Download e-Gladiator Microwave Switch Data Sheet

Overview / Installation
Mounting
Gladiator Microwave Smart Switch Series
Overview
Correct Mounting Angle
Align Sender and Receiver
Correct Elevation
Rotate so that Visual Alignment Guide is in the same position on
both sender and receiver.
Maximum Signal Strength to Receiver is indicated by maximum
brightness of Green LED on Receiver.

Sending Unit
Receiving Unit
Microwave Beam
Incorrect Elevation
Sending Unit
Receiving Unit

>
<
Installation with Adjustable Mounting
Blocked Chute Mounting
MAIN PRODUCT FLOW
Receiving Unit
Sending Unit
Position blocked
chute detectors
to one side of
main product flow
Mounting with Windowed Weldments
Flow/No Flow
Metal Bin/Chute Walls
MAIN PRODUCT
4” UHMW Windowed Weldment
FLOW
Sender
Receiver
Fabricated Bracket
9
Position and aim
fabricated brackets to separate structure
flowAttach
sensors
Flow/No Flow Switch
if bin/chute walls are subject to high vibration
toward
main
Housing can be rotated
within 200º after the
mounting thread is
tightened, to allow cable
entries to face downwards
or allow optimal cable
clearance.