Download E1 On-Chip Debugging Emulator

Introductory Guide for the RX610 Group
1.
Introduction
This guide assumes that the user who purchased the E1 emulator as a unit is using a CPU board on which
an RX610-group MCU has been installed as the user system. However, the same operating procedures for
the E1 emulator can also be used with systems which incorporate other RX610-group MCUs.
By following the procedures in this guide, you can get some practical experience of installing the program
and simple usage of the E1 emulator.
This guide assumes that the machines and tools in use are as follows.
(1) Host computer
(2) E1 emulator
(3) CPU board on which an RX610-group MCU has been installed (R0K556100C000BE):
This CPU board is included in the Renesas Starter Kit for the RX610 (R0K556100S000BE).
R20AN0022EJ0100 Rev.1.00
Sep. 07, 2010
Page 2 of 66