Download DOSIMASS Software Manual

Error! Style not defined.
4.3.1
Dosimass DM
Tabs
The different types of parameters regrouped under a single tab are as follows:
Potential Activation of alarms and alerts.
Measures and Threshold values relative to the principal
measurements.
Measures and Threshold values relative to the secondary
Measurements.
Parameters linked to:
The activation and assignment of the Dosimeter;
The initialization conditions; and,
The Dosimeter Events History.
Information linked to the operating state of the Dosimeter:
Operating mode;
Dosimeter management;
Battery status; and Internal operating fault s
Parameters that enable the adaptation of the Dosimeter to
the specific needs of the user.
Parameters that relate to the calibration of the Dosimeter.
Cumulative readings on dose and duration related to entry /
exit periods in the sub zones.
Parameters that allow the customization of the Dosimeter
display when in the ‘pause’ mode.
Predefined messages for use as a «mini-pager.»
Parameters linked to the internal operation of the Dosimeter.
Information related to the Events History Index.
Enables reading of the contents of the E2PROM.
54
128110A
Publication, traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites, sauf autorisation écrite de nos services.
The publication, translation or reproduction, either partly or wholly, of this document is not allowed without our written consent. Format 112175C