © Beijing Gefei Tech.Co.,Ltd 10