Download Manual

Increasing the constant of the register with a single function key:
To increase a parameter (or constant) to a designated register, select a function key from the
key list and select the option button “Increase”. The constant parameter will increase by degrees
until reach the upper limit value. The example below can let the register D0 add 100 every time
when the key pressed, the upper limit value is FFFF (Hex).
Degression is similar. Users should set the lower limit value. Under the default condition, the Min
limit value is 0.
2.5.8 Data Display
This section will introduce how to make a Set parameter screen. The methods of setting the
components such as parameter display, parameter setting and password setting are discussed in
detail.
The procedure of making the screen:
→
Click [Tool] [New Screen] or click the screen description to pop up a dialog box for setting
the screen number and the screen description.
Screen Num:
The serial number of the new screen.
Screen Description
Descript the character of the new screen.
18